Showing posts with label raypak pool heater. Show all posts
Showing posts with label raypak pool heater. Show all posts

Friday, December 12, 2014

Reviews of Calesco Softside Waterbed Heater with a 4oz Premium Clear Bottle

Calesco Softside Waterbed Heater with a 4oz Premium Clear Bottle Waterbed Conditioner & Patch Kit for King, Queen, Full & Twin Soft Side Water Bed Mattresses
Customer Ratings: 3.5 stars
Buy Now
We replaced a broken heater with this new one, and really like it. It has three heat settings (as opposed to just having a thermometer to set it at the temperature), and the cord is longer than the one we had previously. Works great!

Click Here For Most Helpful Customer Reviews >>

Replaced an old, non-working, waterbed heater with this one and the bed is now nice and warm and inviting each evening. Works well, what more is there to say?

Best Deals for Calesco Softside Waterbed Heater with a 4oz Premium Clear Bottle

I had it under operation for 8 days. temp did not get over 81 degrees. I got a return ok and mailed it back to them. waiting on

return credit. It might be my fault for ordering the wrong one.

Buy Fom Amazon Now

Saturday, November 15, 2014

Review of Optimus H5300b Black Heater Quartz And Convection Radiant

Optimus H5300b Black Heater Quartz And Convection Radiant
Customer Ratings: 5 stars
Buy Now
I NEEDED A HEATER THAY WOULD QUICKLY HEAT MY SUNROOM DURING THE WINTER MONTHS AND THIS ONE FILLED ALL MY HOPES.

THE SITE WAS EASY TO NAVIGATE AND THE PRICES WERE VERY RESONABLE.

THE MERCHANDISE WAS DELIVERED ON TIME.

I WILL RECOMMEND THIS SITE TO OTHERS AND WILL BE SHOPPING HERE AGAIN IN THE FUTURE.

Click Here For Most Helpful Customer Reviews >>

Friday, October 24, 2014

Discount Mr. Heater F270270 MH75KTR Contractor 75,000-BTU Forced-Air

Mr. Heater F270270 MH75KTR Contractor 75,000-BTU Forced-Air Kerosene Heater
Customer Ratings: 5 stars
List Price: $369.62
Sale Price: $232.81
Today's Bonus: 37% Off
Buy Now

I got this unit right around Christmas for a great price from Amazon. It is multipurpose fuel ready, so instead of paying out the nose for Kerosene, I've been using diesel fuel in it, and it works just beautifully. Great for thawing out cars in the shop or heating up a space enough that you can perform some emergency maintenance in the dead of winter.

Click Here For Most Helpful Customer Reviews >>

My old kerosene heater stopped working and I needed a replacement quickly. I saw this unit on sale for a great price so I decided to wait the extra few days for shipping rather than going to the store the same day. My old heater was 60,000 BTU and I paid $180 12 years ago. I had built a wooden stand for it so I could wheel it around my shop. First, this new unit is the exact size as my old one so it fit in the stand perfectly. Second, this unit is 75,000 BTU and I paid less than my old one. Third, it has an on/off switch and a thermostat, unlike my old one. And fourth, it starts up immediately. My old one took awhile I wasn't always sure if it were going to start or not. I couldn't be more please with it.

Best Deals for Mr. Heater F270270 MH75KTR Contractor 75,000-BTU Forced-Air

I needed a heater and called to rent one. I needed it for three days and found out the rental place charged $32 a day to rent. I was pressed for time because it was Tuesday and I desperately needed one for the up coming weekend. They informed me that they rented on a first come first serve basis, therefore there could be a chance I might not be able to get one anyway. I searched on-line to find one that was affordable and found this one on Amazon. The price of the heater was what it would cost me to rent one for three days. After reading the reviews of how quickly others who ordered one got their heater, I decided to give the company a try. I ordered it that Tuesday, and when Friday afternoon came (2:30 PM when it was time for me to go to work)it wasn't here. I went to work disappointed. When I returned home at 3AM there was a note on my front door informing that the heater was sitting on the side of my house hidden behind the garbage cans. Needless to say, I was over joyed. Not only was I able to complete my project over the weekend, it keep my garage at the temperature I needed for 10 hours straight on one tank of kerosene. I highly recommend this heater, and this company. RIGHT ON TIME!!!

Honest reviews on Mr. Heater F270270 MH75KTR Contractor 75,000-BTU Forced-Air

REALLY PUTS OUT THE HEAT! We actually put diesel and kerosene in it... I think I need a few more each each of my hobbie spots!

Find helpful customer reviews and review ratings for Mr. Heater F270270 MH75KTR Contractor 75,000-BTU Forced-Air

Please e-mail NAFTA certificate of origin for this item.

to marioalberto_diaz@hotmail.com

Please e-mail NAFTA certificate of origin for this item.

to marioalberto_diaz@hotmail.com

Buy Fom Amazon Now

Sunday, July 20, 2014

Cheap Frigidaire EA108T 18 In. Sleeve Kit for Through-the-Wall Air

Frigidaire EA108T 18 In. Sleeve Kit for Through-the-Wall Air Conditioners
Customer Ratings: 4 stars
List Price: $89.99
Sale Price: $76.26
Today's Bonus: 15% Off
Buy Now

Be forewarned!!!. Cutting into your wall is not a simple task.

