Showing posts with label water heaters electric. Show all posts
Showing posts with label water heaters electric. Show all posts

Monday, November 3, 2014

Reviews of Mr. Heater MH15T Single Tank Top Outdoor Propane Heater

Mr. Heater MH15T Single Tank Top Outdoor Propane Heater
Customer Ratings: 4 stars
List Price: $63.69
Sale Price: $35.67
Today's Bonus: 44% Off
Buy Now

I needed a gas heater for a Diwali lawn party. The big ones from Costco were too expensive. So I took a chance and bought this contraption that attaches to a propane tank. Installing it was easy. Starting it was also simple, just follow the instructions to the letter: instead of a match, use a lighter for a steady flame. Once it started up, it ran for 3 hours at the 'low' setting and the tank was still half-full at the end. The heat was more than adequate in a five-foot radius around the tank. I would definitely recommend this!

Click Here For Most Helpful Customer Reviews >>

Perfect for small garage like my, (large 1 car) works great, economic to run and very quiet, service was very good with quick delivery.

Basically the same heater I had before from Colman with a tilt feature, lasted a good 15 years.

Best Deals for Mr. Heater MH15T Single Tank Top Outdoor Propane Heater

i bought this heater about 6 years ago from a hardwere store, i have yoused it for ice fishing, it gets the shanty so hot we have to leave the door open some,,it also came as a life saver during power cuts in the winter,it heats good on just the lower setting,,it is exalant value for the money.

Honest reviews on Mr. Heater MH15T Single Tank Top Outdoor Propane Heater

I use these to heat my 30 x 35 greenhouse.If the temps go into the mid 20's then I fire up the second one.In my gh they raise the temperature about 12 degrees.

Find helpful customer reviews and review ratings for Mr. Heater MH15T Single Tank Top Outdoor Propane Heater

i have been using heaters like this for years now .

this is the 3rd one i have bought for my shops office , restroom and kitchen areas .

the rest of my shop i heat with a big propane heater but very little if any get's into the office area so i use this type of heater for that . when i get in every morning i turn it on the low setting and it then runs all day for about 10 hours i'm there 6 days a week . i burn about 50 LBS of propane every week so it's not to bad with that and it keeps the office about 70 to 75 degrees from the 55 to 60 degrees it is when i 1st get into the shop in the morning . it will warm the office up in about a hours time this is a cement block building that gets very cold when the out side temps are around 20 to 30 degrees .

on very cold days when it's in the single numbers i will turn up the dial to high and it will use more propane but it still keeps the office nice and warm .

Buy Fom Amazon Now

Wednesday, May 28, 2014

Review of Conair Compact Fabric Steamer

Conair Compact Fabric Steamer
Customer Ratings: 4 stars
List Price: $34.99
Sale Price: $30.24
Today's Bonus: 14% Off
Buy Now

I just bought this a few hours ago. I hate ironing. I use standard business button-down shirts daily.

I have a portable chin up bar set up in a doorway that's perfect for hanging clothes on hangers, and it works great in conjunction with this steamer.

I think that if more people actually read the operating instructions, there would be more favorable reviews.

You need to keep the steam-head pointed upwards only, at all times, so that condensation can drop back down into the steamer. If you point the head in any other direction, you'll definitely get a little water. The instructions clearly point that out.

I also used "distilled" water since I live where the tap water is very hard and would clog it in short order I'm sure.

Using distilled water is a no-brainer no matter where you live. Minerals will eventually clog it up, though you can de-calcify the unit, as laid out in the instructions as well.

It's a simple device. You pour water in, it gets heated, and steam escapes from the holes in the steam-head. Between garments you just hang the steam head on the provided hangar which just slips over the top of the door.

In my opinion, this is SO MUCH BETTER that ironing. I hate ironing. This is great.

Simple device, easy to use, great results.

Also, as stated in the instructions very clearly, the hose will be stiff before use. The steam/heat loosens it up. Simple physics.

I've only used it this once, but so far I'm very pleased. Using distilled water should prolong it's life.

I would recommend it.

Mark

Click Here For Most Helpful Customer Reviews >>

Spits more water than steam. I have tried cleaning the machine with no improvement. Also the hose is very stiff which makes it hard to maneuver. Poor design, cheap materials.

Best Deals for Conair Compact Fabric Steamer

I've waited a few weeks before posting my review, but I really was in love with this steamer from the very first use. I did a lot of online research before choosing this one, and it has exceeded my expectations. I am a vintage/second-hand dress dealer online; I buy most of my stock in thrift stores, and, honestly, my top priority in buying a steamer was to guarantee that no pesky critters travel into my home or my customers' homes (Los Angeles has recently out-stripped New York in the bed bug wars, and steam kills 'em! Why take a chance, when peace of mind is this easy).

It actually does a better job of freshening things up than I expected; it even cleans off the white deodorant residue that sometimes smears all over the inside of a dress when a gal just tries it on. It de-wrinkles most fabrics beautifully, it's almost like magic with rayon, silk, and knit blends (but it's not quite so efficient on very creased woven cotton). It perks up wilted trim, like bows and pleats. Basically, it saves me a lot of time and money at the dry cleaners; and it allows me to describe an item as GREAT or EXCELLENT condition, when it might have been GOOD or VERY GOOD before steaming. So it's fantastic for my business (look for Johnny Bombshell on facebook!).

It's extremely lightweight and easy to use; I have experienced minimal sputtering (nothing to complain about) once or twice, but mostly it's just lots of nice quiet steam, and it gets the job done in no time. Just keep in mind that this is not a heavy-duty professional steam-cleaner; it's a small fabric freshener/de-creaser that, as far as I can tell, does exactly what it says it's going to do. Five stars!

