Showing posts with label heater gas. Show all posts
Showing posts with label heater gas. Show all posts

Thursday, January 22, 2015

Discount Guide Gear 1500W Infrared Space Heater

Guide Gear 1500W Infrared Space Heater
Customer Ratings: 5 stars
List Price: $250.00
Sale Price: $179.99
Today's Bonus: 28% Off
Buy Now

put out lost of heat i meat heat 1,500 sq/ft. i got 3 of these to heat the hold home. it cost less to heat my moble home 16x80 with these 3 heater.than to turn on the big heater in the wall.

Click Here For Most Helpful Customer Reviews >>

This is a great product and I would recommend for anyone looking to heat a space locally rather than dialing up the theromstat and heating the whole house. It is great during the winter months and I am sure we will see a difference in our heating costs when we use it!

Buy Fom Amazon Now

Tuesday, January 13, 2015

Hydrofarm CK64050 Germination Station with Heat Mat Reviews

Hydrofarm CK64050 Germination Station with Heat Mat
Customer Ratings: 4.5 stars
List Price: $34.99
Sale Price: $31.39
Today's Bonus: 10% Off
Buy Now

I used two of these this last spring, and I was extremely happy. My previous year, I used another system for heat, and I had problems with overheating and heat retention.

For those who reported problems with seedlings growing too fast or falling over and dying, I would like to know the larger picture--did you address the potential problem of damping off? And did you provide a grow light at the appropriate height?

I researched several options to address damping off, since that was a huge problem for me last year. I microwaved all of my moistened starting mix, roughly 10 minutes per 2 quarts of moistened soil. If you bake this in an oven, I recommend 30 minutes at roughly 350 degrees. I also bleached and washed any pots that had been previously used. After the seedlings emerged, I sprinkled cinnamon on the surface, and I had no problems with damping off. I was particularly concerned about damping off since there was quite a bit of condensation inside the domes. However, I cleared the condensation at least twice daily, and I did not lose any seedlings out of roughly 150 starts. This was on top of 100% germination, so I gave away lots of starts this year!

I used these for squash, peppers, tomatoes, herbs, eggplants, some flowers, soybeans, shiso, chard, and cucumbers. After transplanting starts into larger pots, I continued to use the heating pad and base for the larger pots. I also had simple fluorescent grow lights that I maintained at proper heights for the plants. You should keep the lights within 2" of the plants, or the plants will be reaching too far for light and will become spindly--a particular problem for tomatoes. For these units, you really need a 4-bulb grow light or the starts on the edges will not receive sufficient light. I had to search around but found a 4-bulb, 4' shop light for a grow light, and I was thrilled with the coverage over these units. No need to buy "grow lights", just alternate cool and warm wavelength fluorescent bulbs.

Because of an unusually cold spring and early summer, I kept my peppers and eggplants inside until mid-June, and a few of them were already blooming and looking extremely healthy. The tallest were roughly 8" tall. The heating pads were wonderful for the peppers and eggplants in particular, but I know the squash also germinated much better because of the heat.

I strongly recommend not using the seed starting mix that is designed for peat pots, unless you use the peat pots in your units. If you use the peat pot starting mix, it will fall all over the place and away from the roots when you pull out your seedlings to transplant them.

Sure, you can make something similar to this with off-the-shelving parts, but I am not commenting on alternatives, just commenting on performance of this system. I highly recommend it but only if you provide appropriate grow lights and address potential damping off.

Click Here For Most Helpful Customer Reviews >>

Although it may seem a little over priced, it is the convenience that you pay for. The product is exactly what it shows, a plastic tub with a plastic top, plastic dirt moldings, and a heating pad. If you think about the price of the heating pad that fits perfectly with the container, it is well worth the while.

In addition, I have had success with this product. I grow indoor coffee, and I have received a much quicker germination rate; as well as being healthier. Furthermore, it gives you great control of not only temperature, but humidity. In my opinion, that is a major plus.

