Showing posts with label water heater replacement. Show all posts
Showing posts with label water heater replacement. Show all posts
Sunday, November 2, 2014
Reviews of Williams 2303 Blower for Direct-Vent Furnace - 125 CFM
0n and auto switch are backwards. installed in bedroom and i turn it off at night due to loud popping sound when the heat sensor shuts the fan off and wakes me upOrdered this blower from Amazon after much head scratching and confusion on the internet. Even Amazon's photo is misleading as it shows the product as a squirrel cage blower when in fact it's a fan type blower. The order confirmation gave the delivery date as 5-9 days. I was pleasantly surprised to see it on the door step the following day. It was shipped directly from the factory which is about 70 miles from where I live. It's really easy to insatall and operate but I can't say anything about its efficiancy as it's still summertime in So Cal. I've rated it as 4 star because being a fan type blower it's a bit noisier than I'd like it to be. Regardless of the misleading photograph, and all the other misleading photographs on the internet, if you order this from Amazon, you will get the right part.
Friday, October 17, 2014
Fahrenheat PLF504 Hydronic Baseboard Heater, 240-volt Review
Customer Ratings: 
List Price: $145.00
Sale Price: $113.78
Today's Bonus: 22% Off

I was getting some pretty high monthly bills using the standard baseboard heaters with the typical resistant type heating elements. They appeared to be cheaply made, as well.
So, I surveyed my home. Getting the number and correct lengths for the Hydronic baseboard heaters. I had to find other suppliers because Amazon's vendors didn't have all sizes needed.
I used two(2) other suppliers. I have a two(2) floor, two(2)bedroom one(1) bathroom; kitchen/dining room and a finished upstairs den/activity room Cape Cod type house.
This required two(2)\six(6) foot hydronic heaters upstairs; one(1)\two(2) footer by the back kitchen door downstairs with one(1)\five(5)foot hydronic heater against the kitchen's interior wall; one(1)\six(6) footer under the front living-room double window and one(1)\four(4) foot heater under an adjacent window, also, in the living-room; one(1)\two(2) foot hydronic in our full bathroom, which would be considered smaller than the average bathroom by today's standards. One(1)\five(5)foot heater placed under the window in the back bedroom; two(2)\four(4) foot hydronic baseboards were attached under the two(2) adjacent windows in the master-bedroom.
HYDRONIC HEATER TOTALS:(These heaters are all the 240VAC models, using separate wall mounted thermostats.)
LENGTH # of UNITS
6 FT ....... 3
5 FT ....... 1
4 FT ....... 3
2 FT ....... 2
Hydronic ------
Units Total: 9
During the winter months, my electric bills would average over $200.00 apprx.
After installation and a few months use over winter months, the electric bills averaged a little over $100.00.
This was significant enough to bring a smile to my face.
Understand that this reflects only performance within the environment of my home. Different results may vary with other installations.
I would assume, that if the customer is replacing the resistance coil type heaters with the liquid filled hermetically sealed heating elements as seen in these hydronic units, a reduction in electrical power use should result.
I have no doubt, in my opinion, that these hydronic type heating units earn a five star rating.

List Price: $145.00
Sale Price: $113.78
Today's Bonus: 22% Off

I was getting some pretty high monthly bills using the standard baseboard heaters with the typical resistant type heating elements. They appeared to be cheaply made, as well.
So, I surveyed my home. Getting the number and correct lengths for the Hydronic baseboard heaters. I had to find other suppliers because Amazon's vendors didn't have all sizes needed.
I used two(2) other suppliers. I have a two(2) floor, two(2)bedroom one(1) bathroom; kitchen/dining room and a finished upstairs den/activity room Cape Cod type house.
This required two(2)\six(6) foot hydronic heaters upstairs; one(1)\two(2) footer by the back kitchen door downstairs with one(1)\five(5)foot hydronic heater against the kitchen's interior wall; one(1)\six(6) footer under the front living-room double window and one(1)\four(4) foot heater under an adjacent window, also, in the living-room; one(1)\two(2) foot hydronic in our full bathroom, which would be considered smaller than the average bathroom by today's standards. One(1)\five(5)foot heater placed under the window in the back bedroom; two(2)\four(4) foot hydronic baseboards were attached under the two(2) adjacent windows in the master-bedroom.
HYDRONIC HEATER TOTALS:(These heaters are all the 240VAC models, using separate wall mounted thermostats.)
LENGTH # of UNITS
6 FT ....... 3
5 FT ....... 1
4 FT ....... 3
2 FT ....... 2
Hydronic ------
Units Total: 9
During the winter months, my electric bills would average over $200.00 apprx.
After installation and a few months use over winter months, the electric bills averaged a little over $100.00.
This was significant enough to bring a smile to my face.
Understand that this reflects only performance within the environment of my home. Different results may vary with other installations.
I would assume, that if the customer is replacing the resistance coil type heaters with the liquid filled hermetically sealed heating elements as seen in these hydronic units, a reduction in electrical power use should result.
I have no doubt, in my opinion, that these hydronic type heating units earn a five star rating.
Click Here For Most Helpful Customer Reviews >>
We bought this unit more than 5 years ago (cannot remember how long before then) when larger selection of hydronic heaters were available. This unit continues to work, turning our 3/4-season sunroom into a comfortable year-around room. It is very safe, there are no loose parts, the liquid supporting the heating method has not leaked, dripped, etc. Entire unit is solidly built and puts out so much heat that my husband can sweat if he stays in the room too long. A small change in thermostat equates to a large heat output. With 3 dogs running around, this unit has tipped over a few times. Each time, the security feature turned off the unit stopping any potential harm. We are VERY satisfied. For someone who has children playing on the floor, I recommend hieghtened attention or prohibiting the children from playing on the floor in front of the unit unless an adult is with them, because the unit produces a lot of heat in a short period of time, and many children do not recognize or report to an adult the major they feel in temperature. I would be concerned about too much high heat focused onto the child in a focused and short timeframe. The only downside is that you cannot adjust the unit to redirect the airflow, yet this seems to be common with other baseboard heaters I have seen.Best Deals for Fahrenheat PLF504 Hydronic Baseboard Heater, 240-volt
A great product make sure you get a thermostat with it. it never said you needed a thermostat. you doHonest reviews on Fahrenheat PLF504 Hydronic Baseboard Heater, 240-volt
At my contractor's suggeestion, we replaced an old electric baseboard heater with this hydronic one when remodeling our bathroom. As he suggested, this new heater is more efficient, heats up faster and stays warm longer after shutting off than the old one. The "white" is creamier than I'd expected, but the design is so low profile that you hardly notice it. We're thinking of switching all of our electric baseboard heaters to the hydronics.Find helpful customer reviews and review ratings for Fahrenheat PLF504 Hydronic Baseboard Heater, 240-volt
Please provide concise information length,width,height,required wiring to complete installation,precise description of accesories required,so customer does no need to guess or go digging reviews for information.Like you are the customer getting info about the product. Regards, AlexThursday, October 16, 2014
Reviews of Frigidaire FRA126CT1 12-000 Btu Window Air Conditioner W / Temp
Customer Ratings: 
List Price: $439.00
Sale Price: $337.00
Today's Bonus: 23% Off