This is NOT a window box it IS a kit to install a window unit through a wall you Will need to create a hole in the wall to put this through.

I've installed kits like this a few times it's a wonderful idea for a pertinent installation of what is normally considered a tacky yet important appliance.

Things you should know before starting this project.

Location of studs. (you will need to put this box in between studs never cut through a stud to install this device. If the stud spacing is to small consult a professional before you attempt an install. or risk you whole wall collapsing with half your roof.) if you must cut through a support you will need a double header and footer around the box.

Location of outlets and wires inside the wall

(You don't want to cut through any wire/pipe in your wall so don't put this OVER a plug as most plugs are dropped in from the attic or above(even if you live in a trailer.)

Ok dangerous part over with. :)

These last few items and hints are just for looks.

1. Get some molding to go around the exposed edge.

2. Have some foam or flashing to put on the outside of the box or risk water inside the wall in storms (basic stuff)

3. Have all the tools you'll need BEFOR you punch that hole in the wall.

4. Have a friend on standby just in case.

Not all kits will have molding or (make pretty) bits a bobs so expect to go to a home supply outlet of some-sort

Installing these isnt all that hard a proficient carpinder can do it in under an hour. But expect to spend most of the day on it. think weekend project take it slow.

Oh ya almost forgot.

run the AC on a flat surface for a while BEFORE you start in on the box and figure out how much of an angle you will need to insure the blasted thing drains OUTSIDE! and i mean let it run for a while it takes upwerds of 5 hrs to get a liquid buildup enough to drip.

Depending on the kit itself and your local humidity you may need to drill in a drain hole near the back of the kit (NOT THE AC) the kit! don't go drilling into your AC

Tools i used.

Tape Measure

Level

Drill

Hammer

nails/screws

Screwdriver bit for drill.

Saws-all

Flashlight

dust mask (drywall dust and junk)

screw driver (for where the drill wont catch)

old sheet/tarp

drill bits. one big one for starting the saws-all

(double header)

one to two 2x4's

Ripsaw (hand saw circular saw .. something to cut the 2x4)

LONG nails and or wood screws (DO NOT USE DRYWALL SCREWS)

Spare Drywall the hole inside will probably be larger than the required size for the box if you have to make a header. (drywall make pretty junk)

To make your life a little more easy use some header hangers (steel strips to hold up the header instead of just nails.

to create the header.

open the wall back untill you can see 3 studs

Cut the center stud out to the apropret gap.

Cut the 2x4's to the length to span the gap between the 2 outer studs you will need 4 of these.

Check your fit

Screw the 2x4's together lengthways to make them 4x4's

Use the hangers or nail in these new headers to the other studs and secure the center stud to the header. the connection point to the outer studs is the important part.

Pick where you want your box cut the outer hole and install.

Patch Drywall make it nice and install molding around the box slide the AC plug it in and enjoy the cold air. :)

Click Here For Most Helpful Customer Reviews >>

Pros:

This is a durable wall sleeve. With a little effort the pictures on the instructions can guide you through a solid installation that will be heavy duty. If you feel comfortable cutting through drywall and adding support beams to studs, you can handle this project in a weekend. Having this wall sleeve makes it easier to insulate around the sides of the A/C unit for an air-tight installation. Hot outside air stays out, cool inside air stays in.

Cons:

The instructions are very poorly written. They offer different details depending on the brand of wall sleeve, but it's not easy to determine the brand of this wall sleeve. I measured the dimensions and made my best guess from there.

Also not clear in the instructions is that you need to REMOVE THE BACK PANEL. You won't know this from the instructions. The back panel is a sheet of aluminum and a grate. The sheet of aluminum should be removed and the grate only placed in the back of the wall sleeve. I installed it with the aluminum in place and the A/C unit will overheat in about 3 minutes, shut off the compressor, and only blow hot air. Then the unit won't blow cold air again until it cools off again. ($65 service call later...) I removed the aluminum and left the grate and the A/C unit has been working fine. The hot air is now free to escape from the back of the wall sleeve.

I'd also like to see a water drip or spigot thread on the back of the wall sleeve. The condensation from the unit will collect in the wall sleeve and drain to the back where there are two holes in the lip of the sleeve. I rigged something to help it drip away from the unit, but it would have been preferrable to have something engineered as a part of the sleeve.

There were a few minor corners bent when my wall sleeve arrived. Better packaging could prevent this.

Best Deals for Frigidaire EA108T 18 In. Sleeve Kit for Through-the-Wall Air

This sheet-metal box is worth about twenty bucks. It doesn't come adequately packed, mine arrived in poor shape. The workmanship is indifferent, the foam baffles were attached incorrectly. The installation manual was written by someone with a strong aversion to communication.

Honest reviews on Frigidaire EA108T 18 In. Sleeve Kit for Through-the-Wall Air

Easy to work with. Figidiare unit fit well into space. Since the unit is made to have a tilt to shed water the trim on the inside wall did not cover properly. Had to build a 1x2 wood frame around the unit then install the trim kit.