Best Deals for Hydrofarm CK64050 Germination Station with Heat Mat

First, when the package says it comes with an insert, that means the 72-cell tray you put potting mix in, not the potting mix itself.

Second, you're supposed to take the clear plastic lid off once your plants germinate. That's why there's no room for the seedlings to grow under it. (Though the packaging does feature a tray full of robust seedlings under the lid, which may confuse people who can't be troubled to read the instructions.)

With that out of the way, this product does exactly what it promises. The heat mat warms the tray a bit, but not too much. The tray's cells are the right size for tiny seedlings, the kind that need a heat pad, and soft enough that you can pop the seedlings out without much effort.

The whole contraption fits perfectly under the Hydrofarm JSV2 2-Foot Jump Start T5 Grow Light System. If you buy a Hydrofarm TM01715D 7-Day Digital Program Timer, you can plug both the light and the heat mat into it to have the 14-hour light-warm/dark-cool cycle most seedlings enjoy. These three products together make a great indoor seed starting set-up.

For a backyard farmer or gardener who needs to start a bunch of seeds at once, this will do the job.

Honest reviews on Hydrofarm CK64050 Germination Station with Heat Mat

This item is essentially a plastic base and clear top (very flimsy) with a heating pad that the base sits on. It's adequate for starting plants from seed, but my main complaint is that for what you get, it's way too expensive. I believe a fair price for this item would be around $20, NOT $40. If you do decide to purchase a germination station like this one, buy the one with the taller top it doesn't take long before the new plants start running into the 2" tall lid.

Find helpful customer reviews and review ratings for Hydrofarm CK64050 Germination Station with Heat Mat

I bought this kit because of the price was about $40 and there was no shipping charge. Now I am just using the heat mat and tray to coax fig cuttings to root. Late winter I will reinsert the planting cell tray and the clear lid to germinate other small cuttings and garden vegetables. The station and mat are standard size and weight. The mat provides good even heat and seems tough enough to last a long time.

Buy Fom Amazon Now

Friday, December 12, 2014

Discount MAX Fan Heater

MAX Fan Heater - Red
Customer Ratings: 3 stars
Buy Now
Swizz Style M-006 Max Fan Heater, White

It's absolutely great looking: hip, sharp and whimsical. Everyone in my architecture firm wanted one when it was delivered. But I bought it for a room in my home with a fireplace but without central heat. Sadly, it's much, much less powerful than the much less attractive ceramic heater I bought at Costco for 1/3 the price. It also off-gases really toxic-smelling fumes for several hours after you turn it on, so be prepared to put in a very well-ventilated place to begin with. (I had to plug it in outdoors.)

It still deserves rave reviews for its looks, but I'm swapping out the ugly black electric cord it came with for a white one...

Click Here For Most Helpful Customer Reviews >>

Looks good from 3 feet away. As you move closer, the metal-colored plastic detracts from the appearance.

Bizarre controls. I can't believe I needed to read the instructions for a device this basic.

While the heating element turns on consistently, the fan is less reliable. I can tell when this happens by the terrible smell it emits, at which point I run over and unplug it.

Best Deals for MAX Fan Heater

I've had one of these for several years and I've just ordered a second one for another room in our house. We live in northern California and use ours to keep our daughter's room a few degrees warmer than the rest of the house at night (71 or 72 instead of the 66 degrees we set our central heat for). Positives: cute, stays cool to the touch, doesn't heat up the cord or make worrying electrical noises or seem cheap and scary like other space heaters. Quiet fan operation doesn't disturb her if I turn it on or off at night, and the controls seem pretty simple to me. Negatives: I agree with the other reviewers that this is never going to help you heat an unheated workshop or in a very cold climate. It works great for a bathroom, bedroom or an office to supplement central heat when you don't need to keep the whole house as warm. For us the only real negative is that the thermostat could be a little more reliable mostly it seems to approximately work, but sometimes I'll notice that the heater runs the room up into the upper 70s and it doesn't shut off, even though when you test the thermostat setting by hand it should have. We use a Belkin outlet timer cutoff in the winter to plug this into so that it doesn't run more than 3 hrs at night and we don't have to remember to check.