Update 5/29/13: Member "Coug Moog" in comments to my original review turned me on to the fact that price has drop drastically at some sources on this model all the way down to $298. At that price there's no reason not to grab this more powerful unit over it's 10,000 BTU bretheren. Now that this unit doesn't cost an arm and leg over the 10K, I'll probably never buy another 10K again. I'm also upgrading my review to 4 stars as well. The 12K units I operate have served well. Since they now cost virtually the same as a 10K that's a darn good value.
-----------------------------------------------------------------------------------
Original Review Text Titled "Not the one to buy unless you have a little window" and given 2 stars:
The 12,000 BTU unit is a bad choice for most people. The smaller 10,000 BTU unit is 33% less in cost and typically much more reliable. The bigger 15,000 BTU unit is not that much more than the 12,000 unit.
So why would you pay so much extra above the price of the smaller 10K unit, yet stop short of going all out for the 15,000 BTU unit? Only one reason window height. Beyond 12,000 BTU the case gets much larger, which means it won't fit in some window styles.
Price not important? Measure your window, and if it fits get the bigger 15K unit.
Price important? Then why would you pay so much more for this one over the 10K unit?
I've bought and run this size, but only in special cases where I was restricted by window size and had a really large room to cool.
Also to consider... here's the review I gave on another model that is relevant to this one:
------------------
Between family and rent houses I put all types and sizes to the test every year in the scorching Texas sun. Here's my experience:
If you want a solid window air conditioner, it really boils down to two choices: Frigidaire and LG. The current "sweet spot" on reliability/price/economy is the 10,000 BTU unit regardless of make/manufacturer.
Recently they've been making 12,000 & 15,000 BTU 110V (normal plug) units.
-The 12000 BTU truly is 20% stronger, but you pay 50% more here on Amazon.
-The 15000 BTU is a snowball tossing beast, but it's in a larger case that may not fit your window (height-wise) and doesn't have a long history on the market so we don't know how it will do long-term
LG Pros The 10,000 BTU LG is my "workhorse". Best value. Run them till they fail in 4 to 7 years, then swap `em out for another.
1) Better warranty (but really, who cares when it breaks because you're sitting there sweating)
2) Typically last an additional 2-3 years over other brands
3) An LG rarely just stops running it will degrade slowly over a season
4) They are more tolerant of neglect (e.g. dirty filters... can't rely on tenant to care for your stuff)
5) Better withstands being placed in harsher environments (direct sunlight, restricted airflow)
6) Lower "lemon" rate
Frigidaire Pros For family I prefer to run 12,000 & 15,000 BTU Frigidaires. They are a little nicer, and I consider it worth it even though they always break sooner. (Value and reliability aren't as important, but I do have to compensate by keeping a new boxed spare around because they always fail at the most inopportune moments. Most people can't do this.)
1) A little nicer looking
2) Better features
3) Quieter
4) Slightly easier installation
5) Circuit surge/drain on startup seems significantly less (think lights flickering when compressor comes on)
Other parting thoughts:
1) A thing to know about newer units: To obtain the higher EER (efficiency) ratings, they use finer design on heat exchanger fins. For the non-experts, this means smaller little spaces that get jammed up with dirt/mold/whatever resulting in a clogged/filthy/poorly operating unit much-much faster than your parents' old units. Appliance repair stores can service your window unit every year (clean it of filth) that will extend life by at least 2 years and sometimes much more. Of course this costs anywhere from $50 up, and the units are cheap, so it's your call whether to service or toss it.
2) The 10,000 BTU Frigidaire here on Amazon is a good buy w/Amazon Prime shipping. For other higher BTU models, as of this writing you'll be paying more but also know that right now with the national heatwave most box stores are sold out so you may not have a choice.
3) Something this heavy is a risky ship (versus store pickup). It might be shipped wrong-side-up, or dropped, or whatever. It's a risk you'll run so do so knowingly. (I seem to have pretty good luck w/Amazon shipped items.) The risk is offset, however, by advantages of buying from Amazon (store would take forever, you'd have to load it and bring it home, have to have a vehicle large enough to carry it, etc.)
4) Clean. Your. Filter. Every. Week. It will keep your little ice machine healthy.
5) Different stores have different models from the same maker. If they are made in the same year, it doesn't seem to make a difference.
6) Tempted to go cheap like a Haier? Don't.
7) Tempted to buy a 6,000 or 8,000 BTU model? Don't. Get the stronger unit. It will cool down the room faster. It will not need to work as hard as a weaker unit and last longer. It is built with some stronger/better key components.
Good luck and happy cooling.
And now, back to the original review....
I needed to replace a 10 year old 12,000 BTU Kenmore AC and thoroughly researched my options before zeroing in on this Frigidaire. The clincher was the unique remote control -it has a key feature that no other AC's have, including other Frigidaires.
Thermostat & Automatic Climate Control Built Into The Remote
Let's be clear -most modern AC's come with a remote that turns the temperature up or down, but that's NOT all this Frigidaire's remote does. It actually controls the climate via it's own thermostat and direct communication with the AC itself. The remote also has a digital readout that displays the actual room temperature at the remote itself. This is significant, because most AC's have a thermostat in the AC housing. But this Frigidaire has a thermostat built right into the remote control, which means the AC will cycle on and off based on the temperature at the remote, instead of at the AC unit. I hated how my old Kenmore would click off the compressor because the thermostat thought the room was cool enough, yet where I was sitting, was still hot and muggy. Now, with this new Frigidaire, the compressor keeps running based on the temperature on the remote's digital readout. Every few minutes the remote sends a signal to the AC unit, telling it what the temperature is; and the compressor adjusts, based on that readout, keeping the room a constant, consistent temperature. This feature alone sets this AC apart, head and shoulders above the rest. And after just a few days of using it, there's no way I'd ever want an AC without this feature from here on.
More About the Remote
Other than the awesome feature mentioned above, the remote can turn the AC on or off, set the temperature, timer on, timer off, sleep mode, auto fan and energy saver. It's also a cute little thing that feels good in my hand. It's about the size of a small cell phone and the rubberized buttons are well laid out and easy to use, even for those with poor eyesight and dexterity, like me.
Eco-Friendly
The power surge my old Kenmore caused would literally make the lights dim whenever the compressor kicked in. On really hot days, that sudden power drain would often trip the circuit in my fuse box, knocking the power out. But this new Frigidaire is so energy efficient, that I barely hear the compressor kick in, and the lights dim for just a fraction of a second. So the power drain compared to my old Kenmore is almost nonexistent. I feel confident that when we go through another round of brown-outs here in California, my Frigidaire will keep running even when Edison throttles down everyone's kilowatt usage. Even better, the Electric Company is giving me a rebate for upgrading to a new "green" AC; how COOL is THAT?!
Cooling Powerhouse
There aren't too many 12,000 BTU air conditioners out there; any higher in BTU, and you can't use a standard 3-prong wall outlet. So I was happy to find this 12,000 BTU replacement. This Frigidaire cools my 650 square foot room without a problem. Actually, I have yet to run it higher than Low speed, and at that setting, it's been cooling off the whole room quite quickly, and keeping it at a constant temperature. I know it's early in the season, but it's already gotten hot and muggy here in Southern California, so I've had plenty of opportunity to put this new AC through its paces already. But thus far, I'm quite confident this Frigidaire can more than handle the sweltering heats that are coming.
Clean Air
I have a couple different air purifiers, but it's cool that this AC also has a built-in ionizer. With all the air it blows around the room, it's good to know that I can turn the ionizer on with the push of a button, and minimize the dust flying around. For those of us with respiratory problems, this is a HUGE Bonus!
Installation
If I could find an AC that does all this one can, plus install itself, then it would be the perfect AC! Short of that fantasy, this AC was well worth the setup. I had help with it, and 2 hours later -voila -we were enjoying the reward of cooler air. The unit itself was a little lighter than the Kenmore I was replacing, but let's face it, it's difficult to balance a big, heavy, square object on a windowsill. We got the job done though, with no real headaches or problems. The side louvers were easy to attach, and the screws, brackets and weather stripping were all self-explanatory.
QUIET!
Some other reviews had me concerned about the noise level of this particular unit, but I have to say, this Frigidaire is about as quiet as an AC gets. I have a smaller 5,000 BTU AC in the bedroom, and it's much louder than this 12,000 BTU. My old Kenmore was waaaaaaay louder than this, even when it was brand spanking new.
Bottom Line -Frigidaire really hasn't done themselves any favors by describing and marketing this AC so poorly. They should be punching up what's special about this remote (the built-in thermostat,) how it interacts with the AC, and why that unique feature matters to consumers. It's truly one of a kind and that feature alone squashes the competition in my book. This AC is so much better than it appears, at first glance. Thankfully, I was very thorough in my research, both online and in store, and I doubt you'll find a better AC for the money than this Frigidaire. I fully expect this AC to work flawlessly for years to come; and because I'll have it for many years, I'm glad I took the time to make the right choice.
The repair center diagnosed the noise as a bad bearing in the fan motor. The blower motor was replaced, and the unit is OK now. The motor being bad right out of the box suggests that these units go through no testing at the factory, and quality control is low.
After the repair, the overall noise level is about average which is OK with me. Most of the sound is the air movement swish of the blower. There is very little compressor sound when it is running, and a light "clunk" when the compressor turns off.
This 12,000 BTU unit is the same physical size as the 8,000 BTU Frigidaire unit I am replacing. For what it's worth, the blower in the 8,000 BTU unit lasted two seasons. That might explain why Frigidaire has only a one-year warranty (which is really one season) on that part of the unit. Perhaps Frigidaire is trying to take over Haier's role as the industry purveyor of cheap appliances.
I later found out that LG has a five-year warranty on everything -no need to buy an extended warranty. Frigidaire has five years only on the compressor, one year on everything else. The repair guy at the warranty repair center said he has seen only two LG units in the five years he has been there.
Having gone through multiple window units, I'll offer the advice that, in order to get the high EER ratings, these things (all brands) use delicate fins on the heat exchangers the design and spacing of which easily accumulate micro dust particles in spite of the filter. The moisture on the fins along with the dust encourages the growth of mold if the fins are not meticulously cleaned. But the delicate nature of the fins along with the presence of the electronic controls means you can't do like the old days where you took the thing out of the chassis and washed it out at the local car wash. Cleaning the fins now requires something like using a strong shop vac and a tooth brush to carefully comb fins clean at the end of each season.
In other words: It might have a high EER when you get it new, but it doesn't stay that way for long. It's too bad the EER is only for brand new in the lab, and no thought is given to the EER over a typical lifespan of the product.
Update number two: After the summer season, I can say this with total honesty. Using this unit with my other unit, I saw NO increase in my electric bill. But, and this is a huge BUT, I felt a decrease in the heat in my home. Using two units means twice the power consumption but the on time was reduced dramatically that it actually means you are using less power over all.
==================
==================
Update number one: The remote sensing is, for lack of a better word, a joke.. Yes, it uses IR light to talk to the unit, SO, as long as the remote is pointing directly at the unit and there is nothing obstructing the path between the remote an the unit, then it works fine. BUT, and this is a huge but, in the REAL world this rarely happens. I still give this unit five stars but come on Frigidaire, this is 20th century technology used in a product of the 21st century. Get with the times.
==================
I already have an older version of this model, and was eager to get this one. I'll not bore you with a ten thousand word essay like some feel the need to write, but I will tell you in as few words as possible that this is a good product and why. I got this unit to put in the opposite end of my home so it would take some of the work load off of my older unit, which is still working like a charm.
Size and weight for this BTU amount is good/great. One person can install it but I do recommend two. I'm going on 56 and I was able to install it by myself but don't let my results influence you. Being 115 volts instead of 220 means you don't need an electrician to install wires and an extra circuit breaker. The extra long power cord also eliminates the need for an expensive extension cord.
As far as operation, it's easy. Just put it in an window, plug it in, and turn it on. Remember this though. It is 110 volts and an energy efficient unit, SO, it will NOT produce icicles within thirty minutes of being turned on, BUT it will cool down your room and in a not so slow fashion. Plus, it will not require you to take out a second mortgage to purchase it and also to operate it.
Within an hour of installing this unit, the entire house is cooler and the humidity is MUCH lower. Thus, it is very comfortable now in all parts of my home, and also most of the time now neither unit is running so I think that two units will actually save electricity over running just one. I hope this makes sense. I'm old, and heat doesn't bother me but HIGH humidity does. So, I actually run the window units to be more of a dehumidifier than an actual cooling system. The best part of a window unit is that you get both for the price of one. Just a dehumidifier alone will cost more than a window unit.
As far as sound. This unit is not very loud but let me pass some important information along. If you suffer from hearing loss, as I do, then even the smallest amount of "background" noise will be very distracting and thus, be very annoying. For me, that is not a problem, as it helps me sleep, but while watching TV, you will find that you have increased the volume quite a bit, each time the unit turns off. ;)

