Showing posts with label water heaters gas. Show all posts
Showing posts with label water heaters gas. Show all posts

Saturday, January 24, 2015

Review of Intermatic FD60MH 60-Minute Spring Loaded Wall Timer, Ivory

Intermatic FD60MH 60-Minute Spring Loaded Wall Timer, Ivory
Customer Ratings: 4 stars
List Price: $22.08
Sale Price: $19.70
Today's Bonus: 11% Off
Buy Now

THE HOLD ON THIS IS SPRING WOUND TIMER DID NOT WORK.

I WROTE ASKING TO HAVE IT REPLACED--TO NO AVAIL.

Click Here For Most Helpful Customer Reviews >>

These things are great. Everything about it it was exactly what I expected. Great. more words are required for this review. OK. Great Great Great Great And Great

Best Deals for Intermatic FD60MH 60-Minute Spring Loaded Wall Timer, Ivory

Was easy to install, and very easy to use. It now keeps my bathroom vent going a little longer to reduce the moisture.

Honest reviews on Intermatic FD60MH 60-Minute Spring Loaded Wall Timer, Ivory

The timer works well, time is accurate, and hasn't malfunctioned in about a year of use. My only gripe is that it's a little loud when it clicks off. Not a huge problem, I would still buy another.

Find helpful customer reviews and review ratings for Intermatic FD60MH 60-Minute Spring Loaded Wall Timer, Ivory

I have the Intermatic FD60MH 60-minute Spring Loaded Wall Timer wired to a towel warmer. It works quite well, but is a bit noisy. You can hear it ticking 10 feet away. It seems very well made and will probably be quite reliable over the years. Since the timer uses a spring mechanism, it does not draw power to use it, or in standby mode, as some digital timers do. The small form factor of the timer allows it to be installed in a double wall plate with another switch next to it.

Buy Fom Amazon Now

Sunday, January 11, 2015

Holmes HFH105 1500-Watt Portable Electric Space Heater Review

Holmes HFH105 1500-Watt Portable Electric Space Heater
Customer Ratings: 4.5 stars
List Price: $44.00
Sale Price: $22.49
Today's Bonus: 49% Off
Buy Now

I purchased this heater to warm my office at school...the nuns won't turn on the radiators until you can see your breath...inside the building! I have 13 foot ceilings in this office and it keeps it toasty. I've been very pleased with it's performance, especially since I paid only $9.95 for it! The fan feature comes in handy, as there is, of course, no air conditioning at school either! Great value, great product.

Click Here For Most Helpful Customer Reviews >>

The product works as well as I expected it to, but it is a little louder than I had expected.

Best Deals for Holmes HFH105 1500-Watt Portable Electric Space Heater

These portable electric heaters are small in size but have given off ample heat when needed in a pinch in those early morning hours when trying to get kids out the door for school.

Since I was already familiar with the model HFH 104, that I sold over the summer on eBay, I figured the model HFH 105 would be similar. They both have the two heat settings of 1000 and 1500 watts and the power light plus a fan only setting. Also included in both models are the auto safety shut-off and the cord wrap.

The carry handle and cord wrap are easier to utilize in this model of the Holmes Portable Electric Heater, HFH 105. It is advised not to use an extension cord unless you absolutely have to, and with limited electrical outlets in the duplex we reside in I have to use extension cords through out the house. I have only utilized these heaters in the living room and for limited time in the morning and evening hours.

This is a compact design, but it resembles a flimsy version in a dark drab gray shade. The switch is located on the right side and turns from fan to low and high heat setting. This unit has been tested beyond the UL standards and comes with a booklet showing ten safety tips for use and care of the heater. This is similar to the other version. Basically the heaters should not be used in bathrooms or outdoors and nothing flammable should be near it or bedding or curtains. The cord should not be placed under a rug and do not insert any foreign objects into the unit.

The fan setting worked very well giving off some cool air and tricked my son into thinking heat was coming out. I was not as satisfied when making the purchase the first few days with the heat output compared to the HFH 104 unit. That model seemed to heat the room quicker and more efficiently. The pedestal base is flimsy on this unit and appears cheaply made. This unit was always placed flat on a surface intended for such items. There would never be any other items on the same table as the heater when it was turned on.

This is cheap, easy to carry, but smells like smoke when you first turn it on.

Honest reviews on Holmes HFH105 1500-Watt Portable Electric Space Heater

I BOUGHT THIS FOR MY BROTHERS ROOM AS IT GETS COLD ON THOSE WINTER NIGHTS AND I DIDNT WANT HIM TO FREEZE GOT THIS HOPING IT WOULD AT LEAST MAKE IT MANAGABLE FOR HIM. BUT WE SOON FOUND OUT THIS HEAT KEEPS HIS ROOM SO WARM THAT YOU DONT EVEN NEED BLANKETS TO KEEP YOU WARM! HES VERY SATIFIED! HOPE THIS WAS HELPFUL!

Find helpful customer reviews and review ratings for Holmes HFH105 1500-Watt Portable Electric Space Heater

I use this in my office to keep warm (even in the summer -they set the thermostat at 68 degrees), and I love it. It is a little louder than I had hoped, but am getting used to it and it kind of drowns out the surrounding office noise. It works really well for my 10 x 10 ft office!