Honest reviews on MAX Fan Heater

Paid a premium for its looks but as most things pretty, this one fails to deliver ! Construction quality looked cheap for the price. Even with the heat control set to the highest setting and the thermostat control set to Max , the heater barely moved the temperature in our living room (about 150 sqft) with ambient temperatures of around 60* F.

This thing could rock in Texas or Florida but would be little more than an ornamental decoration in most of the Mid-West.

Needless to say this thing is on its way back to the store !

Find helpful customer reviews and review ratings for MAX Fan Heater

This unit has a cool design but does not put out any heat. Even on the high heat setting the heat this unit puts out feels like tepid water. I will be returning this for a refund.

Buy Fom Amazon Now

Thursday, December 4, 2014

Review of MSZ-GE15NA

MSZ-GE15NA
Customer Ratings: 5 stars
Buy Now
We purchased a ductless heat pump (Mitsubishi MSZ-D30NA) two years ago. It's cut our winter electric bill in half. We had no air conditioning before we installed this unit so our summer electric bills are a little higher depending on how hot our summers are here in the Northwest. This unit has performed flawlessly with no maintenance except for vacuuming the filters. It's so quite that we barely hear the inside unit and the outside unit is also very quite. It also has a very handy remote control. We have a 2000 sq ft one level home and this unit, with just one evaporator mounted in the family room, heats and cools the entire home except for the master bath. It's amazing the amount of heat that it puts out even in the cold winter. This unit is bigger than was recomended by the contractor. My thought was to have a higher output unit that would not have to work as hard. I could of had a smaller less expensive unit. The inside mounted evaporator is fairly large hanging on the wall near the ceiling but after a while we don't even notice it. When visitors come over they don't even notice it unless we point it out. With this 30,600 btu unit you could run 3 or 4 more inside units, say to upstairs bedrooms. This is a much less expensive way to have heat and air conditioning installed in an exesisting home that doesn't have duct work. Some public unilities offer rebates for ductless pumps.

Click Here For Most Helpful Customer Reviews >>

Sunday, November 9, 2014

Discount Great Northern Popcorn 6005 Lincoln Antique Popcorn Cart

Great Northern Popcorn Black Lincoln Antique Style Popcorn Popper Machine Complete with Cart and 8-Ounce Kettle
Customer Ratings: 4.5 stars
List Price: $599.95
Sale Price: $269.99
Today's Bonus: 55% Off
Buy Now

We did a LOT of research to find a unit for our web and mobile development studio (eight bit studios) :) The Great Northern Popcorn makers stood out and this unit ended up being the perfect pick. The size is perfect for our team of 10-12 that our in the office. It's big enough to make things feel official and use official popcorn scoop shovels, but not so big that it's taking up a whole room. It took two of us all but 10 minutes to assemble. The separate switches for the light heater, kettle arm rotator, and kettle heating element are great. It's completely silent --and fairly quiet even when popcorn is popping out of the kettle. We have found it easy to clean. The stand with the storage door is tall enough to fit a standing Flavacol carton and deep enough to also include a gallon of coconut oil. This unit is ALL GLASS, including the doors! This was a surprise because we were looking at a more expensive unit from GNP that had etched glass and a smaller form factor, but was advertised as all glass including the doors --apparently in other units the doors will be a plexiglass and could warp from the heat? Overall we are loving it. We're still trying to get just the right combination of preheating the kettle, vs the oil and kettle or combining it all at once so that the popcorn isn't too chewy. So far we're getting really close by preheating the kettle for 3 min, then adding the oil with flavacol mixed in until it starts to steam, and then adding in the kernels. A quick tip for you rookies. Get the popcorn/peanut salt!!! The corn has a bit of salt with the flavacol, but the movie theater quality gets in there with that fine salt! So in less words, this popcorn popper will not disappoint!! If you want more reviews, check out the equivalent popper in red.