Find helpful customer reviews and review ratings for Frigidaire EA108T 18 In. Sleeve Kit for Through-the-Wall Air

Would have been nice if the home store I special ordered the main wall unit from had informed me that I needed to special order this sleeve also. Although Amazon promptly sent me this product asap. Happy isn't the word when I saw the box arrive just 2 days after I ordered it. I was so upset that I had already put a hole in my wall and had to seal it best I could til it arrived. Pretty easy to put in but you do need 2 people unless you want stuff falling.

Buy Fom Amazon Now

Sunday, June 22, 2014

Cheap Hamilton Beach Stainless Steel Ensemble Electric Kettle, 10-Cup

Hamilton Beach 40870 Stainless Steel 10-Cup Electric Kettle
Customer Ratings: 4.5 stars
Buy Now
So after spending a little over a week searching for a suitable kettle I have definitely found the perfect match. I recently received a 6 cup teapot and wanted to keep it in my room along with an electric kettle to replace going into the kitchen and brewing cup after cup of tea.

My criteria

Stainless steel with as little plastic contact as possible.

Hidden heating element.

Simple functions, the less bells and whistles the less to break

Good spout

Inexpensively priced.

What I like about this kettle:

It met all my criteria.

After brewing and discarding 4 kettle fulls there is no discernible aftertaste.

No plastic contact inside, there is a plastic water level but it isn't in direct contact with the largest body of water in the kettle. Also, the tube for the boiling shut off is made from stainless as well, not plastic which is really nice.

Is real metal not just plasticy coated metal imitator I saw on a few of the models.

The inside bottom is a stainless plate with the heating element underneath making clean up easy.

The outside bottom is plastic and gets warm not burning hot so it can be placed onto a surface.

Slides onto the base easily.

Auto shutoff works well.

What worries me: I say worries because it isn't a problem right now but may be a few months down the line.

The lid opens with a button which if it breaks could potentially be a problem, not to fill the kettle as the spout provides adequate room to fill it with, but to clean it.

After two brews i took the little filter out. I am using it only to heat water and only with filtered water so to me it seems unnecessary.

The switch at the bottom, it doesn't seem flimsy per say but it does seem to be a little loose, its not a push button so I worry it may give out.

Duh, or common sense things that people seem to have an issue with:

It gets hot. Yes. It's supposed to. Since the body is stainless steel, which is a good conductor of heat, it will be hot. The handle provides ample room to grab though.

It will be heavy if completely full. Yes, water in larger amounts does get heavy. The kettle itself isn't much heaver than a standard coffee carafe so it should not add much to the overall weight.

It can be a bit loud. Its boiling water, the kettle doesn't have any sound or heat insulation so yes you will be able to hear it. Honestly for me its not really a bother. The kettle sits on its own table next to my desk and I find it kind of soothing. Plus if I am heating water for green tea or white tea I can listen in and shut it off before it comes full boil.

Along those lines, if you leave water in it for some time yes the water will cool. It is not a warmer nor is it a thermos that will keep it to the same temperature all day.

Overall:

I am very satisfied with this product. I have already recommended it to several people and it has been serving me well. Its not a fancy appliance so it does its job and doesn't require a tremendous effort on my part which was exactly what I was looking for.

Click Here For Most Helpful Customer Reviews >>

Researched electric kettles no end without finding a good buy with good performance. Picked this one up at Costco, trusting in the return policy.

I've had no thought of returning it: Heats fast, and the hot water has no taste or smell. Base is light but stays put--it's no effort at all to set it on the base or lift it off.

Cons:

* The metal outside gets hot. Fortunately, you have no reason to touch it. The handle is large and comfortable and your knuckles are protected from accidental brushes, so the heat of the metal is not likely to matter.

* The trigger on the top of the handle opens the lid. A minor annoyance: this usually flings a few droplets of water about. If you use the trigger to open the lid just after boiling, though, those droplets will be very hot. Fortunately, there's no reason to do this unless you're starting another kettle-full just after finishing one. When you're pouring normally, you'll be pouring through the spout and the top needn't be open.

Best Deals for Hamilton Beach Stainless Steel Ensemble Electric Kettle, 10-Cup

I went thru three cordless electronic kettles like this one and was not satisfied, but this one is a keeper, I love it, it boils water fast, keeps it hot/warm for a long time, water doesn't taste funny, no problem with top not opening properly, it's all around the best that I've used, I'll recommend it to everyone~~~

Honest reviews on Hamilton Beach Stainless Steel Ensemble Electric Kettle, 10-Cup

After lots of research, I opted for this one. I drink hot tea every day and wanted an easy and safe way to make hot water, without using the microwave or turning on the stove. This electric kettle did the trick!

PROS:

Kettle can be removed from heating base and carried around.

Wide, sturdy handle for easy carrying and pouring.

Very minimal if any dripping while pouring, really great pouring design.

Heats water very fast.

Automatic shut-off once water reaches a boil, very nice feature.

Very simple switch for on/off and red indicator light tells you it is in the process of heating.

Minimal plastic, mostly stainless steel parts that touch the water.