Buy Fom Amazon Now

Monday, December 15, 2014

Afinia 3D Printer H-Series Review

Afinia 3D Printer H-Series
Customer Ratings: 4.5 stars
Buy Now
I own 2 of these printers and am buying a 3rd in the next few weeks. my printers run 24/7 building parts for my business. they are both trouble free. i install a clean nozzle and recalibrate nozzle height every week. that's it.

i run the cheapest abs available and have no problems at all.

print quality is GREAT.

the software that comes with the printer is GREAT.

my printers have no faults at all.

these are truly commercial quality printers.

update 2-13-13:

running three of these now. fried a cpu on one, table heater failed on another. ALL covered by warranty. have an occasional plugged tip but that's it. these are bad boys :)

Click Here For Most Helpful Customer Reviews >>

Having owned another brand of 3D printer, and researched many others, this printer is hands down great! Fast prints with low resolution, slow prints with high resolution, easy to use software, telephone tech support. The print quality is very good. The software is easy to use. Wonderful. The first and second prints were absolutely great, and they keep being great (dozens so far)! This printer does the best job of documentation, tech support, everything you need. If one does a simple web search on getting ABS plastic to stick when printing, even so, again this printer does a great job with that as the supplied print platform holds the part well while printing.

The printer can be set to print fast (fan flap open or not) with 0.4mm layers, or super high detail with fan cooled 0.15mm slow printed layers. I printed great 28mm models for my 13 year old son, and now he is using it to print his stuff. Impressive detail. As a parent I couldn't be happier. I also print housings for work as fast as they can print, with repeatable great quality. Holds mechanical shapes well. Holes print very well. No post drilling required as the holes print properly! Strong accurate parts.

If you have never printed with a 3D printer before, you might find issues with 3D printing. My only issue, is ABS plastic printers have a tenancy to warp larger parts right where they attach to the build platform. I am experimenting this ABS warping issue, (but this is an issue with all sub ten thousand dollar printers). I have tried many things. So far I found that the supplied printing base works very well,(but parts when printing can come loose). For this price point this is a great printer. (As I understand this, this issue goes away with PLA plastic, but PLA does not have as high a working temperature if one wants to use the parts for real things. PLA gets soft at 60C, and ABS takes at least 110C to get soft, a big deal with parts that might sit in a hot car, or get truck shipped.) Even so, this printer can print PLA!

Update 2/28/2013 Experimenting with part warping where it attaches to the build platform. Works for no warping at all!

A 2mm raft thickness works, (and is truly needed to fully level the build platform).

Keep the fan on. It makes great parts this way, and the rafts are easier to remove.

The only thing that I have found to work (to prevent wapring) is using the ABS/Acetone paint on the supplied FR4 fiberglass build surface they provide. (When applying the paint, remember the holes, and make sure you paint this on something that will not be harmed. I use a glass plate as a backing during painting.) The included documentation tells how to make the ABS/Acetone paint. Then purchase more clips (they supply six of them) and hold the fiberglass build surface fully along the front and back sides (remembering to leave clips off each corner where the nozzle can come down and hit them). I paint this slurry on before each build. The holes in the fiberglass are fully filled with ABS, and a very thin coat in on the top. It is real work to get the part off when done, but the supplied two inch wide putty knife works very well to remove the part. The build surface is very stiff with the holes filled with ABS. Using this I have not had any of the printed parts warp.

The things below were tried and do not work very well, in descending order.

1) I found that the supplied printing base works OK, but parts when printing can come loose, and the supplied build surface with holes can and warp. It is somewhat flexable, and the parts warp even when attached (and can pull up if no ABS/Acetone paint is used).

2) Kapton tape with ABS/Acetone slurry on top holds to the printed part super well to the Kapton, but the parts generally pull the tape up and warp.

3) 3M Blue painters tape (no slurry), as is, holds the printed part super well, but the parts usually pull the tape up and warp.

4) ABS/Acetone painted on glass held the parts, but the parts pulled up and warped.

If your application can tolerate some warping, then

Blue tape on glass seemed easiest. (about $20 for six glass 5.5" by 5.5" plates from a local glass shop) Just replace tape when needed.

The supplied build platform with the holes worked very well most of the time.

All in all, a truly great 3D printer.

Best Deals for Afinia 3D Printer H-Series



my company bought me this to prototype parts for our business. Very easy setup and I disagree with the reviews that say you can't get the platform level: by definition, a plane is defined by three points (there are three screws to adjust the level); it just takes patience. I'll cut to the chase: take the ABS "raft" pieces or any misprints you have so far and add them to 2 or 3 oz of acetone in a Mason jar (or other glass container). Lightly "Paint" (i.e. prime) the FR-4 boards with the acetone/abs mixture (be sure to use a natural brush-horsehair or China bristle). Attach the FR-4 board and preheat for at least 15 min. I have had very good results with this technique so far (i.e. no warping or lifting on the corners like I was experiencing with a plain FR-4 board). I also built a "heat shield" out of a liquor case box to retain the heat (cut holes/slots where needed for the reel/line and "viewports" sealed with clear packing tape).

Honest reviews on Afinia 3D Printer H-Series

This printer falls very short of the mark. Unless you are a die-hard tinkerer who enjoys hours and hours of minute adjustments, failed prints, and concocting your own chemical slurries, stay very far away from this printer.

I have to say that the standards expressed in other reviews are shockingly low. 5 stars for a printer that warps every part over 3 inches? That can only be corrected by slathering a highly toxic and flammable substance all over the $24/pop base plates?