Click Here For Most Helpful Customer Reviews >>

Black "Lincoln" 8 Ounce Antique Popcorn Machine and Cart was recieved damaged...decided to just live with it because it's too hard to try and repack for return. The unit is not as big as i would have expected and not as well crafted as i would have like...however, it does make really great popcorn!! I put it in our media room and it really makes it smell like a real theater when we are watchinmg movies and sporting events!

Best Deals for Great Northern Popcorn 6005 Lincoln Antique Popcorn Cart

This popcorn popper is a great addition to my friends movie theater room. I think this is the best house warming gift we could have gotten.

Honest reviews on Great Northern Popcorn 6005 Lincoln Antique Popcorn Cart

This popper makes great popcorn. My biggest disappointment is that both of the air-less, solid rubber tires have split twice now, within the 4 years of owning this popper. It's never been outside, nor does it set in the sun. Having trouble getting contact information to replace the tires/wheels again since I was told the warranty was 5 years. Anyone have any suggestions, please?????????????

Find helpful customer reviews and review ratings for Great Northern Popcorn 6005 Lincoln Antique Popcorn Cart

I bought this for my husband's birthday this year, and he is in love with this machine!!! I've been very happy with it since getting it. It looks nice and pops great popcorn!! I went ahead and bought the Great Northern Popcorn packets that are pre-measured. It works great and I don't have to measure anything or worry about having popcorn salt or the right oil, etc... I would buy this machine again if I had a need for another one!! :-)

Buy Fom Amazon Now

Sunday, October 26, 2014

Sunbeam Compact Heater Fan Reviews

Sunbeam Compact Heater Fan
Customer Ratings: 5 stars
Buy Now
we bought two of these heaters a long time ago, one for our garage and one to warm our chilly bedroom with a bad radiator.

they worked great, nice and warm, (the way we like it) then our one in the garage stopped working and burnt out in the flood (hurricane sandy when we had no power) we found that out when it came back on, so we tossed out the old one and used the good one (which was in the bedroom) that one worked great until my husband was in the garage and my son came to give him some papers. he accidentally kicked the holmes heater off the stool and onto the concrete floor. he tried to put it back on heat level one, but what happens?...... It starts making a GRINDING noise and emitting a horrible burning smell. so he unplugged it for ten minutes and let my 10 yr old open it up and saw that the fan belt somewhat damaged and the blade just wobbling loose inside witch caused the fan not to function right and that caused the heating coil to overheat.

I hope you find my review helpful! I still do give this heater five stars cause it's not the heater's fault, we broke it. BUT if you want to try what my son did about fixing it, UNPLUG THE UNIT FIRST!!! For at least 10 minutes.

thanks

newmom

Click Here For Most Helpful Customer Reviews >>

Tuesday, June 10, 2014

Honeywell Sure-Set Ceramic Heater with Oscillation, HZ-338 Review

Honeywell Sure-Set Ceramic Heater with Oscillation, HZ-338
Customer Ratings: 3 stars
List Price: $59.99
Sale Price: $49.95
Today's Bonus: 17% Off
Buy Now

Got one of these today. Thot the other guys that had this problem were just unlucky, and decided to trust the Honeywell name. Boy, was I wrong. SureSet, my foot. The thermostat in this device does indeed seem to be measuring the temperature of the unit itself, although not the actual element, maybe the heated plastic body. I do not recommend that anyone buys this heater if they want to use the automatic mode. It functions well in the high and low constant heating mode. I have a lasko 5365 heater as well, that works well in all modes.

Update: Lasko 5365 is displaying same odd thermostat behaviour, I am beginning to think this behaviour is a product of the environment where the heater is used, and not just poor manufacturer design.

Update 2: Confirmed that 5365 thermostat works fine if heater placed in middle of open space to be heated as opposed to against a wall. HZ-338 thermostat performance doesn't seem to improve when in open area.