Metal mesh filter inside pouring spout to catch mineral deposits. I don't really have a need for it, but some might. Can be removed.

Kettle can be placed at any spot on heating base, no need to line anything up.

Heating portions are internal to reduce corrosion and damage.

Boil-dry prevention; it won't allow the unit to turn on the heating element if it detects kettle is empty.

CONS:

Measuring indicator is behind handle, so not the easiest to read while holding.

Product guide states minimum water to boil should be no less than one liter. This is excessive for some of my uses, but not a big deal.

Uses a lot of power fast to quickly heat up that amount of water, actually tripped the breaker!

Lid is spring-loaded so when you push the button, it flings open and if the water is hot, it will fly back on your hand or arm. Though there is no real reason to open the kettle up when it has boiling hot water in it, it could be dangerous especially for kids.

Small opening makes it more difficult to clean, though you aren't to put anything other than water in it so only minimal cleaning is required.

OTHER

Noise: You can hear the kettle heating the water, and it sounds much like a kettle on a stove. There isn't a whistle, but you can hear the water boiling. When it shuts off, there is a 'click' as the switch flips off. I like that, lets me know it is done.

Heavy: Remember, the more water is in it, the heavier it will be. You can't touch anywhere but the handle because it is too hot (and stays hot for awhile). The handle is sturdy and thick enough to pick up the kettle, but if you have weak hand/wrists and it is full, BE CAREFUL. Use a potholder if you need to touch the other side for balance.

Overall: I'm happy with my purchase. You can easily spend a lot of money on an electric tea kettle, but I don't see the need to, this one from Hamilton Beach does a fine job.

Find helpful customer reviews and review ratings for Hamilton Beach Stainless Steel Ensemble Electric Kettle, 10-Cup

I bought one from Costco. It works perfect. There is no rubber smell. I have a very sensitive nose when drinking my earl grey tea. Performance so far is just as good as the Cuisine Art that we keep upstairs which tends to break down after a year of use. We will see which one will lasts longer without breaking down.

Buy Fom Amazon Now

Friday, April 18, 2014

Cheap Sta-Rite Max-E-Therm Thermal Regulator 38000-0007s

Sta-Rite Max-E-Therm Thermal Regulator 38000-0007s
Customer Ratings: 5 stars
Buy Now
I downloaded the trouble shooting guide from Sta-Rite and went through the diagnostics for my problem. A bad sensor was indicated. Called Sta-Rite to confirm. The tech said it was actually the thermal regulator that had gone bad.

I placed the order on July 3rd. It shipped the same day and showed a delivery date of July 11 to July 26th. Imagine my surprise when the mail lady delivered it on July 7th.

It took about ten minutes to swap out the regulator and I now have a hot spa again.

Thank you Discount Pool Mart for the excellent service!

Click Here For Most Helpful Customer Reviews >>

Wednesday, February 12, 2014

Review of 240V GARAGE HEATER (Fahrenheat/Marley FUH54)

240V GARAGE HEATER
Customer Ratings: 4.5 stars
Buy Now
This unit is exactly what I needed for keeping a garage above freezing, and for warming it up occasionally for work. It is adequate for a well-insulated double garage. The heater, while very basic in design, is of good quality. (Made in the USA!) I emailed a question about adding a remote thermostat to the manufacturer and received a prompt and helpful reply. It pays to shop around online, because the same unit sells for a range of prices under slightly different model numbers--check the specs. The local big-box home improvement stores have nothing comparable.

Click Here For Most Helpful Customer Reviews >>

I've had this heater for over 2 years now and have had no problems with it whatsoever. This is very well built product. All the connections are very solid and secure, using heavy duty materials. The heat settings are adjustable via easy to access jumpers. I have it on the factory standard setting and it heats my 20' x 20' garage in less than 10 minutes. Highly endorsed by me.

Best Deals for 240V GARAGE HEATER (Fahrenheat/Marley FUH54)

Have been using this heater for a month or so. It meets all our needs. No odor or excessive heat. Very quiet, and looks good. We are using this in an insulated sun room... about 300 sq ft., the room is still very pleasant even when the temps were below zero last week.

Honest reviews on 240V GARAGE HEATER (Fahrenheat/Marley FUH54)

Electric Garage Heater

Step 1: I wanted to work comfortably in an attached 22 x 22 (9 foot high drywalled ceiling) garage in the winter. Figuring I'd need lots of heat, I bought a portable 40,000 btu propane heater. It exhausts lots of carbon monoxide, so you have to partially open a door or window to the outside to let [cold] fresh air in -which seriously lowers heater efficiency. The heater warmed the garage, but the approach wasn't satisfactory -i.e., the fumes were so bad, I stopped using it. It was also very loud, like the hissing of escaping air from a large air boat; plus, when the propane tank ran out, the heater stopped; each time you needed heat, you had to drag it out, connect it to the tank, leave plenty of floor space around this self-contained-blowtorch; put it all away when you were done; and of course find a place to store it. Also, there was no thermostat. All in all, a royal pain in the keister. (Google search on: "propane heater carbon monoxide" to read about the serious risk of carbon monoxide from propane heaters.)