A printer should just work. I have had the pleasure of working with printers that do just this, both in ABS and PLA. Here are some of the more egregious design flaws in this printer.

A print platform that falls with no padding/protection if you turn off the machine.

A set of platform adjustment screws that get just as hot as the platform making later adjustments impossible.

A standard set of print sheets/bases that warp like crazy.

Software that regularly crashes while sending print jobs to the printer.

Software that makes up its own terminology for no-good-reason (e.g. "unload" rather than "delete").

Incomprehensible error messages.

You get the picture. This is not a friendly, simple device. While it may be better than others out there, it simply does not reach a level where it can be called "good."

Find helpful customer reviews and review ratings for Afinia 3D Printer H-Series

I have been using 3D printing for many years. I've owned one of these printers (previously called an "Up! printer) for 2 years. I upgraded it to the newest version. For every 2 prints that work, one fails, although this may have been partially due to using inferior old plastic filament. As a result I often find myself endlessly leveling and calibrating the platform and/or unclogging the nozzle. In addition, the building envelope is small about the size of a coffee cup. Several printers with larger builds are now on the market.

I`d say that most of these consumer grade printers are not quite there yet. Since another professional level 3d printer company still has the patent for a heated enclosed printing environment (important, if not essential for ABS plastic, which will last far longer than the PLA corn starch material), warping and splitting are commonplace. I'd wait awhile before purchasing a 3D printer.

That said, I have read that this is rated as one of the better consumer grade 3D printers on the market.

Buy Fom Amazon Now

Wednesday, October 1, 2014

Cheap Dimplex DFP15-1132NG Fireplace Compact 28 " x 29-3/4 "x 9 "

Dimplex DFP15-1132NG Fireplace Compact 28 ' x 29-3/4 'x 9 '
Customer Ratings: 4 stars
Buy Now
I love this little electric fireplace heater. The fan makes it even better than the oil filled radiator type in many cases because the heat gets distributed so much better. Looks great. The only negative is the bulb for the 'fire' seemed way too hot so I took it out and replaced it with a smaller wattage (maybe 7 watts) so the back wouldn't get so hot. You can't even tell and my 'flames' flicker very nicely still.

I highly recommend this little unit for smaller areas. You'll love it!

Click Here For Most Helpful Customer Reviews >>

I bought this item from New Life Electronics Surplus3, and it was NOT the same item pictured. I deleted my seller feedback because I also had refund issues which were resolved, but I still feel that anybody looking to buy this should know that this particular seller may not send you the item as advertised. The product I received was a completely different model so it did not have faux marble on the front, the dimensions were not accurate, there were no instructions included in the packaging, the remote was damaged, and this thing ran our energy bill up at least 50%. I was promised a new remote, which I did not receive. I was also promised a partial refund initially by the seller, which I never received, and then Amazon issued a full refund but it took quite a while to appear on my credit card bill. The seller, upon receiving negative feedback, began to call my phone several times a day without leaving a message and they also e-mailed me several times complaining that my negative feedback was hurting their business and that my problem was actually with Amazon, not with them. My refund issue has been resolved, but please be aware of these other issues before ordering this item from that seller.

Best Deals for Dimplex DFP15-1132NG Fireplace Compact 28 " x 29-3/4 "x 9 "

I am very please with this item and the seller shipped it to me quickly. If you want to buy from a trusted seller then this is your guy. I am a early riser and the first thing I do is turn it on and sit back and watch the realistic flames, I bought this item for it' price and features and as of todays date I don't regret my purchase. If I had to rate this product and it's seller on a scale of 1 10 I would have to give it an 8 1/2.

Thanks Again

Roger Proctor

Buy Fom Amazon Now

Tuesday, August 26, 2014

Buy Vornado TVH600 Whole Room Vortex Heater, Automatic Climate Control

Vornado TVH600 Whole Room Vortex Heater, Automatic Climate Control
Customer Ratings: 3 stars
List Price: $249.99
Sale Price: $164.99
Today's Bonus: 34% Off
Buy Now

Purchased January 5th, died January 28th. The touch panel illuminates and shows the correct temps, but neither the heat nor the fan turns on. No funny burning smell either. We use it in our 2 yr old's bedroom at night, so about 12 hrs each night for 3 weeks to keep the temp at 73. It hasn't been very cold here, around 60-65 in his small 9'x9' room without the heat on at night. Also, the unit is made in China.

I called Vornado and they're doing the repair for free, shipping included. Hopefully the repaired or replacement heater will be more reliable.

update: After 2 months or so of using the replacement unit, everything is working properly. I would rate customer service 5 stars since they are very friendly, helpful, and in the US.

update 2: the replacement one is broken now less than 1 year later. Heat fires up fine, but no fan. Off to get another replacement from Vornado. Again, customer service is VERY GOOD, 5 stars again. If only their flagship heater could last more than one "winter" here in California, which isn't that cold at all.

Click Here For Most Helpful Customer Reviews >>

This heater is extremely accurate in maintaing the set temp. I have tested it several times against a digital thermometer with memory. With each test, the heater has maintained the set temp. to within .5 degrees, plus or minus of the set temp. These tests have been conducted on 8 hr. time frames.

The remote is very easy to use & is an impt. upgrade, because it allows you to place the sensing device @ any location in the room away from the heater. This gives a much more accurate temp. throughout the room.