Click Here For Most Helpful Customer Reviews >>

I purchased a white version of this heater elsewhere about a month ago. I love it. It is in my daughter's bedroom, which tends to be colder than the rest of the house.

At night, I turn it on to the low setting, set the temperature, set the timer, and it does the rest. It isn't as loud as my older heater that it is replacing, and I don't have to worry about remembering to turn it off in the morning.

I have since purchased a second one for my bedroom.

I have not had any of the problems the other reviewer mentioned.

Best Deals for Honeywell Sure-Set Ceramic Heater with Oscillation, HZ-338

The thermometer of this heater is completely messed up. It does not measure the room temperature, but the temperature of the air that has just been heated up. In other words, if your room temperature is 60 degrees and you program it to heat up the room to 70 degrees it will do so (according to the thermometer reading) in less 2 minutes and stop. If you do not use this functionality, but instead let the heater run for some time (5-10 minutes) the thermometer will want to make you believe that the room temperature has gone up to 90 degrees. The thermometer is probably in the wrong location. Did Honeywell do any kind of testing before putting this model on the market ?!

Honest reviews on Honeywell Sure-Set Ceramic Heater with Oscillation, HZ-338

Ditto the other's observations... The thermostat seems to register the temperature of the unit itself rather than the room... I had the thing in a 63 degree room, had it set to 85 degrees. It would register 90 after 30 seconds of running, turn off, slowly ramp back down to 84 degrees over a 2 minute time period, and then repeat. The temperature of the room never got above 64 degrees....

Find helpful customer reviews and review ratings for Honeywell Sure-Set Ceramic Heater with Oscillation, HZ-338

My daughter has been using this unit in her bedroom everyday this winter. It does a good job of heating her room. HOWEVER I've noticed that the plastic case has actually started to warp and MELT, the seam where it's put together is starting to open, you can see the wiring inside.

Buy Fom Amazon Now

Sunday, June 8, 2014

Reviews of Dimplex Essex Electric Fireplace in Warm Oak

Dimplex Essex Electric Fireplace in Warm Oak
Customer Ratings: 5 stars
Buy Now
I have been wanting an electric fireplace for a very long time. This one popped up at huge discount one day and I bought it, without regret. It was very easy to assemble and put into place by myself. I am very pleased with the look of the piece and the flames are very realistic....I keep expecting to hear crackles! A portion of the top metal frame was bent, it doesn't take away from the appearance and the fireplace functions exactly as it should. It is quiet except when the flames are set on the highest settings; then you here the click,click,click of the mecanism inside. I love my fireplace and recommend this purchase....I can't say that I would purchase it at nearly $2000 though.

Click Here For Most Helpful Customer Reviews >>

Saturday, May 10, 2014

Intermatic FF12HHC 12-Hour Spring Loaded Wall Timer, Brushed Metal Review

Intermatic FF12HHC 12-Hour Spring Loaded Wall Timer, Brushed Metal
Customer Ratings: 5 stars
List Price: $28.41
Sale Price: $21.80
Today's Bonus: 23% Off
Buy Now

Intermatic FF12HHC 12-Hour Spring Loaded Wall Timer, Brushed Metal

This was our seventh Intermatic spring-loaded timer 6 on fans and one on a heat lamp. They all seem to be about the same quality. They are now made in Tunisia. Intermatic makes timers with mini-cover plates, which fit in single or multi-gang electric boxes. This model is designed to fit only a single gang box, since it includes a full single-gang cover plate.

The electric box this device is to be installed in needs to be at least 2.5" deep; and deeper is better. This is because the device is nearly 2" deep and you'll need room for the house wiring. The timer fits snugly (height / width) in a steel electric box, so there's no room for wires on the side. This timer is for single-pole installations only. It won't work to replace a 3-way switch, such as found at the top & bottom of a staircase.