Step 2: I bought one of these electric heaters. It has only half the btu's of the propane unit, but there is no need to open a window or door for ventilation. It also has a thermostat, so you can set it (to a number, not a temperature), and come back 30 minutes later and be in relative comfort. On days in the low 30s, it will keep the garage in the 60s, which is fine for working.. (My attached garage ceiling and 2 walls are insulated.) My heater is mounted high up on a wall, but it can also be mounted to hang from the ceiling, as long as the clearances laid out in the instructions, are followed. In any case, once mounted, it is out of the way, and always ready. There's nothing to haul out or set up when you need heat -just turn it on. When done, just turn it off. This heater needs a dedicated 30-amp 220-volt circuit. You wouldn't want to use this every day, due to electricity costs, but for occasional use, it is perfect.

My advice is to skip step 1.

Note: As of this writing, Amazon sells this heater under several names:

Fahrenheat Ceiling-Mount Automatic 5000 Watt Electric Heater, Model# FUH5-4

Fahrenheat/Marley FUH54 Suspended Electric Heater

Dayton G73 Electric Garage Heater

Multi-Watt Horizontal Downflow Unit Heater With Thermostat 208/240v

These are all the same heater; it is manufactured by Marley Engineered Products of Bennettsville, South Carolina.

Find helpful customer reviews and review ratings for 240V GARAGE HEATER (Fahrenheat/Marley FUH54)

My garage is about 7' tall, 20' long and 10' wide, so not a big garage by any means, but enough to do work in. I set out to find the most powerful heater I could reasonably install, for a reasonable amount of money. So far this heater heats up the garage in a few minutes which is perfect, and judging by other comments here it has no problem with larger garages either. I have yet to do a proper degree/minute study but I will save that for when it is really cold outside.

The manual that comes with the unit has some restrictions on where you can mount it, such as spacing away from walls and ceiling so make sure you have a fair amount of room, or a cleared away area to place it.

The only gripe with this heater is that it doesn't come with any wiring hardware at all. I can understand the plug doesn't come with it, but it would be nice if a pigtail came out of the box that you could splice your own plug onto. I can understand why they don't, since they can't assume their pigtail would be long enough for your installation.

I ended up buying perhaps $60 extra stuff to wire this heater into my garage, which includes putting a receptacle on the wall and a plug onto the end of the wire I ran out of the heater unit. It's something to keep in mind if you have a budget. On the plus side, I now have a 240V outlet in my garage that other things can be plugged into in the future.

Buy Fom Amazon Now

Friday, January 3, 2014

Buy LG Heat / Cool Window Air Conditioner with Remote - 12000 BTU

LG Heat / Cool Window Air Conditioner with Remote - 12000 BTU
Customer Ratings: 5 stars
Buy Now
I had a circa 1970's AC in window/semi built in, it suddenly died. I figured for the price I would give this a try. I love it. Cools the entire upstairs (about your avg 2 bedroom apt) on its own. Recommend!

Click Here For Most Helpful Customer Reviews >>

Friday, December 20, 2013

Frigidaire FRA086AT7 8,000 BTU Window-Mounted Compact Air Reviews

Frigidaire FRA086AT7 8,000 BTU Window-Mounted Compact Air Conditioner with Temperature Sensing Remote
Customer Ratings: 4 stars
List Price: $249.99
Sale Price: $209.98
Today's Bonus: 16% Off
Buy Now

I am reviewing the Frigidaire FRA086AT7 8,000 BTU Mini Compact Window Air Conditioner. I am giving this AC a good review, but will mention a few things I didn't like about it. All of the complaints are minor, except for one, which was a problem for me, but might not be for you. I'll start with the background information, then list the features, and then list the good points and bad points.

Background Information:

This is a great AC with many features, good looks, digital display, remote control, and it cools the room very well. I'm using it installed in a window for my bedroom. Mine is 8,000 BTUs, but Frigidaire has similar models with different BTUs. It only comes in White. Even though it is described as "Mini Compact," it appears very sturdy and well-made and isn't really that small. Installation was a breeze because the unit weighs only about 50 lbs. It comes with the AC unit, a window installation kit, a nice manual, foam that you can put between the windows, and self-adhesive weatherstripping to cover any openings. All hardware is included. You just need a Phillips screwdriver to install it and a drill if you want to screw the top of the unit into your window. It is Energy-Star Compliant. The warranty is ONE YEAR Full Coverage and FIVE YEARS for the AC compressor.

Features:

* It has a green LED digital display with membrane button controls. You press buttons to control the unit. There are no knobs. Membrane means that all the buttons are covered by hard plastic and you press the label on the plastic that covers the buttons underneath. Each button press emits a beep, but if you hold the temperature/timer button down, it scrolls faster and only beeps once.

* It has buttons for On-Off, Mode, Fan Speed, Temp/Timer Up, Temp/Timer Down, Timer, Sleep, Filter Reset, and Clean Air.

* The Green Digital display shows the Temperature and Timer. Normally, when the unit is on Cool or Econ, it shows the temperature you have set, like a thermostat. However, when the fan only is on, it shows the actual temperature in the room. When you are setting the Timer, it displays the count-down timer.