The air circulation ability of the vornado heaters is pretty amazing. it really circulates the air throughout the room as advertised. It works slow but effectively.

The heater has been used for probably 48 hrs. of run time. Hopefully, it is durable enough to maintain its current performance over many yrs.

I have two of the vornado VH2 heaters which both failed during the 1st winter of moderate use. I purchased the EH1 heater only after learning that Vornado will pay shipping to return the two VH2 heaters to the factory for free warranty repair & will ship back to me @ no cost. The EH1 also has the free return policy but has a 2 yr. instead of the 1 yr. warranty found on the VH2. Warranty info. that came with the VH2 & EH1 all state that the customer has to pay to ship the product back to the factory and then include $20 for them to ship it back to you. this is basically a worthless warranty and in my call to Vornado, they said that they now pay shipping both ways on all of their heaters.

Best Deals for Vornado TVH600 Whole Room Vortex Heater, Automatic Climate Control

This heater promises a lot, and is certainly on the pricey side for an electric heater. The remote is non-intuitive, and seems to require several button presses to get the heater to respond. The remote's display shows you the current temperature, but not the temperature that you've set the thermostat to -you have to look on the heater itself to see that. It's also easy to change the heat setting (low, high, fan-only) without realizing it, unless you're looking at the heater's display while you're using the remote. All that said, the heater is quiet, and does a good job of heating the room. The auto-off after a set number of hours is a nice feature.

But here was the real problem for me -the heater failed after one week of use. We stepped out of the room for a few minutes, at a time when the heater was not heating, but was still turned on, and came back to a slight electrical odor in the air. The heater was now off, and pressing the "on" button did nothing. I verified that it was the unit and not a circuit breaker in my house. Fortunately, I can return this item to where I bought it within 30 days for any reason. While I have the option of getting a replacement, I don't think it's worth the risk. The manufacturer has a 2-year warranty, but warranty service requires mailing the unit cross-country at my expense, PLUS a $20 shipping and handling fee to get the unit returned to me. I don't want to get another and have it fail 31 days after I get it, so this one is going back. Too bad, because I really like the concept! But poor implementation and apparently poor reliability (sample of one) kills it for me. Not recommended.

Honest reviews on Vornado TVH600 Whole Room Vortex Heater, Automatic Climate Control

Received my order and plugged it in and it heated the room I had it in within a couple minutes. Works as good as advertised if not better with even heat distribution. Now use it to heat our entire downstairs (living room, kitchen, and dining room) during the day, and the furnace very rarely kicks on. When it does it's for less than half the time it would without the Vornado. The real test will be when we receive our first electric bill with this little powerhouse.

Find helpful customer reviews and review ratings for Vornado TVH600 Whole Room Vortex Heater, Automatic Climate Control

We have had our TVH600 replaced 3 times. The first one lasted about 10 months before the automatic turn-off began to just shut the unit off all the time and eventually it stopped working all together. The second unit, we had for about a week and never worked properly! It tripped off constantly and smelled like it was burning, plus the cord would get really really HOT. The third unit worked for 1 day before the thermostat was reading 68 degrees and it was set to 72 degrees and blowing cold air. The company has been absolutely wonderful about replacing the units, but this particular model is garbage, plain and simple. Vornado is going to send me another model, this time, so hopefully this one works.

Buy Fom Amazon Now

Monday, May 5, 2014

Picnic Plus Stadium Seat Review

Picnic Plus Stadium Seat - Black One Size
Customer Ratings: 3 stars
List Price: $44.99
Sale Price: $34.99
Today's Bonus: 22% Off
Buy Now

First there is not enough padding around the frame. Any time sitting in this seat results in excessive pressure on the backs of my thighs. Second the seat back leans too far back and even when strapped to the bench I felt like I was going to tip over at any moment. I used a stick to wedge the back stop up but that was only a makeshift solution that was short lived.

Click Here For Most Helpful Customer Reviews >>

High expectations led to a huge let down. I had seen a similar seat at a recent sporting event, tried it and liked it so I went on line looking for the chair. What I got was sadly nothing like what I tried out in the stands just a few weeks earlier. The seat was uncomfortable with a medal bar running just under the thighs. When I leaned back (as the chair was supposedly built to allow), the underneath fabric that held the velcro in place ripped. After two uses the chair is garbage and I wasted $30+. I have since replaced the chair with two much better ones from Wal*Mart (total price $32). In this instance Wal*Mart was the way to go.

Best Deals for Picnic Plus Stadium Seat

I found the seat to be very easy to carry and to use. It is lightweight and I have physical challenges.

Honest reviews on Picnic Plus Stadium Seat

Excellent product for the money. Very heavy duty. Pockets for phone and misc are great. Unfortunatly the service was horrible. I received only one of two chairs. When I called I was told it would be shipped right out. 3 weeks later, more phone calls, still no chair. It was supposed to be a xmas present that finally arrived after xmas. When I did get it, the carrying strap was broke. I am still waiting on a return phone call for that.Great Product if you can find it from another store.

Find helpful customer reviews and review ratings for Picnic Plus Stadium Seat

My parents took them to the college girls softball games in Oklahoma and they worked great!!! Thanks for the great product

Buy Fom Amazon Now

Thursday, March 6, 2014

Review of Haier 14,000 BTU Commercial Cool Portable Air Conditioner

Haier 14,000 BTU Commercial Cool Portable Air Conditioner
Customer Ratings: 4 stars
Buy Now
Haier CPN14XC99 Portable Air Conditioner review

The recent midwestern heat wave sealed the deal to buy this unit. Costco.com's price was simply unbeatable anywhere else on the web for such an air conditioner. The closest online price on a comparable 14,000 BTU portable A/C was almost one hundred dollars more, for a lesser-known brand.