List Price: $439.00
Sale Price: $337.00
Today's Bonus: 23% Off

Update 5/29/13: Member "Coug Moog" in comments to my original review turned me on to the fact that price has drop drastically at some sources on this model all the way down to $298. At that price there's no reason not to grab this more powerful unit over it's 10,000 BTU bretheren. Now that this unit doesn't cost an arm and leg over the 10K, I'll probably never buy another 10K again. I'm also upgrading my review to 4 stars as well. The 12K units I operate have served well. Since they now cost virtually the same as a 10K that's a darn good value.
-----------------------------------------------------------------------------------
Original Review Text Titled "Not the one to buy unless you have a little window" and given 2 stars:
The 12,000 BTU unit is a bad choice for most people. The smaller 10,000 BTU unit is 33% less in cost and typically much more reliable. The bigger 15,000 BTU unit is not that much more than the 12,000 unit.
So why would you pay so much extra above the price of the smaller 10K unit, yet stop short of going all out for the 15,000 BTU unit? Only one reason window height. Beyond 12,000 BTU the case gets much larger, which means it won't fit in some window styles.
Price not important? Measure your window, and if it fits get the bigger 15K unit.
Price important? Then why would you pay so much more for this one over the 10K unit?
I've bought and run this size, but only in special cases where I was restricted by window size and had a really large room to cool.
Also to consider... here's the review I gave on another model that is relevant to this one:
------------------
Between family and rent houses I put all types and sizes to the test every year in the scorching Texas sun. Here's my experience:
If you want a solid window air conditioner, it really boils down to two choices: Frigidaire and LG. The current "sweet spot" on reliability/price/economy is the 10,000 BTU unit regardless of make/manufacturer.
Recently they've been making 12,000 & 15,000 BTU 110V (normal plug) units.
-The 12000 BTU truly is 20% stronger, but you pay 50% more here on Amazon.
-The 15000 BTU is a snowball tossing beast, but it's in a larger case that may not fit your window (height-wise) and doesn't have a long history on the market so we don't know how it will do long-term
LG Pros The 10,000 BTU LG is my "workhorse". Best value. Run them till they fail in 4 to 7 years, then swap `em out for another.
1) Better warranty (but really, who cares when it breaks because you're sitting there sweating)
2) Typically last an additional 2-3 years over other brands
3) An LG rarely just stops running it will degrade slowly over a season
4) They are more tolerant of neglect (e.g. dirty filters... can't rely on tenant to care for your stuff)
5) Better withstands being placed in harsher environments (direct sunlight, restricted airflow)
6) Lower "lemon" rate
Frigidaire Pros For family I prefer to run 12,000 & 15,000 BTU Frigidaires. They are a little nicer, and I consider it worth it even though they always break sooner. (Value and reliability aren't as important, but I do have to compensate by keeping a new boxed spare around because they always fail at the most inopportune moments. Most people can't do this.)
1) A little nicer looking
2) Better features
3) Quieter
4) Slightly easier installation
5) Circuit surge/drain on startup seems significantly less (think lights flickering when compressor comes on)
Other parting thoughts:
1) A thing to know about newer units: To obtain the higher EER (efficiency) ratings, they use finer design on heat exchanger fins. For the non-experts, this means smaller little spaces that get jammed up with dirt/mold/whatever resulting in a clogged/filthy/poorly operating unit much-much faster than your parents' old units. Appliance repair stores can service your window unit every year (clean it of filth) that will extend life by at least 2 years and sometimes much more. Of course this costs anywhere from $50 up, and the units are cheap, so it's your call whether to service or toss it.
2) The 10,000 BTU Frigidaire here on Amazon is a good buy w/Amazon Prime shipping. For other higher BTU models, as of this writing you'll be paying more but also know that right now with the national heatwave most box stores are sold out so you may not have a choice.
3) Something this heavy is a risky ship (versus store pickup). It might be shipped wrong-side-up, or dropped, or whatever. It's a risk you'll run so do so knowingly. (I seem to have pretty good luck w/Amazon shipped items.) The risk is offset, however, by advantages of buying from Amazon (store would take forever, you'd have to load it and bring it home, have to have a vehicle large enough to carry it, etc.)
4) Clean. Your. Filter. Every. Week. It will keep your little ice machine healthy.
5) Different stores have different models from the same maker. If they are made in the same year, it doesn't seem to make a difference.
6) Tempted to go cheap like a Haier? Don't.
7) Tempted to buy a 6,000 or 8,000 BTU model? Don't. Get the stronger unit. It will cool down the room faster. It will not need to work as hard as a weaker unit and last longer. It is built with some stronger/better key components.
Good luck and happy cooling.
Click Here For Most Helpful Customer Reviews >>
UPDATE We've had this AC for 2 years now and are still loving it. No problems whatsoever. Still cools like a champ, and we use ours a lot. This year, we even used it through the winter, during those uncharacteristic HOT winter days. Still love the thermostat remote too. Very happy we took the time to hunt down this specific model.And now, back to the original review....
I needed to replace a 10 year old 12,000 BTU Kenmore AC and thoroughly researched my options before zeroing in on this Frigidaire. The clincher was the unique remote control -it has a key feature that no other AC's have, including other Frigidaires.
Thermostat & Automatic Climate Control Built Into The Remote
Let's be clear -most modern AC's come with a remote that turns the temperature up or down, but that's NOT all this Frigidaire's remote does. It actually controls the climate via it's own thermostat and direct communication with the AC itself. The remote also has a digital readout that displays the actual room temperature at the remote itself. This is significant, because most AC's have a thermostat in the AC housing. But this Frigidaire has a thermostat built right into the remote control, which means the AC will cycle on and off based on the temperature at the remote, instead of at the AC unit. I hated how my old Kenmore would click off the compressor because the thermostat thought the room was cool enough, yet where I was sitting, was still hot and muggy. Now, with this new Frigidaire, the compressor keeps running based on the temperature on the remote's digital readout. Every few minutes the remote sends a signal to the AC unit, telling it what the temperature is; and the compressor adjusts, based on that readout, keeping the room a constant, consistent temperature. This feature alone sets this AC apart, head and shoulders above the rest. And after just a few days of using it, there's no way I'd ever want an AC without this feature from here on.
More About the Remote
Other than the awesome feature mentioned above, the remote can turn the AC on or off, set the temperature, timer on, timer off, sleep mode, auto fan and energy saver. It's also a cute little thing that feels good in my hand. It's about the size of a small cell phone and the rubberized buttons are well laid out and easy to use, even for those with poor eyesight and dexterity, like me.
Eco-Friendly
The power surge my old Kenmore caused would literally make the lights dim whenever the compressor kicked in. On really hot days, that sudden power drain would often trip the circuit in my fuse box, knocking the power out. But this new Frigidaire is so energy efficient, that I barely hear the compressor kick in, and the lights dim for just a fraction of a second. So the power drain compared to my old Kenmore is almost nonexistent. I feel confident that when we go through another round of brown-outs here in California, my Frigidaire will keep running even when Edison throttles down everyone's kilowatt usage. Even better, the Electric Company is giving me a rebate for upgrading to a new "green" AC; how COOL is THAT?!
Cooling Powerhouse
There aren't too many 12,000 BTU air conditioners out there; any higher in BTU, and you can't use a standard 3-prong wall outlet. So I was happy to find this 12,000 BTU replacement. This Frigidaire cools my 650 square foot room without a problem. Actually, I have yet to run it higher than Low speed, and at that setting, it's been cooling off the whole room quite quickly, and keeping it at a constant temperature. I know it's early in the season, but it's already gotten hot and muggy here in Southern California, so I've had plenty of opportunity to put this new AC through its paces already. But thus far, I'm quite confident this Frigidaire can more than handle the sweltering heats that are coming.