* It has green LEDs for the 3 modes, the 4 fan speeds, whether the digital display is showing Fahrenheit, Centigrade, or Timer, Timer On, Sleep On, Filter Reset On, Clean Air On, and Remote Sensing On.

* You turn the unit on and off and it remembers your last settings. You press Mode to select from Cool, Econ, or Fan Only. Econ is Economy Mode that cycles the AC compressor on and off, once it reaches the set temperature, to conserve energy.

* Fan Speeds are Low, Med, High, so you have 3 speeds for both the AC and fan. The AC also has Auto Fan, which regulates the fan speed automatically for you. It comes on full blast when you first turn it on, then gradually lowers the fan speed as it reaches your desired temperature.

* The Up and Down buttons are used to set the temperature on the digital display. You can set it from 60 degrees to 90 degrees and display it as either Fahrenheit or Centigrade. These buttons are also used to set the Timer.

* The Timer button allows you to program the unit to either turn on or shut off one time over a 24 hour period.

* The Sleep button raises the temperature you have set by 2 degrees, one half hour after you activate it, and then by another 2 degrees, half an hour later. Then it keeps this temperature for the next 7 hours. It sounds more confusing than it is. Basically, you can activate the Sleep feature when you go to sleep. It assumes an 8-hour sleep cycle. So if you set the temperature for 72 degrees, then an hour after you go to sleep, it will be set for 76 degrees for the next 7 hours, and then go back to 72. The theory is that it you can fall asleep with the temperature you have set, and it can gradually get a bit warmer during the night, without it disturbing you, plus, it will prevent you from becoming too cold.

* Filter Reset has an LED that lights after every 250 hours of use. When it lights, it reminds you to clean the filter. After you clean it, you press the button to turn off the LED and reset it. Then it will remind you after the next 250 hours of use.

* Clean Air is a built-in Air Ionizer and Purifier. If you turn it on, it will automatically remove dust and impurities from the air while either the AC or fan is running.

* It has two separate air vent openings at the top that can be controlled independently.

* The enclosed remote (2 AAA batteries included) has an unlit LCD Display that shows the actual temperature at the remote, presumably that is where you are sitting. You can control everything from the remote, except the Filter Reset and the Clean Air Filter. A red LED blinks when you press a button. You can also turn Remote Sensing on and off from the remote. When it's on, a corresponding LED blinks on the AC unit to show it's activated. Normally, the unit controls the temperature, based on what the temperature is at the AC unit itself. When Remote Sensing is on, the unit then controls the temperature based on what the temperature is where the remote is located.

Good Points:

* Cools fast and extremely well.

* Very quiet.

* 6 foot long, 3-prong power cord, so you probably won't need an extension cord.

* Remembers your last settings, even if the unit is shut down due to a power failure.

* Auto Fan speed is very nice and is similar to digital climate control in a car, plus you have the other 3 manual fan speeds.

* Sleep feature is a nice touch to prevent you from getting too cold while sleeping.

* Reminds you when to clean the filter.

* Air ionizer is a good idea and makes you wonder, why didn't someone think of this before.

* Very attractive looking unit.

* Remote control adds a level of convenience, but it is the temperature display right on the remote that is an added bonus. Plus, having the unit control the temperature right where you are with the remote is very nice.

* Small and easy-to-remove air filter. It slides out from the top.

* Very energy efficient and the increase in my electric bill is much less than with other AC units I have owned.

Bad Points:

* Can't speak French. (Honeymooners' reference.) ;)

* It's slightly annoying that if the AC is on, you have to cycle it to Fan to display the actual temperature in the room, and then set it back to AC. There should have been a separate toggle button that would allow you to view either the temperature you set or the room temperature right on the AC unit itself. There is a temperature display on the remote, but when I am closer to the unit than the remote, I often use the unit to see what the temperature in the room is.

* The vent is always closed. It's the first AC unit that I've owned that strangely doesn't have a Vent Open and Vent Closed control. A number of my other ACs have Vent Open, Vent Closed, and Exhaust controls. It's not that big a deal, but with all of its other features, I wonder why this very basic control was left out.

* When you press a button on the unit, the beeps are very loud.

* For many people, the Timer feature will be a great thing, but I have been spoiled. The Frigidaire unit I am reviewing is replacing a Carrier AC that lasted me 21 years! The Carrier worked perfectly from 1988 until the end of summer 2009 and then it broke. I replaced it with this unit.

The Carrier was ahead of its time and it also had a timer. It was an analog timer, but it allowed you to turn the unit on or off, at hour intervals, as many times as you wanted over a 24 hour period. That might sound like overkill, but I would use it to turn the AC on one hour before I came home from work and then shut off 2 hours later, just in case there was some emergency and I didn't make it home right after work. Normally, I would come home, the room was nice and cool, and then I would turn the timer off. But just in case, I had the peace of mind knowing the AC would shut off in 2 hours, instead of staying on all night, if I didn't make it home.

You can't do that with the Frigidaire. You simply set a countdown timer and when it reaches zero, the unit will turn on, if it is off, or turn off, if it is on. Also, you have to set the timer every time you use it. With the Carrier, you could set the programmed times once, and then just turn the timer on when you wanted to activate it. Again, this is not that big of a deal and many people may not even use the Timer.