The Costco.com site proffered that shipping would take 4 days to our ZIP code. The unit was delivered via UPS on the second day after ordering. The driver left it outside our back door. Ordered on Tuesday morning. Delivered on Thursday morning. In the middle of a heat wave. Imagine that.

The CPN14XC99 is substantially bigger than it looks online, and it is heavy-about 95 pounds in the box and about 83 pounds unboxed. Removing the unit from the box required first opening the top flaps and removing the inner box containing the window panels, hoses, hose adapters and documentation; then cutting on a dotted line around the bottom of the box and then lifting the box off the unit. What is left is the air conditioner itself standing in a little island of cardboard and styrofoam about 4 inches high.

There are plastic packing straps running under the unit inside the box to assist in lifting the unit off the remaining styrofoam and cardboard. However I cut the strap while cutting the box open, rendering the straps useless. I bet that happens to a lot of buyers of this unit. I lifted the unit in a bear hug and my wife kicked away the packaging.

Upon inspection, we found that the remote control was missing... or so we thought. We looked everywhere-it wasn't in the inner box with the panels, adapters and hoses, although the batteries were there with the documentation. It wasn't in some cranny in the box's styrofoam, nor in the outer box. To all appearances, we had no remote control. We called the 800 number on the documentation and spoke to a CSR who informed us that he could not send us a remote, and that the people who could would not be in until Monday morning (this was a Friday evening). So we decided to set it up and use it without the remote. We could always call back on Monday.

The CPN14XC99's casters roll easily over hard wood floor and low-pile carpet. It took about 40 minutes and a little ingenuity to fit, assemble and install the window panels. The instructions are not clear, but it is not difficult to figure out with a little thought. The panels included with the CPN14XC99 were just a tiny bit too wide for our double-hung windows, but reversing the short sliding panel allowed for a snug fit in the window frame while extending just a fraction of an inch over the intake hose adapter vent.

There are two hoses, each with one connection adapter attached at one end. The user has to attach the other connection onto the bare end of each hose. I don't know why. If they are going to attach a connector to one end, why not just attach them to both ends of both hoses and ship them that way? There are no instructions on how to attach the adapters to the hoses, so here's how you do it: simply extend the bare end of the hose and screw the adapter over the corrugations until it is secure (almost all the way). That will save you the time and trouble of trying to push or pull it in like I did.

I attached both hoses to the window panel and the A/C, plugged it into the wall and pressed the Power button on the front of the machine. Nothing. I checked the reset button on the plug. The plug (yes, the plug) beeped to say it had power. Went back to the front panel, pressed the button. Nothing. Whiskey. Tango. Foxtrot. Upon further examination of the front panel, I noticed that there was a piece of strapping tape over it. I pulled the tape off and the front panel came off in my hand. It was the remote, tucked safely into its compartment in the front of the unit! Under the remote were the real panel buttons. A press of that power button brought everything to life, and after installing the batteries in the remote, it worked just fine also.

The CPN14XC99 is installed upstairs in the southwest corner room of our old farmhouse. This is the room that gets the most sun exposure from late morning through sunset. It is also the office with most of the heat-generating computer gear. Within one-half hour of powering up the unit, the temperature in the room dropped from 87.5° F to a chilly 69.8°. It also seems to be cooling the rest of the upstairs (two other rooms, a hallway and a bathroom).

Three days later, with heat and humidity around the clock (temps well over ninety, with dew points close to eighty degrees leading to heat indexes approaching or even exceeding 110°) the CPN14XC99 has had its hands full keeping up. It has not faltered or hiccuped at all.

It is a little noisy when the compressor kicks in, but no more than any other window or portable A/C. Three fan speeds are remarkably effective at controlling how quickly temperatures change (or are steadily maintained) in the room. Have not tried the dehumidifier function nor the timer function so far. Nor have I tried using it with only the exhaust hose hooked up as some other buyers have advised. One last positive: we can still conveniently open the window when temperatures drop next week.

So those are the pros.

The only con I have to offer is the lack of lighting on the remote. Without memorizing the six buttons, the remote is worse than useless in a dark room.

[Edited, August 08, 2012]: Over one year on and the Haier continues to prove its worth in one of the worst heat waves and drought in Wisconsin history. I cannot speak highly enough of this unit in the unbelievable muggy, long-term heat wave of July, 2012. As of today, the temperature has finally dropped to more "normal" levels with the same predicted for the rest of the week. But all last month was really bad. Practically all of July provided unrelenting misery with its day-and-night combination of heat, humidity and high dew points. Even when the temperatures dropped, the humidity remained so high that minor physical efforts drenched clothing in sweat and smooth surfaces everywhere stuck to flesh like glue.

Through all of this, this year-old A/C unit provided continuous relief and protected our office electronics from the air's heavy moisture content. Inside our 12x13' office (described earlier), the unit's dehumidifier function was amazing. We could easily detect the change in the air within seconds of turning it on. The only issue for us was that the dehumidifier automatically sets the temperature level to 75° F, which was a few degrees too cold, even without desktop fans running. Seriously, in two years I feel as though we have gotten our money's worth out of this thing. I hope it last another ten years, but even if it doesn't, I have no buyers remorse at all.