Clean Air
I have a couple different air purifiers, but it's cool that this AC also has a built-in ionizer. With all the air it blows around the room, it's good to know that I can turn the ionizer on with the push of a button, and minimize the dust flying around. For those of us with respiratory problems, this is a HUGE Bonus!
Installation
If I could find an AC that does all this one can, plus install itself, then it would be the perfect AC! Short of that fantasy, this AC was well worth the setup. I had help with it, and 2 hours later -voila -we were enjoying the reward of cooler air. The unit itself was a little lighter than the Kenmore I was replacing, but let's face it, it's difficult to balance a big, heavy, square object on a windowsill. We got the job done though, with no real headaches or problems. The side louvers were easy to attach, and the screws, brackets and weather stripping were all self-explanatory.
QUIET!
Some other reviews had me concerned about the noise level of this particular unit, but I have to say, this Frigidaire is about as quiet as an AC gets. I have a smaller 5,000 BTU AC in the bedroom, and it's much louder than this 12,000 BTU. My old Kenmore was waaaaaaay louder than this, even when it was brand spanking new.
Bottom Line -Frigidaire really hasn't done themselves any favors by describing and marketing this AC so poorly. They should be punching up what's special about this remote (the built-in thermostat,) how it interacts with the AC, and why that unique feature matters to consumers. It's truly one of a kind and that feature alone squashes the competition in my book. This AC is so much better than it appears, at first glance. Thankfully, I was very thorough in my research, both online and in store, and I doubt you'll find a better AC for the money than this Frigidaire. I fully expect this AC to work flawlessly for years to come; and because I'll have it for many years, I'm glad I took the time to make the right choice.
Best Deals for Frigidaire FRA126CT1 12-000 Btu Window Air Conditioner W / Temp
New unit was very noisy. Rather than return it, it was easier to it take to a local warranty repair center. I kept Amazon in the loop just in case, and they were gracious in offering to exchange the unit if I chose not to have it repaired.The repair center diagnosed the noise as a bad bearing in the fan motor. The blower motor was replaced, and the unit is OK now. The motor being bad right out of the box suggests that these units go through no testing at the factory, and quality control is low.
After the repair, the overall noise level is about average which is OK with me. Most of the sound is the air movement swish of the blower. There is very little compressor sound when it is running, and a light "clunk" when the compressor turns off.
This 12,000 BTU unit is the same physical size as the 8,000 BTU Frigidaire unit I am replacing. For what it's worth, the blower in the 8,000 BTU unit lasted two seasons. That might explain why Frigidaire has only a one-year warranty (which is really one season) on that part of the unit. Perhaps Frigidaire is trying to take over Haier's role as the industry purveyor of cheap appliances.
I later found out that LG has a five-year warranty on everything -no need to buy an extended warranty. Frigidaire has five years only on the compressor, one year on everything else. The repair guy at the warranty repair center said he has seen only two LG units in the five years he has been there.
Having gone through multiple window units, I'll offer the advice that, in order to get the high EER ratings, these things (all brands) use delicate fins on the heat exchangers the design and spacing of which easily accumulate micro dust particles in spite of the filter. The moisture on the fins along with the dust encourages the growth of mold if the fins are not meticulously cleaned. But the delicate nature of the fins along with the presence of the electronic controls means you can't do like the old days where you took the thing out of the chassis and washed it out at the local car wash. Cleaning the fins now requires something like using a strong shop vac and a tooth brush to carefully comb fins clean at the end of each season.
In other words: It might have a high EER when you get it new, but it doesn't stay that way for long. It's too bad the EER is only for brand new in the lab, and no thought is given to the EER over a typical lifespan of the product.
Honest reviews on Frigidaire FRA126CT1 12-000 Btu Window Air Conditioner W / Temp
==================Update number two: After the summer season, I can say this with total honesty. Using this unit with my other unit, I saw NO increase in my electric bill. But, and this is a huge BUT, I felt a decrease in the heat in my home. Using two units means twice the power consumption but the on time was reduced dramatically that it actually means you are using less power over all.
==================
==================
Update number one: The remote sensing is, for lack of a better word, a joke.. Yes, it uses IR light to talk to the unit, SO, as long as the remote is pointing directly at the unit and there is nothing obstructing the path between the remote an the unit, then it works fine. BUT, and this is a huge but, in the REAL world this rarely happens. I still give this unit five stars but come on Frigidaire, this is 20th century technology used in a product of the 21st century. Get with the times.
==================
I already have an older version of this model, and was eager to get this one. I'll not bore you with a ten thousand word essay like some feel the need to write, but I will tell you in as few words as possible that this is a good product and why. I got this unit to put in the opposite end of my home so it would take some of the work load off of my older unit, which is still working like a charm.
Size and weight for this BTU amount is good/great. One person can install it but I do recommend two. I'm going on 56 and I was able to install it by myself but don't let my results influence you. Being 115 volts instead of 220 means you don't need an electrician to install wires and an extra circuit breaker. The extra long power cord also eliminates the need for an expensive extension cord.
As far as operation, it's easy. Just put it in an window, plug it in, and turn it on. Remember this though. It is 110 volts and an energy efficient unit, SO, it will NOT produce icicles within thirty minutes of being turned on, BUT it will cool down your room and in a not so slow fashion. Plus, it will not require you to take out a second mortgage to purchase it and also to operate it.
Within an hour of installing this unit, the entire house is cooler and the humidity is MUCH lower. Thus, it is very comfortable now in all parts of my home, and also most of the time now neither unit is running so I think that two units will actually save electricity over running just one. I hope this makes sense. I'm old, and heat doesn't bother me but HIGH humidity does. So, I actually run the window units to be more of a dehumidifier than an actual cooling system. The best part of a window unit is that you get both for the price of one. Just a dehumidifier alone will cost more than a window unit.
As far as sound. This unit is not very loud but let me pass some important information along. If you suffer from hearing loss, as I do, then even the smallest amount of "background" noise will be very distracting and thus, be very annoying. For me, that is not a problem, as it helps me sleep, but while watching TV, you will find that you have increased the volume quite a bit, each time the unit turns off. ;)
Find helpful customer reviews and review ratings for Frigidaire FRA126CT1 12-000 Btu Window Air Conditioner W / Temp
I have recently received this product. Installed it in my bedroom facing down the hallway. When i come in at night after work, I walk into a cool house from just this one a/c unit working. I have over 1800 sq ft. and this a/c unit does a fantastic job of cooling this area. I love the timer and sleep timer. The remote is a bonus. Was an easy install. Just myself and a neighbor. A little loud when you turn up the fan all the way but not to bad. Overall, I would recommend this to anyone looking for a new a/c unit.Monday, October 6, 2014
Discount Istorm High Speed Automatic Hand Dryer Voltage Type: 110/120
Customer Ratings: 
List Price: $1,900.00
Sale Price: $879.99
Today's Bonus: 54% Off