* The major drawback for me and the only thing that prevented me from giving the unit a 5-Star Rating was that the air-directional controls are absolutely horrible. I'm talking about the opening at the top of the unit where the air blows out from. I honestly can't understand how such a nice unit could be so deficient in this regard. They really missed the boat on this one.

All the ACs I've had over the years had very similar air-direction controls and they all worked great. Basically, they all had little handles, where you could rotate the vent flaps either left or right. Then there were also up/down flaps, where you could direct the air to blow upward. The bottom line is that you could control the direction of the air flow beautifully.

With the Frigidaire, they advertise it as 8-way air control. If you look at the picture you can see that you can control the left and right vents separately. So the left vent can be controlled left-right-up-down and that's 4 ways. Then the same for the right vent, makes 8 ways. Well, it sounds good on paper, but the vents simply do a bad job of controlling the direction of the air flow.

Each vent has a knob that you rotate to presumably control the left-right air flow. Then, you can also click each vent either up or down. Well, if you look at the picture you can see that a plastic rod with small plastic circles on it controls the left-right air flow. The problem is that these plastic circles don't go all the way to the top of the unit, so air ALWAYS blows straight ahead, no matter how you adjust the controls. If you adjust them full left and full right, some air will be directed left and right, but the majority of air will still blow straight ahead. To add insult to injury, the up/down controls are totally useless. They don't swivel, allowing you to position them at numerous up/down positions. There are only 2 positions. Straight ahead or you can click them up one notch, which raises them up about a quarter of an inch. They are useless because they only vary the up/down air flow by about 6 inches.

I made a big deal about this because I'm using it as a bedroom AC and it affects me when I'm sleeping. Truth be told, in most circumstances, the air-direction controls of an AC are not that big of a deal. If it's not used in a bedroom, or if it's installed high in a wall or even in a window that's not next to a bed, this should not create a problem for you.

However, as fate would have it, the unit is installed in a window located to the side of my bed. That's where the Carrier AC was installed and when I adjusted its vents, the air would blow upward and to the sides, so it NEVER blew directly on me while I was sleeping. With the Frigidaire unit, no matter what I try, the AC always blows directly on me while I am sleeping and I don't like that. So the bottom line is that this may not apply to you, but it's something you should be aware of. It's really quite annoying that I can't adjust this unit so it doesn't blow on me while I'm sleeping.

Conclusion:

This is a great unit and I highly recommend it, but with one reservation. You virtually cannot control the direction of air flow and it always blows straight ahead. Depending on your circumstances, this might not matter. However, if the unit will be installed in a window next to your bed or next to where you will be sitting, be aware that it will blow directly on you.

Click Here For Most Helpful Customer Reviews >>

The best thing about this little AC unit is the "remote sensing" feature. It has a thermometer on the remote control and can use that as the input for the thermostat, set the remote in the middle of the room and it will keep it at an even temperature. It also has an "econo mode" setting and a "clean air" ionic air filter. It is small, relatively quiet, and the 8000 BTU's do a fantastic job keeping the place cool (it hardly ever runs in econo mode but still keeps it cold). This unit was only $10 more than the equivalent 6000 BTU Frigidaire unit.

Best Deals for Frigidaire FRA086AT7 8,000 BTU Window-Mounted Compact Air

Ok, I did my research before I bought this unit. It seems like the most bang for your buck. Amazon.com was VERY fast shipping this to me! I was shocked how fast.

The manufacturer claims that it uses only $59 of electricity a YEAR on average. We'll see. I haven't gotten the bill yet.

The unit has an ionizer and here's what I found about them:

"An air ionizer is a device that is intended to purify the air. As its name implies, instead of using fans and filters, an air ionizer creates ions which remove microscopic particles from the air. Rooms are healthier for those suffering from asthma, allergies, impaired immunity, or respiratory ailments, without as many allergens circulating in the lungs. Dust and mold collects inside heating and air conditioning ducts. Higher humidity inside allows bacteria to thrive. An air ionizer addresses these home and office sources of pollution and odor. The ozone that is created when negative ions are generated battles pollution by breaking it down into smaller, harmless components. Published research shows that high levels of negative ions are a useful treatment for Seasonal Affective Disorder."

Then again, a new study conducted by Consumer Reports indicates that ionizers also create ozone that isn't good for you. So who knows? I've been using it.

Pros

* Cools great! Cooled my whole apartment!

* Remote control

* Can use the remote for sensing the temperature instead (nice)

* Easy to install (took me an hour)

* Has an ionizer on it

* Lots of features

* I personally love the sound of the fan. It sounds a lot like a really nice box fan. I sleep like a baby and it downs out the noise from outside since I'm off a busy street. (people pay a lot of money for white noise machines!)