Click Here For Most Helpful Customer Reviews >>

Funny thing about this unit. The entire first summer I had it, I was so disappointed at it's lack of cooling capability. It couldn't get my small bedroom more than 2 degrees cooler. The second year I pulled it back out of the garage and was cleaning it up and realized it has a vent on the top of the unit that when you pull it up, allows all of the cool air to come out. Once I did that, it was an unbelievable difference! Although I felt extremely silly for never having realized the vent was there, now that it's been open this summer I can set the unit temp at 65 and curl up on my blankets nice and cool every night. During the day, I open my bedroom door and aim it to blow down the hallway and it keeps my whole upstairs around 73 or so which is reasonable given the size of the floor. Even while cooling the whole upstairs, it still keeps my bedroom at cool 65!

The only con I'd mention is that it never shuts off. It has a temp you set it to and once it reaches that temp, it turns to fan mode. But as long as the power is on, it will run 24x7. I do wish it would turn off once reaching the set temp and back on when needed but other than that it works fantastically. It is a bit loud and extremely heavy. I could not possibly carry it upstairs by myself had to get help. So it's 'portable' as long as you are rolling it from room to room on the same floor, I'd say.

Best Deals for Haier 14,000 BTU Commercial Cool Portable Air Conditioner

Purchased this unit for three reasons. We live in a remote area which is

both vulnerable to power failures and at the end of the line for repair

if a problem occurs. Our backup generator will run the house and

a portable heater/AC but not the heat pump. The unit is perfect for this

and the dehumidificstion function is a bonus.

Works perfectly so far and the dual hose capability is a great feature.

Honest reviews on Haier 14,000 BTU Commercial Cool Portable Air Conditioner

A Colorado room that faces west gets the summer sun and heats up horribly. This one fits in the vertical casement windows and on a 100° day the temperature in the 10 x 12 reached a low enough point the A/C unit shut off completely. Took about 2 hours to get there from full temperature, so it was a challenge that was not easily met.

Find helpful customer reviews and review ratings for Haier 14,000 BTU Commercial Cool Portable Air Conditioner

while it does cool, mine does not get rid of humidity, in fact, when the a/c is running it pumps more humidity (like upwards of 15% higher than in the rest of the house) in rather than removing it. Now I have to run a dehumidifier at the same time just to try and keep the humidity at a bearable level. I would recommend one with the actual bucket you have to empty over this at least that way you know that the water isnt being pumped back into the air.

Buy Fom Amazon Now

Monday, February 10, 2014

Accumulair Carbon Odor Block Filter Reviews

Accumulair Carbon Odor Block Filter
Customer Ratings: 4.5 stars
Buy Now
I really want to love these filters. We have two cats. Two cases of severe seasonal allergies. And an aversion to anything that doesn't smell like Roses. We have five filters installed at once. Can we tell the difference...don't know. Our noses get used to smells quickly. There is no denying they filter well, but I can't tell you they will completely freshen up your home. We are going back to a similar filter without activated-charcoal. If we can then tell the difference, then I will update this post with a higher rating. If we can't...the review will remain the same.

A side note...Customer Service from FiltersNow through Amazon was spectacular!

UPDATE: Over the last few months we have really begun to notice the difference these filters make. Our first example is a visit from a severe, cat-allergy sufferer. A cousin of ours spent nearly an entire week with us and found that his usual cat allergies did not act up at all. Recently, the true test has come. I replaced every carbon filter with a high end 3M filter (no activated charcoal). Within days, we began to feel a general discomfort at constant subtle smells throughout our home. We allowed the 3M filters to do their job for 6 weeks, then went back to the Accumulair Carbon. By the end of the day of re-installation, the house was fresh and comfortable again. We had such a great night's rest that very same night that we ordered a supply of Accumulair to last us the rest of the year.

I am no recommending these strongly to anyone that will listen.

Click Here For Most Helpful Customer Reviews >>

Bought this filter to stop the smell of grass from my lawn mower seeping up from the basement. Does the job as advertised. Definitely recommend and definitely will buy more when needed.

Best Deals for Accumulair Carbon Odor Block Filter

Stinky fumes. Not only do they singe your nose hairs, but chances are they're toxic! Chemicals, cigarette smoke... we know the aren't good for us.

I've always wondered why a charcoal-activated/carbon air filter was never available for whole-house HVAC systems. The makers of Accumulair must have pondered the same thing because here, after all these years, is an odor absorbing air filter for the house!

OK, I'll cut to the chase. This filter does a great job of absorbing household odors. It works like a regular particle filter and is just as easy to install. It's available in every size imaginable (be sure to double-check you're ordering the right one since that dropdown-menu size selector has enough sizes to make your eyes cross).

Four, not five, stars because it's not a super effective particle filter compared to a "regular" non odor-absorbing filter. The filter is more like a sponge material rather than cross-woven fibers or microfibers so there are bigger pores for some dust/allergens to penetrate. Allergy sufferers might fare better enduring the smell of last night's fish dinner instead of circulating bigger particles than a standard filter would catch. But it does exactly as claimed... it clears the funk from the air. (Well, maybe they didn't use the word "funk"...)

