List Price: $261.93
Sale Price: $180.02
Today's Bonus: 31% Off
I use this heater in a relatively unisulated (only 1.5" thick fiberglass on steel building walls) 1260 sq ft building (30'x42'x14'). It has an easy starting push-pin and an easy to rotate knob for adjustment of high/low. There isn't much sound difference between high/low, but there is definitely less gas usage on settings less than high.
The manual recommended checking all the fitting connections on the included hose for leaks. I kinda took that for granted assuming the unit should be perfect. After 2-3 uses found a leak at one of the fittings. It was quickly corrected with removal and re-installation using thread sealant, but it just goes to show that reading the manual and following the directions are always a safe bet.
Like any open propane heater, this unit has no way of venting out doors so you want to make sure and use an appropriate Carbon Monoxide detector along with proper ventilation of the enclosed space. I have a CO detector that plugs into the wall, but mostly I just don't leave the heater on for more than an hour max, and make sure to ventilate/get outside every once in a while when working in the cold condtions.
Excellent quality overall. Follow the directions and you should have no issues.
Click Here For Most Helpful Customer Reviews >>
I live in Kansas where the winter is always from 0 to 30, my 3 car garage is half finished with r19 and no drywall. Need to work in the garage, usually it's about 10 degrees warmer then the temp outside. 22'w X 30'l x 11' h. cracked the back door to the garage and fired it up on low for about 20 minutes it was comfortable for jeans and sweatshirt. Easy hook up, fittings do not seem to be leaking at this time but will keep a look out. Slight propane smell but was expected. All in all Good Buy!
No comments:
Post a Comment