I bought the iStorm hand dryer two month ago and I love it! I was using paper towels for my restaurant before but after reading some articles about how hand dryers can save a lot of money, I decided to give it a try. Unlike the other hand dryers, iStorm dries hand fast enough and really does keep the floor dry! The ceramic pad works perfectly! And I also have customers compliment on it's interesting smooth round shape. It is a great investment! I am glad that I switched from paper towel to it!

List Price: $1,900.00
Sale Price: $879.99
Today's Bonus: 54% Off

I bought the iStorm hand dryer two month ago and I love it! I was using paper towels for my restaurant before but after reading some articles about how hand dryers can save a lot of money, I decided to give it a try. Unlike the other hand dryers, iStorm dries hand fast enough and really does keep the floor dry! The ceramic pad works perfectly! And I also have customers compliment on it's interesting smooth round shape. It is a great investment! I am glad that I switched from paper towel to it!
Monday, September 29, 2014
Review of KRUPS FL700D50 Electric Kettle with Incorporated Tea Infuser
Customer Ratings: 
List Price: $156.00
Sale Price: $89.99
Today's Bonus: 42% Off

Krups has done a great job with this tea kettle! This item makes a perfect cup of tea! I was not so sure about purchasing it since it is a new item and hadn't been reviewed before. It arrived in just two days and I used it immediately. It is very simple to use. So simple that you wonder why it cost $100. But really, that's a good thing. You are definitely paying for the quality and it is very well constructed. I wasn't sure if the infuser basket was glass or plastic. Turned out it is plastic. The directions talked about a plastic taste that you may experience at first use, but I heated and disposed of two kettles of water with the infuser lowered prior to actually brewing tea and I experienced no plastic taste at all. I would hope that Krups would have made the infuser BPA free, but I can't find any evidence either way. The water heats quickly and the multi-temperature function is great for brewing various types of teas. Also, once you brew, the pour spout has a fine mesh screen that will prevent any loose tea debris from escaping into your tea cup. I brew a lot of rooibos tea which is very fine and some of the tea does escape the infuser. The other good thing is that it has a double infuser (a basket that the actual infuser sits in) which allows you to place other items that can use a longer brewing time into the basket prior to lowering the tea infuser. For me, I like to add a little fresh ginger into the basket. Clean up is very easy as well. Only thing is, I would have loved to see some intermediate measurements on the carafe in addition to the max fill line. All in all I've been enjoying this product and would definitely recommend it. It's all a tea lover would ever need to brew a great cup of tea!
Works great.. only thing that could make it better is a noise to let you know its done heating up.
The Breville model similar to this one has a feature where you can heat in 5 deg increments and a timer to start boiling water for people who want their tea before work etc...and i believe this informs you when its done heating.. but for $230 for the Breville model the Krups is a cheaper alternative.
Now for the reason it is not a five star.
the heat settings listed don't match my 2 test thermometers. I wanted a 165 setting that the product doesn't have.
I found that mine actually has one, because all the settings except boil are about 10 degrees lower than the listed temperature, so if i want 165 degree, i set it at 175 and so on.
so, for me it works, just, if you get this product check the temperatures.
Just so you know, i purchased this about a week ago. I do use it about 4 or 5 times a day
april first 2013 and still working well
Very attractive and functional kettle. I especially like the hold temperature setting that keeps the water at the selected temp for an hour great for grabbing that last-minute coffee before heading out the door in the morning. The glass kettle is sturdy and the spout pours well.
Cons:
The base unit quit working after less than six months. Luckily I had registered the product with Krups and they were able to look up my purchase and issue an RMA over the phone without a receipt. They also sent me a pre-paid shipping label to send the kettle to a local authorized repair station. I'm sending it out today for repair/replacement. Hopefully this malfunction is random and not indicative of a design flaw.
UPDATE:
After owning this kettle for six months (including the month or so it was being repaired) the joint where the plastic spout attaches to the glass has begun to leak, which results in a teaspoon of water dribbling onto the counter each time I pour a cup. I hesitate to send it back in for repair because it is twice as fast compared to heating water in the microwave. I will post an update about my experience with customer service in the event I do decide to send it in for repair again!

List Price: $156.00
Sale Price: $89.99
Today's Bonus: 42% Off

Krups has done a great job with this tea kettle! This item makes a perfect cup of tea! I was not so sure about purchasing it since it is a new item and hadn't been reviewed before. It arrived in just two days and I used it immediately. It is very simple to use. So simple that you wonder why it cost $100. But really, that's a good thing. You are definitely paying for the quality and it is very well constructed. I wasn't sure if the infuser basket was glass or plastic. Turned out it is plastic. The directions talked about a plastic taste that you may experience at first use, but I heated and disposed of two kettles of water with the infuser lowered prior to actually brewing tea and I experienced no plastic taste at all. I would hope that Krups would have made the infuser BPA free, but I can't find any evidence either way. The water heats quickly and the multi-temperature function is great for brewing various types of teas. Also, once you brew, the pour spout has a fine mesh screen that will prevent any loose tea debris from escaping into your tea cup. I brew a lot of rooibos tea which is very fine and some of the tea does escape the infuser. The other good thing is that it has a double infuser (a basket that the actual infuser sits in) which allows you to place other items that can use a longer brewing time into the basket prior to lowering the tea infuser. For me, I like to add a little fresh ginger into the basket. Clean up is very easy as well. Only thing is, I would have loved to see some intermediate measurements on the carafe in addition to the max fill line. All in all I've been enjoying this product and would definitely recommend it. It's all a tea lover would ever need to brew a great cup of tea!
Click Here For Most Helpful Customer Reviews >>
I emailed Krups and they said that the plastic infuser for this product is BPA free, but i do wish it was glass or metal instead.Works great.. only thing that could make it better is a noise to let you know its done heating up.
The Breville model similar to this one has a feature where you can heat in 5 deg increments and a timer to start boiling water for people who want their tea before work etc...and i believe this informs you when its done heating.. but for $230 for the Breville model the Krups is a cheaper alternative.
Best Deals for KRUPS FL700D50 Electric Kettle with Incorporated Tea Infuser
The tea kettle works great. I don't use the infuser, though i tried it once and it worked fine. i use it as a water heater with different heat settings.Now for the reason it is not a five star.
the heat settings listed don't match my 2 test thermometers. I wanted a 165 setting that the product doesn't have.
I found that mine actually has one, because all the settings except boil are about 10 degrees lower than the listed temperature, so if i want 165 degree, i set it at 175 and so on.
so, for me it works, just, if you get this product check the temperatures.
Just so you know, i purchased this about a week ago. I do use it about 4 or 5 times a day
april first 2013 and still working well
Honest reviews on KRUPS FL700D50 Electric Kettle with Incorporated Tea Infuser
Pros:Very attractive and functional kettle. I especially like the hold temperature setting that keeps the water at the selected temp for an hour great for grabbing that last-minute coffee before heading out the door in the morning. The glass kettle is sturdy and the spout pours well.
Cons:
The base unit quit working after less than six months. Luckily I had registered the product with Krups and they were able to look up my purchase and issue an RMA over the phone without a receipt. They also sent me a pre-paid shipping label to send the kettle to a local authorized repair station. I'm sending it out today for repair/replacement. Hopefully this malfunction is random and not indicative of a design flaw.
UPDATE:
After owning this kettle for six months (including the month or so it was being repaired) the joint where the plastic spout attaches to the glass has begun to leak, which results in a teaspoon of water dribbling onto the counter each time I pour a cup. I hesitate to send it back in for repair because it is twice as fast compared to heating water in the microwave. I will post an update about my experience with customer service in the event I do decide to send it in for repair again!
Find helpful customer reviews and review ratings for KRUPS FL700D50 Electric Kettle with Incorporated Tea Infuser
I had high hopes for this kettle and it certainly delivered! It boils water very quickly. It isn't heavy like I expected (since it's glass) even when it's full. I don't plan to use the tea basket since it's plastic, but it is also very well done. My only complaint is the tiny bit of silicone in the bottom of the kettle, but considering i was using a completely plastic kettle before, this is a major improvement! Having multiple settings for different types of tea is very cool, but i can't say i use it as much as i expected to. It's still nice to have the option though. Love this kettle and highly recommend it!Tuesday, September 23, 2014
Discount Sunpentown NY-636 3-4/5-Liter Chinese Herbal Medicine Cooker
Customer Ratings: 
List Price: $78.00
Sale Price: $50.99
Today's Bonus: 35% Off