Honest reviews on Accumulair Carbon Odor Block Filter

These seem to work pretty well. I rent and am worried about smoke and cooking fumes accumulating. I have a 1 BR apartment with the return duct in an AC/Heater closet located near the kitchen. I would suggest stocking up on these and replace them once every 1-3 months. I suppose it's not going to trap all the smoke and cooking fumes, but it's better than the cheap cotton candy filter material that was in my apartment's heater/ac.

Edit: The new shipment of 6 filters showed more light showing thru the filters, which means they used less charcoal. I was kind of disappointed.

I've since decided these are inferior to Nordic Pure MERV 7 Plus Carbon Air Filters 1 inch. Accumulair reduced the amount of charcoal in their line of filters. You can see right thru them now!

Find helpful customer reviews and review ratings for Accumulair Carbon Odor Block Filter

I believe that these filters work, but if you order them in quantity then they get shipped in packs of two within the same bag and I feel like the quality of my filters was degraded by having to expose 2 to air to install 1. I tried to keep the 2nd filter in the bag as isolated from air as possible until we needed it, but it still seems like we had odor issues using the second filter. To clarify, if you order more than one filter, then 2 come in each bag and you have to expose two to air to get access to one. I will probably look for an alternative that will ship these expensive filters in independent packaging.

Buy Fom Amazon Now

Friday, December 27, 2013

BISSELL PROheat 2X Pet Deep Cleaning System, Blue Illusion, 9200P Reviews

BISSELL PROheat 2X Pet Deep Cleaning System, Blue Illusion, 9200P
Customer Ratings: 4 stars
List Price: $249.99
Sale Price: $185.81
Today's Bonus: 26% Off
Buy Now

Customer review from the Amazon Vine Program This machine is ready to use almost right from the box. You need a phillips screwdriver for 3 screws and everything else snaps into place...perfect for the Mechanically Challenged such as ME. My sweetheart says; "There must be more to assembly", yes... it is that easy and the Alpha Male is disappointed that it does not take hours. The quick start instructions are perfect and have step by step pictures (that made me happy) and note the screws are taped to the handle so please don't go through everything again and again looking for them....Bissell thought everything out and made this EASY.

We started up the machine and worked on a dog urine stain, and this machine does as promised. Actually, it works as good as the professional cleaner we normally rent. It is easy to move when cleaning and the unit is self contained. The solution smells good too. There are tools for steps and furniture, and I don't believe I would any more than what is supplied. I like the fact that the water heats contineously. I have 3 dogs (yes..I am dog crazy) so we will use this quite a bit.

In the future I will update this review as I am eager to see if all this dog hair does not clog the machine. The instructions do say to vaccum ahead of cleaning and we have a Dyson Animal Hair vaccum (also recommend to all pet lovers).

SO far this is a great product....Highly recommend.

Update: We cleaned all the carpets downstairs, our family room has the highest traffic from dogs and people, it was really dirty but looks great when we were done. We worked on a few stains which are resolved. The hot water seems to enhance the cleaning but the cleaning solution does seem to go quickly, so stock up. When we went to put the steamer away, there was dog hair still laying within the front part, I used a wire, hooked it and the hair was removed easily. My husband thought it would be better to unscrew the front and remove it, 20 minutes later he was done. I suggest the wire method, also clean this unit completely before putting away and it should serve you well for a long time.

Update:10-14-13...My brother borrowed this machine and when he brought it back he said he told his wife to go buy one. That's how impressed he was with this machine. BTW...he lives on a farm and all the dirt that goes with it.

Very happy with this product.

Click Here For Most Helpful Customer Reviews >>

Customer review from the Amazon Vine Program I selected this machine specifically to remediate some of the long-term effects showing on a light-colored Berber carpet in our basement. Installed five years ago, it has endured the cumulative effects of three geriatric cats (who often had trouble keeping their dinners down), three rambunctious dogs, the comings and goings of several crowds of autumn party-goers, a sweet 16 party, a couple of New Year's Eve soirees and some on-again, off-again jam sessions with groups of teenage and young adult musicians. Bottom line: we had an excellent 800 square foot test track to work with.

Overall, this cleaner did an excellent job.

Pros:

-Easy assembly. Three screws for the handle, one for the upper hose reel and you're done in less than than 10 minutes. Everything else slides/snaps easily and relatively intuitively into place.

-Detailed user manual and full color quick start guide.

-Good water management system. The water tank consists of an exterior hard plastic tank with an integrated soft inner bladder. You fill the bladder with hot top water, and the cleaning process returns the dirty water into the hard exterior tank (which you empty).

-Cleaned very well. Look: in real life, the difference is never going to be as dramatic as in the marketing pictures. But we had some definite problem areas that showed residual staining even after multiple treatments with various cleaners and spot removers. This machine took care of those, as well as some ground-in soiling from where an HVAC crew had worked to replace a heat pump two years ago.

-The cleaning tool extension worked well on carpeted step treads.

Keeping this machine from five stars:

--no real good way to tell when the fresh water bladder is empty (and several times it was empty before I noticed). So you'll need to check often as your work proceeds.

--the tool hose is for use with both furniture and stairs. As a stair tool, it's only long enough to reach about halfway up/down a typical 13-step staircase, so you'll have to plan your work accordingly. Expect to either carry it over your freshly cleaned --but not yet dry-treads (or carry it all the way around the exterior of your house if you have exits at both levels).