Cons (not enough to deduct a star though)

* No option to use vent to bring in outside air (on the bright side, bugs can't get in through the unit)

* On energy saver mode, it only checks the temperature every 10 minutes (it got up to 80 degrees in here in-between 10 minute checks)

* You'll need weather sealing tape for the side panels (so little bugs don't come in the sides and cold air gets out)

* Smelled a little metallic at first (I think it's the lubrication inside the unit)

Please note: You will probably want to weatherize the room (or your place) the unit is in. This is very easy to do (I put "high density foam tape" around the doors and "clear weather sealing tape" where air could come in around the unit) and makes a huge difference. If hot air is coming in and cold air is getting out, then no normal air conditioner is going to seem good enough. Plus, you lose a lot of money on wasted electricity. That's pretty common sense. If I can do it, anyone can.

CHECK WITH YOUR ELECTRIC COMPANY! I was eligible for a $30 dollar rebate on my electric bill for buying this "green" unit. Every little bit helps!

I found all the specifications before I bought the unit and thought I would share:

Plug Type (NEMA) LCDI 5-15P (Normal Plug)

18-1/2" W x 13-2/5" H x 18-1/8" D

Product Code: FRA086AT7

Product Type: Compact

Power Type: Electric

Installation Type: Window Mounted

UPC Code: 0-12505-27363-6

Color: White

Exterior Dimensions

Height: 13-2/5"

Width: 18-1/2"

Cabinet Depth (with Front): 15-1/2"

Performance

BTU (Cool): 8,000

Dehumidification (Pints/Hour): 1.7

Cool Area (Sq. Ft.): 350

Energy Efficiency Ratio: 10.8

Performance Certification: AHAM

Electrical Specifications

Voltage Rating: 115V, 60Hz

Amps (Cool): 7.0

Watts (Cool): 740

Horsepower (Cool): 0.99

Power Cord Length: 6' (6-1/2')

Plug Type: LCDI 5-15P

Controls

Console Location: Center

Sleep Mode: Yes

AC Specifications

Fan Speeds (Cool): 3

Fan Speed (Fan): 3

Low Voltage Start-Up: Yes

Auto Cool Function: Yes

Energy Saver: Yes

Filter Check: Yes

Clean Air Ionizer: Yes

Remote Control: Full Function / Remote Thermostat

Air CFM (High): 217

Air CFM (Med): 176

Air CFM (Low): 147

Motor RPM (High): 1,600

Motor RPM (Med): 1,500

Motor RPM (Low): 1,400

Air Direction Control: 8-Way

Noise Level dB (High): 60.9

Noise Level dB (Med): 56.6

Noise Level dB (Low): 52.5

Vents Closed: Yes

Filter Access: Tilt-Out

Depth: 18-1/8"

Cabinet Louvers: Yes

Window Mounting Kit: Yes

General Specifications

Filter Type: Anti-Bacterial Mesh

Warranty: 1 Year Full/5 Year Sealed System

Refrigerant: R410a

Window Height (Min.): 14"

Window Width Min. (Max.): 23" 36"

Product Weight (lbs): 46

Shipping Weight (lbs): 55

Exterior Specifications

Dealer Front Material: HIPS

Certifications & Approvals

ENERGY STAR® Certified: Yes

Safety Certification: UL/CUL (SA11087)

You can download all the guides that come with the unit:

Owner's Guide:

manuals.frigidaire.com/prodinfo_pdf/Edison/2020211A1112en.pdf

Installation Instructions:

manuals.frigidaire.com/prodinfo_pdf/Edison/2020211A1131en.pdf

Product Specifications:

manuals.frigidaire.com/prodinfo_pdf/Edison/FRA086AT7_0411.pdf

Energy Guide:

manuals.frigidaire.com/prodinfo_pdf/energyguides/RAC/FRA086AT_EG.PDF

Wiring Diagram:

manuals.frigidaire.com/prodinfo_pdf/Edison/202021190024.pdf

I hope that helps others as much as it did me.

Honest reviews on Frigidaire FRA086AT7 8,000 BTU Window-Mounted Compact Air

I don't have a lot of experience with window a/c units, but this little guy seems to do alright. I moved to Brooklyn recently in the midst of mid-90s heat, into an apt with 0 a/c. Units were sold out all over town (except in overpriced specialty stores) so I had this unit rush delivered. The quality seems pretty good, given the relative low cost. I have this installed in my bedroom and it keeps the entire room chilly (68 F) on the lowest fan setting. Another plus is that I've not been bothered by any water dripping inside or out of the unit, which has been a problem of mine in other units.

The one negative I have is the loudness of the lowest setting. I wish there was another setting lower that was a bit quieter.

Find helpful customer reviews and review ratings for Frigidaire FRA086AT7 8,000 BTU Window-Mounted Compact Air

4 stars instead of 5 due to noise not terrible, but not the best available. Just purchased this unit from Lowes (slightly newer model remote control has been changed to the thin "credit card" sized remote control). About the same noise level as my 2-year old Kenmore 8000 Btu; not as quiet as my 20-year old Kenmore 8000 Btu (I have all 3 units installed and running in various rooms, so can compare). This unit is slightly cooler than the 2-year old unit, about the same as the 20-year old unit. Adjusting the directional vents on this unit is better than the older Kenmore, but still not great (no A/C I've seen has had good directional control). One annoying item for a bedroom installation: there is a really loud "beep" whenever you adjust anything. Would be really annoying to a partner if you adjusted the unit in the middle of the night.

Buy Fom Amazon Now