I've been using this to cook Chinese Herbal Medicine for a few months now. I used to use a ceramic pot to cook the medicine. This unit is much easier to cook. You plug and let it do its job. The ceramic pot is easier to clean and costs $5.99. This unit you cannot put into a dishwasher due to electronic components being part of the unit. One time I was rinsing the unit trying to clean it and the water got onto the base and the unit stop working for 24 hours ... until it was dry again. Normally this does not happen if you clean it carefully.
This unit works by cooking the medicine until the water level drops to a certain point. Then it switches to warm mode. This often takes 1.5 to 2 hours for the medicine I cook. However the herbalist whom I get my medicine from says to cook it only for 30 minutes after it boils and not to exceed 40 minutes. Well since he is an OMD, and a former professor of the Beijing College of Traditional Chinese Medicine, I'll take his word for it. I have to use kitchen timer and then un-plug this unit after 45 minutes (15 minutes before it boils + 30 minutes of boil).
1) overall it's well made and looks nice (nice thick glaze over the ceramic with some cute calligraphy on the front).
2) there is very little circuitry inside so there is less to fail but at the same time the unit is "dumb". It will just keep boiling until the water level drops enough to expose the top of the stainless steel heater element (which rises about maybe 1-2 inches from the bottom) then will switch to keep warm. After boiling it seems you are left with around 2 cups of liquid.
3) much easier to deal with (IMHO) than boiling herbs in a ceramic double-lid "ginseng cooker". Just plug in and let it go (after adding your pre-washed herbs and water, of course).
4) it is not suited for aromatic herbs or herbs with high volatile oil content as steam escapes through both the pouring spout (which I covered with a small piece of tin foil until I find something better to use) and a small hole (perhaps around .5 cm) on the lid. Actually covering the spout may just make it take longer to cook as the liquid would evaporate slower...
5) as previous poster mentioned, you need a kitchen/electric timer! You can't manually switch to keep warm (with a button or switch, etc) you need to remove/stop the power. The little front lights are indicators only, not switches or button. Some herbs/formulas you just can't let cook like the cooker is meant to, however most you probably can if you balance the water and herbs correctly, and know what your doing. Ask your TCM doctor, which I am not (yet). Also consult a good Materia Medica for herbs in question. With a timer this could also be used for other (related) purposed liked Chinese Medicated Diet therapies, etc, but a hot pot may work better in many cases that require very slow cooking.
Other notes: as it says in the manual, once the heat has switched to keep warm don't let your tea sit for more than 2 hours as the herbs may soak up some of the active ingredients you just decocted as they dry.
One last thing, it does come with a 1-year warranty (or so the company claims), so keep your receipt and box. While it is made in China, it's distributor is in CA (so no you won't have to ship to China for warranty issues).
All that aside, get one... they look cool :D

List Price: $78.00
Sale Price: $50.99
Today's Bonus: 35% Off

I've been using this to cook Chinese Herbal Medicine for a few months now. I used to use a ceramic pot to cook the medicine. This unit is much easier to cook. You plug and let it do its job. The ceramic pot is easier to clean and costs $5.99. This unit you cannot put into a dishwasher due to electronic components being part of the unit. One time I was rinsing the unit trying to clean it and the water got onto the base and the unit stop working for 24 hours ... until it was dry again. Normally this does not happen if you clean it carefully.
This unit works by cooking the medicine until the water level drops to a certain point. Then it switches to warm mode. This often takes 1.5 to 2 hours for the medicine I cook. However the herbalist whom I get my medicine from says to cook it only for 30 minutes after it boils and not to exceed 40 minutes. Well since he is an OMD, and a former professor of the Beijing College of Traditional Chinese Medicine, I'll take his word for it. I have to use kitchen timer and then un-plug this unit after 45 minutes (15 minutes before it boils + 30 minutes of boil).
Click Here For Most Helpful Customer Reviews >>
I just got one of these at a local herb store (mine is the Chinese model ss-3040 but is exactly the same thing as the NY636). After using it once I can tell several things right away:1) overall it's well made and looks nice (nice thick glaze over the ceramic with some cute calligraphy on the front).
2) there is very little circuitry inside so there is less to fail but at the same time the unit is "dumb". It will just keep boiling until the water level drops enough to expose the top of the stainless steel heater element (which rises about maybe 1-2 inches from the bottom) then will switch to keep warm. After boiling it seems you are left with around 2 cups of liquid.
3) much easier to deal with (IMHO) than boiling herbs in a ceramic double-lid "ginseng cooker". Just plug in and let it go (after adding your pre-washed herbs and water, of course).
4) it is not suited for aromatic herbs or herbs with high volatile oil content as steam escapes through both the pouring spout (which I covered with a small piece of tin foil until I find something better to use) and a small hole (perhaps around .5 cm) on the lid. Actually covering the spout may just make it take longer to cook as the liquid would evaporate slower...
5) as previous poster mentioned, you need a kitchen/electric timer! You can't manually switch to keep warm (with a button or switch, etc) you need to remove/stop the power. The little front lights are indicators only, not switches or button. Some herbs/formulas you just can't let cook like the cooker is meant to, however most you probably can if you balance the water and herbs correctly, and know what your doing. Ask your TCM doctor, which I am not (yet). Also consult a good Materia Medica for herbs in question. With a timer this could also be used for other (related) purposed liked Chinese Medicated Diet therapies, etc, but a hot pot may work better in many cases that require very slow cooking.
Other notes: as it says in the manual, once the heat has switched to keep warm don't let your tea sit for more than 2 hours as the herbs may soak up some of the active ingredients you just decocted as they dry.
One last thing, it does come with a 1-year warranty (or so the company claims), so keep your receipt and box. While it is made in China, it's distributor is in CA (so no you won't have to ship to China for warranty issues).
All that aside, get one... they look cool :D
Best Deals for Sunpentown NY-636 3-4/5-Liter Chinese Herbal Medicine Cooker
It works great, heats fast and looks very nice on my counter. I agree with the other reviewer, unplug it after 45 minutes (15 minutes to heat-up, 30 minutes to boil...) More than 30 minutes can diminsh the efficacy of some ingredients. When in doubt, ask your pharmacist!Honest reviews on Sunpentown NY-636 3-4/5-Liter Chinese Herbal Medicine Cooker
Chinese herbs are suppose to be cooked in a clay pot and the herb should not come in contact with any metalic surface. This unit is made of Porcelain and has an exposed stainless steel cooking element cover inside which the herbs would sit on. But it does look nice.Sunpentown SS-0340 3-2/5-Liter Chinese Herbal Medicine Cooker with Stainless HeaterFind helpful customer reviews and review ratings for Sunpentown NY-636 3-4/5-Liter Chinese Herbal Medicine Cooker
I am told to put in 4 cups of water with my herbs and then when it is done and both lights are on, it should have cooked it down to be 1 cup. However, it has never has given me 1 cup. It used to give me 3/4 cup but now it just gives me a 1/2 cup so it is cooking it longer each time. (I have now read the other reviews and see I have to unplug it versus trust it to do what it is supposed to do.) The other issue is that now it needs 24 hours to "cool" before I can reuse it as when I plug it back in, both lights stay on and it won't go into cook mode. It therefore doesn't work properly. I have probably only used it 8 times so I am really disappointed with the quality.Wednesday, August 27, 2014
Review of Great Northern Popcorn Red 4 oz. Ounce Foundation Old-Fashioned
Customer Ratings: 
List Price: $469.95
Sale Price: $213.86
Today's Bonus: 54% Off

My family loves making popcorn and this is the perfect addition to our basement entertainment area. Very happy with the quality and we use it all the time.