Finally: this ships with enough Bissell 2X concentrate cleaning solution to fill the reservoir (in a water/cleaner mix) one time. My local Wal-Mart doesn't carry this, but does carry a 2x concentrate for carpet cleaners by Resolve; the Resolve brand is marked for use with Bissell cleaners and works just fine (even though the user guide says "Bissel brand cleaner only). Just make sure you have enough hand when you start. I got about 800 square feet of carpet cleaning with a single reservoir fill-up. FYI, the Bissell product has slight citrus scent when first applied; it rapidly dissipates.

Best Deals for BISSELL PROheat 2X Pet Deep Cleaning System, Blue Illusion, 9200P

Customer review from the Amazon Vine Program Well, this is one of those mixed bags it certainly fulfills it main function as advertised, but anything else ranges between annoying and downright unacceptable.

Let's start with the positive aspects:

The Bissell effectively removes even very tough stains, spills, dried in mud and so on from carpets; we have small kids, so the carpets usually have a mixture of chocolate, milk, crayola color, mud, dirt, squashed blueberries, and all kinds of other things in them after a while. This all is not a problem for the Bissell to remove completely a job normally done in our house by professional carpet cleaners (quite) regularly.

That's it. Nothing more positive everything else about this thing sucks.

I am only listing the most major annoyances, design flaws, and handling problems here I already spent way too much time on this thing to write about every little detail that generates hassle and frustration ...

First and foremost, after cleaning the carpet, you need to clean the Bissell for which you basically have to disassemble the whole unit, to get the dirt out of all the numerous nooks and crannies. And some of those are virtually inaccessible, so you spend easily twice the time trying to remove the dirt from the Bissell than it took this thing to remove if from your carpet.

Then, it runs through the cleaning solution like there was no bottom to the tank. This will get very expensive, if you plan to clean more than the occasional spill with it.

Then there is the issue with filling the water tank it has a very narrow opening, and since it is so long, it is next to impossible to do that in the sink. So you have have to do that in the bathtub every time.

Then, of course, to clean this thing, you also have to use the bathtub, because it will not fit in the sink. Too bad, that during the cleaning of a regular carpet, so much of the carpet finds its way into the Bissell, in form of clusters of "carpet hair", that it will invariably clog your bathtub when you clean it there. So, better hose it down outside in the garden good luck with that during the winter months.

Furthermore, the much touted Surround Suction functionality is a mere advertising gag it does not add any benefit to the cleaning function, and the same goes for the hand tool, which just does not generate much suction at all.

To sum it up if you are patient enough to accept all the big and little flaws of this Bissell, you will get a machine that effectively cleans even the most hesitant dirt out of the carpet. But I have neither the time nor the inclination to put up with that kind of annoyances I'd rather give the money to a professional cleaning service once in a while and have no hassle with it.

Honest reviews on BISSELL PROheat 2X Pet Deep Cleaning System, Blue Illusion, 9200P

Once I decided to buy a carpet shampooer, I started reading the reviews and saw there were some mixed ones about the Bissell Proheat 2X Pet Deep Cleaning System. Of utmost concern for me was the ability of the shampooer to adequately clean up after my black laborador. Great dog, but an absolute shedding machine!

First time I used the Bissell Pro Heat, it worked like a charm. No problems as some of the other reviews indicated and as expected, I got wads and wads of black dog hair to show for my efforts and a delightfully fresher apartment. For two days. At that point, a completely-out-of-character case of intestinal distress struck the dog and she began leaving the Bissell and me with all kinds of challenges. Over the following week, I had multiple opportunities to use the Bissell and I can safely say the Bissell Pro Heat 2X Pet System continued to come through like a champ; after a couple times taking it apart and putting it back together for cleaning purposes, I'm kind of a champ at that, too, I guess. The only hangup I have had is with the brush assembly which has a two belt system--one large and one small. Never have figured out how to get the small belt back on, but it seems to work on just the larger belt.

I am quite satisfied with this machine; for anyone buying it, just read the directions, read the reviews and work with it a little. (and try not to let the small belt come off.)

Find helpful customer reviews and review ratings for BISSELL PROheat 2X Pet Deep Cleaning System, Blue Illusion, 9200P

We had an old canister-style Bissell steam cleaner and wanted one of the newer upright vacuum-style ones. I choose the Bissell Pro Heat 2x Pet. It's so much easier to use than our old one. You fill up a bladder in a tank. Fill the bladder with hot water and as it cleans, the dirty water goes in the plastic tank around the bladder which contains the clean water. There's a smaller tank in the back that the cleaning solution goes in. Just pull a trigger and the Bissell sprays water and cleaner, the vacuum sucks it back up with the dirt. You can use it either for floor cleaning or through the hand tool to use on upholstery and stairs.

It does a great job! You can see the dirt being sucked up. It's amazing how dirty carpets can be that look relatively clean.

The only downside that I've experienced is that the water and cleaning solution doesn't last very long. I have a small area of carpet to clean and I have to refill the water and cleaning solution once while I clean. It's not hard to do but if you had a lot of carpet to clean, be prepared to refill the tanks at least a couple of times.

The ease of use is very good. Fill your tanks and press your trigger to spray the water/cleaning solution and vacuum like you would with any vacuum. It is much heavier and bulkier to move around than a regular vacuum but it rolls easy and works well.

My carpets are clean and smell fresher so I'm definitely pleased with my purchase.

Buy Fom Amazon Now