Although the product title says brushed metal, the cover plate is metallic-colored plastic.

These are NOT totally silent timers. I took the timer mechanism out of its Bakelite case once they are 100% mechanical, similar to a wind-up alarm clock. Listen carefully and you can hear the timer gears whirring and clicking. That's fine if it controls a fan that itself makes some sound, but if it's for a light in a quiet room, the timer sound is more obvious. Also, when it shuts off, there's an audible snap. I wouldn't recommend any wind-up timer for a bedroom where you're trying to sleep. For a silent timer, consider a product such as the Woods 59014 Decora Style 12-8-4-2 Hour Preset Wall Switch Timer, White, 12-Hour

This timer has no external installation wires. To connect it electrically, remove ½" of insulation from the house wiring; tighten the hot lead under the bottom connector and the lamp or fan wire under the top connector. (Reversing these two wires on the timer works and is perfectly safe, although the National Electric Code says to put hot wires on the lug where the switch says it belongs.)

If your timer doesn't behave as described below, return it immediately for a refund or replacement. All seven of our timers work as they should -i.e., turn the knob:

clockwise to turn the power on to a set time (you're supposed to turn past 2, then set it)

counter-clockwise to reduce the time remaining

fully counter-clockwise to turn power off

If the knob should ever crack, call Intermatic and ask for a replacement. They'll probably send you one for free...

Click Here For Most Helpful Customer Reviews >>

I use this to control roof heaters to prevent ice dams in the winter. It works as advertised and is suitable for this high wattage application, which an electronic timer would not be. Easy to install. Good quality.

Best Deals for Intermatic FF12HHC 12-Hour Spring Loaded Wall Timer, Brushed Metal

Easy to install with good instructions. May be a little short on the time marked but works fine after 3 weeks of use. Good deal for the price.

Honest reviews on Intermatic FF12HHC 12-Hour Spring Loaded Wall Timer, Brushed Metal

We have yet to install this, so cannot vouch for its quality while in use. The picture here on Amazon is incorrect. The actual product has a hold bar after the 12 hour mark. Also, it is not brushed metal. It is brushed metal-looking gray plastic. We are installing this to keep our kids from accidentally turning on our gutter heaters all summer and running up our electric bill during the summer. Will post updates after it has been in use.

Find helpful customer reviews and review ratings for Intermatic FF12HHC 12-Hour Spring Loaded Wall Timer, Brushed Metal

this is used in a high traffic area. We put this timer in and a sign asking people not to try to turn it off.

Buy Fom Amazon Now

Monday, February 3, 2014

Best Programmable thermostat TH140-28-01 Deals

Programmable thermostat TH140-28-01
Customer Ratings: 5 stars
Buy Now
For three years we have had two of these Aube 7-day units controlling two zones of radiant heat from an oil-fired boiler. We have been very happy with their trouble-free operation. I later purchased another brand that was on sale but found it was not as convenient as the two Aube units I was using. I then decided to purchase a third Aube TH140-28-01 thermostat, and I again find it the easiest to program and use, and again it is a thermostat that evenly controls the room temperature. This new Aube unit is working adjacent to another radiant zone's manual thermostat and is connected to an LPG 3-sided glassed fireplace. We keep the radiant zone at 67F. The digital thermostat comes on at 6 AM abd warms the open living area and kitchen zone to 72F and maintains that temperature until evening when the digital drops back to 64F, which then allows the radiant portion to keep the floors warmed at 67F through the night. My result has seen a true cost savings of more than $200 half way through our cold Maine heating season. We are now the most comfortable we have been in the past four years. I truly recommend this Aube thermostat. It is easy to program and install.... and it looks nice on the wall. Also, if I over-ride the program momentarily, I leave the door cover open as a reminder that I need to return it to its programmed control.