List Price: $469.95
Sale Price: $213.86
Today's Bonus: 54% Off

My family loves making popcorn and this is the perfect addition to our basement entertainment area. Very happy with the quality and we use it all the time.
Click Here For Most Helpful Customer Reviews >>
I was very happy with this machine, tough I was not happy that there were a couple scratches and dings in it when I received it. Easy to put together and works very well.Shipping was very fastBest Deals for Great Northern Popcorn Red 4 oz. Ounce Foundation Old-Fashioned
Product was not as described on Amazon. Product specification said product included a warming deck. When it arrived one was not included. Contacted seller who stated that warming deck was only on 6oz and 8oz models. After much back and forth conversation, they finally agreed to replace it with one that has a warming deck. The replacement unit is either used or refurbished.Friday, March 14, 2014
Review of The Sharper Image Select-A-Temp 1.7L Stainless Steel Cordless
Customer Ratings: 
List Price: $99.99
Sale Price: $56.99
Today's Bonus: 43% Off

Customer review from the Amazon Vine Program I've had a Breville BKE820XL Variable-Temperature Kettle for over a year now. Its brilliant design has made it my favorite appliance, a pleasure to use every time I make a cup of tea. So when I got the chance to try out the Sharper Image Select-A-Temp, I thought I'd take the opportunity to compare the two. Here's a breakdown:
Interface: With the Breville, you hit one of five temperature buttons (from Green Tea up to Boiling), then hit start. The button lights up, and you can tell even from across the room what state the kettle is in--is it heating up? Has it finished? If so, is the water still hot enough? It also provides audible feedback, beeps that are loud enough to hear from the next room but not so loud as to be irritating. The Sharper Image uses a small digital display on the handle. A blinking icon tells you that the kettle is boiling. There is no audible feedback beyond the water itself. There's no indication of what the current temperature of the water is.
Features: Both have a "hold temp" feature for when you want to keep the water at the temperature you heated it to, though the Breville's way of doing this is much more intuitive. The Sharper Image also offers an "overboil" feature that makes it keep going for a few minutes after hitting 212°, and you can heat water at any 10-degree interval from 110° up to 212° (the Breville's minimum is 175° for green tea). The lower temperatures might be useful for, say, making hot cocoa for small children.
Details: The Breville has a large lid that opens fully and smoothly at the press of a button located within thumb's reach of the handle, making refilling a breeze. The Sharper Image has a smaller lid with a release button on it, which feels clumsy; worse, it opens at an angle, so refilling the kettle in a sink requires you to keep the kettle tilted.
Looks: Comparable. Both fit well in a modern kitchen, with their abundance of stainless steel. Both have roughly the same footprint. The only cheap-looking part of the Sharper Image kettle is the oversized handle with its awkward buttons.
Performance: Comparable. In my stopwatch test, both took about 4:45 to boil 1L of water.
Warranty: Comparable. Both come with 1 year of coverage.
Price: The one area where the Sharper Image kettle has an advantage, at half the price of the Breville. You get what you pay for.
In short, what we have here are two kettles which both do the same thing (heat water to various temperatures, quickly); but while one is a paragon is appliance design, the other feels clunky and dated. One takes two easy button presses to heat water to the desired temperature; the other can take several. One provides pleasant audible and visual feedback when it's done; the other just stops. Yes, the Breville is more expensive, but if you plan on using it every day, then it's worth every penny.
My quibbles then don't have to do with the practicality but with its aesthetics. The handle is a bit chunky. Maybe it's that I have small hands but I find it a bit awkward to pick it up when it's full. Also, it doesn't keep water hot for as long as some of its competitors. (Unless of course you use the Warm Keeping Mode but that rather defeats the energy saving point.) The digital display also makes it somewhat hard to see when the kettle is on.
All in all, I would say this is a great kettle for someone who is very practical or very particular about their tea. Obviously it would be ideal for someone who is both! It may not be the right kettle for someone who prizes elegance above all in her kitchen though.
Personally, I quite like it and recommend it.
First the speed test: I measured 32 oz of cold tapwater into each. I ran them consecutively using the same electrical outlet: Braun 4:58; Sharper Image 5:30, Saeco 5:00. For serial tea-making (us Brits have to work harder at assembling our daily caffeine dose), the Saeco is my favourite because it will keep water warm for two hours, compared to 30 min for the Sharper Image. Is that environmentally bad? Not if it's heating season, when any source of heat inside the house is about as green as any other except for wood or solar.
[Note: For longevity of the unit, I recommend always boiling slightly more water than you need. If you completely empty an only-just-boiled kettle, the heating element, though turned off, will continue to heat the kettle well past boiling, and perhaps past the design limits of the various plastics.]
The temperature-holding function works well, holding temperature close to desired. The Saeco temperature-holding function is simpler to use, but the Sharper Image is more fine-grained, offering 10F increments.
All three are difficult to fill because the lids don't open far enough, for no obvious reason at all. The Sharper Image loses a star because it has no indicator light and is purely right-handed, with the fill window only on the left side. That is annoying even if you are right-handed.
It loses another star for now because the fit and finish are slightly shoddy, with visible manufacturing gouges and irregularities, and the injection-moulded plastic looks like something from the pre-CAD 1970s, with a marred surface showing visible weld lines, cavities, and flash-marks (Sharper Image! Google 'finite-element-analysis software'). It may lose another star over time because the poor finish doesn't speak well to long-term reliability.
For now, though, it's just my least favourite of the three.
Since then, electric kettles have become much more popular here and there are many sizes and types available. I've tried many and have been left disappointed, but finally found the Adagio UtiliTEA kettle with variable temperature, which I'll use to compare the Sharper Image kettle. Temperature control is important to me because green tea and black tea or coffee require different temperatures for optimum flavor. I've used and loved this kettle for a few years.
Now I've tried the Sharper Image kettle and I'm impressed! It's larger than my Adagio and offers multiple functions. My Adagio holds 30oz of water, while the Sharper Image kettle holds 57oz. Selecting the correct temperature is easy with the arrow buttons. You can push the Function button and choose to keep the water warm, which is helpful and not an option with the Adagio kettle.
I filled both kettles with 3 cups of very cold water and turned them on at the same time, with temps set to 212 degrees. Both came to a boil in almost the same time, with the Adagio reaching boiling point about 15 seconds sooner.
I only have two complaints. I wish there was a red indicator light to let me know it's doing what it should do. The digital indicator isn't lit and can be hard to see without the right lighting. I might not always want to turn the lights on in the wee hours of the morning. I also wish the kettle were entirely stainless steel instead of including some plastic interior parts. Since the manual does not state that the plastic is free of BPA, then it's safe to assume otherwise. I have the same complaint about the Adagio kettle.
I'm happy with the features and performance of this kettle and can definitely recommend it.
I've had the Adagio Teas 3 UtiliTEA Variable-Temperature 30-Ounce Electric Kettle for a few years now and it's done nicely, although it doesn't hold a ton of water and the temperatures can vary.
The Sharper Image one is slickit's got a nice profile, boils water very quickly, and the "programmable" features are nice. But what wins it for me is the fact it keeps the water at temperature for about half an hourI often have two cups of tea in the morning and two in the afternoon and it's so lovely to be able to go into the kitchen and immediately get another cup of tea steeping right after I finish the first without waiting for water to boil again. It's also great for cookingsometimes when we're making risotto or rice or whatever, we boil some water in the kettle just in case we need a little extra for the cooking pot. The fact it keep the water HOT means we can just pour it in when we need it. Makes life so much easier that way.
Now if only someone would make a tea mug (not a warmer...) that keeps the tea piping hot for half an hour....

