Discount Culligan HF-150A 3/4-Inch Whole House Sediment Water Filter

Customer Ratings:
List Price: $19.99
Sale Price: $15.39
Today's Bonus: 23% Off

In response to the 2 main problems other reviewers report with this product, my experience is that they can be resolved with minimal effort.

3/4 inch threads not sealing. I had no problem with this. I used thread tape, wrapped around the male fittings 4-5 complete turns, CLOCKWISE (important). I then threaded my fittings into the housing until they seated against the housing (my fittings have a collar), tight but not ridiculously tight. No leaks under normal household water pressure.

10 inch filters not fitting into housing. I purchased Culligan 20 micron filters and Purenex 5 micron filters. Purchased the Purenex because Amazon was out of the Culligan 5 micron. The Culligan filters are 9 5/8 inch long and have hard plastic caps on each end. The Purenex are 10 inch long and do not have any caps at the ends, they are all "filter". Needing to use the 5 micron, I inserted the 10 inch Purenex into the housing and screwed the base into the top and yesthe filter seems to be too long for the housing. I continued to screw the housing together, a little forceful, until the 2 pieces seated together. I encountered no leaks here either. I then checked the filter to see if it was crushed or distorted and it was not. Thus I think one can use 10 inch filters, they just need to be screwed on more tightly and the filter will conform. Also, as another posted; you could easily cut the filter shorter.

Very happy with the housing, made well, does exactly what I need; which is to pre-filter for a smaller micron filter in our roof-fed cistern water system.

Click Here For Most Helpful Customer Reviews >>

I am using this filter for all of the water coming into our trailer at a seasonal campground, in a "whole house" type configuration. Not sure exactly what was in the water, but it had a distinct taste and smell, and when boiling water for pasta, it would turn orange. After running water through it for only a minute, I removed it and looked at the filter and it had captured a surprising amount of "orange stuff". The filter does not seem to slow our water pressure at all.

The only issue I have with this filter, which I saw mentioned by other reviewers, is that when screwing in a standard 3/4" plumbing fitting into the filter, you need to use A LOT of teflon tape so that it does not leak. I had to put on teflon tape, put together, test, see leak, and repeat a number of times.

Best Deals for Culligan HF-150A 3/4-Inch Whole House Sediment Water Filter

There's one flaw that makes the Culligan HF-150A unusable, at least for me: The NPT threads for the inlet and outlet are cut incorrectly and do not work well with standard fittings.

As everyone knows, NPT threads are cut on a taper, so that the pieces snug into each other as you tighten. Both threads on this filter are cut too large. When you try to screw in standard NPT compression fittings, the fittings bottom out before becoming acceptably snug. (I wasn't even using a wrench; I was tightening them by hand!)

I discovered this while I was dry fitting everything, and without thread tape. However, several professional plumbers at the local plumbers' supply house agreed that all was not right with this unit. They tell me that one would expect that the fittings should get snug well before bottoming out, even without thread tape.

One plumber at the supply house suggested I kludge it with LOTS of thread tape, and maybe a water hose gasket; others suggested trashing this unit and getting a "good" one. Not wanting to kludge or experiment, I went with the latter suggestion ditched this filter.

Note: The instructions talk about using a "BF-34" fitting kit to install this. Perhaps the only fittings that work with this are the BF-34 fittings. I don't know. As I said above, I gave up on this filter.

Whatever filter you end up using, I suggest putting a cut-off valve on *BOTH* sides of it; that will make filter changes much easier. Being able to isolate the filter on both sides, you won't have to turn off the water supply on the inlet, and won't have the rest of the plumbing draining on your face through the outlet.

Caveat emptor.

Honest reviews on Culligan HF-150A 3/4-Inch Whole House Sediment Water Filter

Works great! I had a hard time finding this in the hardware stores.

The description on this item was just what it said it was and fast delivery.

I would recommend to anyone

Find helpful customer reviews and review ratings for Culligan HF-150A 3/4-Inch Whole House Sediment Water Filter

This one is solid, does not leak and said to last 10 years. I used PVC fittings w/ teflon tape, don't know about copper or plastic. The clear housings are more likely to crack or leak so I read. You need to shop around for the right filter. This one takes 9 & 3/4" not the 10".