Honest reviews on Conair Compact Fabric Steamer

I bought my first one of these a few years ago and it worked great. Hardly any spitting. I refused to buy water to put into a $30 steamer, so after a year and a half of filling it with water from the Brita, I was not surprised when it stopped working. I had expected that to happen eventually, but I liked that one so much I decided to go buy another of the exact same one. The second one I got was like a completely different product. The hose was not as flexible as on the first one and it spit like crazy, even when being held perfectly upright. I have solved this by putting a sock around the top with a rubber band securing it (otherwise the steam comes out of the sock opening). Those of you who have had problems with the steamer spitting may want to try this. It helps considerably. With all that being said, after this one breaks, I will not buy this steamer again, I would dive in and buy a more expensive model and actually buy water for it.

Find helpful customer reviews and review ratings for Conair Compact Fabric Steamer

I received this steamer as a wedding gift a year and a half ago after daily use it's given out on my husband and I, but for under 30 bucks I'm back to get a new one! Ever since getting this steamer, we have not used our iron once.

Pros:

-Easy-to-use

-Gets the wrinkles out in half the time as ironing

-I hate ironing so this takes the cake for me

Cons:

-You have to keep the hose elevated or else it will spit out water. This was a problem for me since I wanted to steam bedsheets, mattresses, furniture, and the like

I've never used a professional steamer, but this fit my husband and I perfectly for taking the wrinkles out of our daily business clothes.

Buy Fom Amazon Now

Tuesday, March 25, 2014

Boston Ceramic Space Heater with Fan, Black (25962) Reviews

Boston Ceramic Space Heater with Fan, Black
Customer Ratings: 3.5 stars
List Price: $79.96
Sale Price: $35.99
Today's Bonus: 55% Off
Buy Now

i unwrapped the heater, made sure it was on 0 as per instructions, started to put the plug in and there was a loud POP!, burning smell, part of the metal part of the plug melted and it was blackened. didn't even get the plug in more than a centimeter. wasn't the socket, b/c that still worked (for my air conditioner--a dedicated outlet) right after. am sending it right back! it really should be given zero stars.

Click Here For Most Helpful Customer Reviews >>

Sending it back. A little bit too audible of an air flow sound for my cubicle environment. Should be fine for home use.

Best Deals for Boston Ceramic Space Heater with Fan, Black (25962)

Hi. I bought this Boston Ceramic Space Heater, black (25962) October 13, 2012. It quit workinhg on HI about a week and a half ago. (Until then it worked very well). That's about four months of being happy with the product. I had a milk house heater type that worked very well for years. So I almost bought another one. I should have. Don't buy this Boston ceramic heater. I am exceedingly disappointed! Thanks, Richard

Honest reviews on Boston Ceramic Space Heater with Fan, Black (25962)

This is a great little heater. It is just right for my office. Kind of loud, but I loved it.

Find helpful customer reviews and review ratings for Boston Ceramic Space Heater with Fan, Black (25962)

It was a little smaller than what I had anticipated, but it is perfect for my small bathroom. I don't have ventilation in the bathroom, and this heater dries out the humidity in it.

Buy Fom Amazon Now

Tuesday, February 4, 2014

Buy PATIO HEATER COVER

PATIO HEATER COVER
Customer Ratings: 3.5 stars
Buy Now
Why pay more? All you want to do is keep your patio heater from rusting or becoming a critter nest. I have 2 which have been through rain and storm. No problems. Thought they might be flimsy, but they are fine.

Click Here For Most Helpful Customer Reviews >>

We feel like the covers are a good value for the money and so far so good. We have only had them for a few weeks but the covers are doing exactly what we bought them for, to protect the heating elements!

Best Deals for PATIO HEATER COVER

good price. still in one piece after years of use by the beach! love it. kinda thin, but who cares. my heater is rusting faster, this will probably out last it.

Honest reviews on PATIO HEATER COVER

Like everything else that is manufactured, heaters are not made to any kind of standard dimensions. The cover I bought did not fit over my heater as the cover diameter was too small. Between the postage of sending it back along with the stocking fee it would have cost me more money to send it back. So I donated it. If you but one, make sure it will fit.

Buy Fom Amazon Now

Wednesday, November 27, 2013

Cheap Simply Automated ZPCI-P50A Universal Plug In Phase Coupler

Simply Automated ZPCI-P50A Universal Plug In Phase Coupler
Customer Ratings: 2.5 stars
List Price: $79.95
Sale Price: $64.00
Today's Bonus: 20% Off
Buy Now

This big gizmo phase couples nothing at all. It's easy to install at the clothes dryer, and it should work there. But it does not. Returned it.

Click Here For Most Helpful Customer Reviews >>

This item did not work for our home's X10 application. We previously had a repeater/coupler on our dryer and all the X10 signals would go across the two legs of our home. We changed our dryer to a 4 prong and the old repeater/coupler could not be used anymore. We purchased this phase coupler for our range and it would not repeat the X10 signals across the two phases in our home. We ended up returning this unit and purchasing a 4 prong repeater/coupler again for our dryer. Now, our X10 signals are reliable again across the home. It may work for you, but didn't for us.

Best Deals for Simply Automated ZPCI-P50A Universal Plug In Phase Coupler

I bought this so the two phases would be coupled in order to use my X10 controlling system. It functioned for 2 days then stopped working, without explanation. I returned it as the two phases were, in the end, not coupled for my purposes. Returned it.

Honest reviews on Simply Automated ZPCI-P50A Universal Plug In Phase Coupler

This thing works great. Before installing, some of my X10 modules didn't work on certain circuits in my house. When leaving on long trips I had to run extension cords to some lamps in different rooms so as to give the house a lived in look. Now all those problems are gone, and what an easy install.

Buy Fom Amazon Now