Click Here For Most Helpful Customer Reviews >>

Monday, January 6, 2014

Cheap XtremePowerUS 4 in 1 Newspaper, Paper Log Briquette Maker

XtremePowerUS 4 in 1 Newspaper, Paper Log Briquette Maker
Customer Ratings: 5 stars
Buy Now
This item is a stout piece of equipment and will get the job done. It appears to be made in Germany--all the instructions were in German and id did not say "made in China" anywhere. I am good with German quality. The item works as advertised and will have a long service life. In the course of an hour I was able to press out 48 bricks from my pre-soaked paper mash. This is a must-have item for anyone seeking to reduce their dependence on the grid. Skip the single brick maker and knock out the job in record time.

Click Here For Most Helpful Customer Reviews >>

Took me a little while to get my process down. Once I did a little research on how to prepare the paper properly, I have been making nice full bricks that are very compact. Key to the process is not to get in a rush. Soak the paper for several days. Someone also suggested that you can add tbsp of bleach to the water and it will help to break down the paper. Just added some to my next batch, so we'll see how it goes. Newspaper works the best and it binds together really well. If I have a lot of regular paper, then I add some newspaper to the batch to help it hold together. As for the burning don't know just yet as my first bricks are still drying. It takes a few weeks for them to fully dry, so you need a place to store them on a rack until they are dry. Comparing the size to a regular piece of wood, they should burn for 30-45 minutes.

UPDATE: All is going well with this. I have somewhere around 200 bricks so far in about 4 months. The product does work as described and I have gotten consistent results. You need to have a designated area to hold/house the materials though. I have about 6 buckets with lids that I load shredded paper into, then when they are full I add the water, let it break down, etc. and do them in a large batch. Also before I start, I have a paint stirrer for a 5 gallon bucket that fits in my drill. I churn up the paper with that to help break it up into smaller pieces. Tried doing it by hand, but it was tiring! Getting the paper broken up into smaller pieces helps it to compact better and you have a denser brick. You have to have a wire rack or somemthing similar to dry these. It does take several weeks for them to fully dry. During the summer months when there was no rain, I rolled my rack out into the sun and it reduced the drying time greatly. Storing them isn't a problem as they stack neatly but you still have to have a spot to put them! It is a bit messy also, so that is why I like to do a larger batch at once on the back deck then I can wash it down as you are going to have little bits of paper everywhere. I did have the opportunity to burn some since it was cool this spring and they did very well. Burned around 30-45 minutes with not a lot of ash left. I plan on using these along with wood, but hoping to cut my wood usage by at least half. I hope this gives some help to those of you who are "on the fence" on whether to buy or not. Works great and I am happy with it.

Best Deals for XtremePowerUS 4 in 1 Newspaper, Paper Log Briquette Maker

Overall it is a good "go green" product that serves its purpose. The instructions came in German which is not a huge deal since it is self explanatory to use. It does need a lot of pressure to squeeze out the paper. I nor the other woman I did this with at the office did it very well. A man came by to help us which solved the problem.

Our first paper bricks did not come out very well. They did not bond as anticipated. They were soaked over the weekend with a tab of bleach, as was seen on one of the Youtube video'sperhaps this was why. Living in Alaska, the temperatures are still low during March =) We have had it sitting on a heater for 5 days and is still wet. I think it will take 2-3 weeks to dry.

Originally we got this for a youth group to use, which is still possible. Going to try again this weekend, without bleach, to see if that changes anything.

The product was as expected.

Honest reviews on XtremePowerUS 4 in 1 Newspaper, Paper Log Briquette Maker

Process makes more of a mess than I thought. Bricks take longer to dry out than I thought. But this is exactly what they said it would be. I'm waiting to see what the burn time and ash production is.

Find helpful customer reviews and review ratings for XtremePowerUS 4 in 1 Newspaper, Paper Log Briquette Maker

This device is pretty amazing! We have recycled mounds of paper into burnable fireplace logs, plus the drying process puts needed moisture in the air. It has held up quite well and the "logs" stay together well when the paper is soaked long enough. Very handy!

Jenni

Ohio

Buy Fom Amazon Now