List Price: $99.99
Sale Price: $56.99
Today's Bonus: 43% Off

Customer review from the Amazon Vine Program I've had a Breville BKE820XL Variable-Temperature Kettle for over a year now. Its brilliant design has made it my favorite appliance, a pleasure to use every time I make a cup of tea. So when I got the chance to try out the Sharper Image Select-A-Temp, I thought I'd take the opportunity to compare the two. Here's a breakdown:
Interface: With the Breville, you hit one of five temperature buttons (from Green Tea up to Boiling), then hit start. The button lights up, and you can tell even from across the room what state the kettle is in--is it heating up? Has it finished? If so, is the water still hot enough? It also provides audible feedback, beeps that are loud enough to hear from the next room but not so loud as to be irritating. The Sharper Image uses a small digital display on the handle. A blinking icon tells you that the kettle is boiling. There is no audible feedback beyond the water itself. There's no indication of what the current temperature of the water is.
Features: Both have a "hold temp" feature for when you want to keep the water at the temperature you heated it to, though the Breville's way of doing this is much more intuitive. The Sharper Image also offers an "overboil" feature that makes it keep going for a few minutes after hitting 212°, and you can heat water at any 10-degree interval from 110° up to 212° (the Breville's minimum is 175° for green tea). The lower temperatures might be useful for, say, making hot cocoa for small children.
Details: The Breville has a large lid that opens fully and smoothly at the press of a button located within thumb's reach of the handle, making refilling a breeze. The Sharper Image has a smaller lid with a release button on it, which feels clumsy; worse, it opens at an angle, so refilling the kettle in a sink requires you to keep the kettle tilted.
Looks: Comparable. Both fit well in a modern kitchen, with their abundance of stainless steel. Both have roughly the same footprint. The only cheap-looking part of the Sharper Image kettle is the oversized handle with its awkward buttons.
Performance: Comparable. In my stopwatch test, both took about 4:45 to boil 1L of water.
Warranty: Comparable. Both come with 1 year of coverage.
Price: The one area where the Sharper Image kettle has an advantage, at half the price of the Breville. You get what you pay for.
In short, what we have here are two kettles which both do the same thing (heat water to various temperatures, quickly); but while one is a paragon is appliance design, the other feels clunky and dated. One takes two easy button presses to heat water to the desired temperature; the other can take several. One provides pleasant audible and visual feedback when it's done; the other just stops. Yes, the Breville is more expensive, but if you plan on using it every day, then it's worth every penny.
Click Here For Most Helpful Customer Reviews >>
Customer review from the Amazon Vine Program This is a high-quality kettle. At 1500 watts it isn't under-powered like too many other kettles out there which means you get so save money because it will heat your water faster. Furthermore, because you can control the temperature of the water (you can set it to boil from anywhere between 110 and 212 degrees Fahrenheit) you can further save money on your electricity bills and/or ensure that the water is boiled just right for the kind of tea you're making. Add to that the fact that the kettle rotates on the power base, that its top opens up, making it easier to clean than many of its competitors makes this a very practical kettle.My quibbles then don't have to do with the practicality but with its aesthetics. The handle is a bit chunky. Maybe it's that I have small hands but I find it a bit awkward to pick it up when it's full. Also, it doesn't keep water hot for as long as some of its competitors. (Unless of course you use the Warm Keeping Mode but that rather defeats the energy saving point.) The digital display also makes it somewhat hard to see when the kettle is on.
All in all, I would say this is a great kettle for someone who is very practical or very particular about their tea. Obviously it would be ideal for someone who is both! It may not be the right kettle for someone who prizes elegance above all in her kitchen though.
Personally, I quite like it and recommend it.
Best Deals for The Sharper Image Select-A-Temp 1.7L Stainless Steel Cordless
Customer review from the Amazon Vine Program I compared this kettle by lining it up with our household's two other electric kettles: my unbreakable workhorse Braun and the amusingly-psychedelic Saeco.First the speed test: I measured 32 oz of cold tapwater into each. I ran them consecutively using the same electrical outlet: Braun 4:58; Sharper Image 5:30, Saeco 5:00. For serial tea-making (us Brits have to work harder at assembling our daily caffeine dose), the Saeco is my favourite because it will keep water warm for two hours, compared to 30 min for the Sharper Image. Is that environmentally bad? Not if it's heating season, when any source of heat inside the house is about as green as any other except for wood or solar.
[Note: For longevity of the unit, I recommend always boiling slightly more water than you need. If you completely empty an only-just-boiled kettle, the heating element, though turned off, will continue to heat the kettle well past boiling, and perhaps past the design limits of the various plastics.]
The temperature-holding function works well, holding temperature close to desired. The Saeco temperature-holding function is simpler to use, but the Sharper Image is more fine-grained, offering 10F increments.
All three are difficult to fill because the lids don't open far enough, for no obvious reason at all. The Sharper Image loses a star because it has no indicator light and is purely right-handed, with the fill window only on the left side. That is annoying even if you are right-handed.
It loses another star for now because the fit and finish are slightly shoddy, with visible manufacturing gouges and irregularities, and the injection-moulded plastic looks like something from the pre-CAD 1970s, with a marred surface showing visible weld lines, cavities, and flash-marks (Sharper Image! Google 'finite-element-analysis software'). It may lose another star over time because the poor finish doesn't speak well to long-term reliability.
For now, though, it's just my least favourite of the three.
Honest reviews on The Sharper Image Select-A-Temp 1.7L Stainless Steel Cordless
Customer review from the Amazon Vine Program I lived in England for a while in the late 90s, and of course England is known for their tea drinkers. I had never used or even seen an electric kettle before, and had only used the old fashioned type you fill with water and put on a stove eye to use. In England, I was told that while most homes owned a television, EVERY home owned a kettle. So I bought one. And it boiled the water in 30 seconds. When I moved back to America, I had to search hard to find an electric kettle. Even Amazon only had one to offer, which I bought, but it couldn't begin to compare to the kettle I used in England. Of course kettles in America take much longer to boil due to the voltage differences, but otherwise the features are just as good.Since then, electric kettles have become much more popular here and there are many sizes and types available. I've tried many and have been left disappointed, but finally found the Adagio UtiliTEA kettle with variable temperature, which I'll use to compare the Sharper Image kettle. Temperature control is important to me because green tea and black tea or coffee require different temperatures for optimum flavor. I've used and loved this kettle for a few years.
Now I've tried the Sharper Image kettle and I'm impressed! It's larger than my Adagio and offers multiple functions. My Adagio holds 30oz of water, while the Sharper Image kettle holds 57oz. Selecting the correct temperature is easy with the arrow buttons. You can push the Function button and choose to keep the water warm, which is helpful and not an option with the Adagio kettle.
I filled both kettles with 3 cups of very cold water and turned them on at the same time, with temps set to 212 degrees. Both came to a boil in almost the same time, with the Adagio reaching boiling point about 15 seconds sooner.
I only have two complaints. I wish there was a red indicator light to let me know it's doing what it should do. The digital indicator isn't lit and can be hard to see without the right lighting. I might not always want to turn the lights on in the wee hours of the morning. I also wish the kettle were entirely stainless steel instead of including some plastic interior parts. Since the manual does not state that the plastic is free of BPA, then it's safe to assume otherwise. I have the same complaint about the Adagio kettle.
I'm happy with the features and performance of this kettle and can definitely recommend it.
Find helpful customer reviews and review ratings for The Sharper Image Select-A-Temp 1.7L Stainless Steel Cordless
Customer review from the Amazon Vine Program I'm an obsessive tea drinker, so an electric kettle is sort of an essential gadget for meit's my version of a coffee maker.I've had the Adagio Teas 3 UtiliTEA Variable-Temperature 30-Ounce Electric Kettle for a few years now and it's done nicely, although it doesn't hold a ton of water and the temperatures can vary.
The Sharper Image one is slickit's got a nice profile, boils water very quickly, and the "programmable" features are nice. But what wins it for me is the fact it keeps the water at temperature for about half an hourI often have two cups of tea in the morning and two in the afternoon and it's so lovely to be able to go into the kitchen and immediately get another cup of tea steeping right after I finish the first without waiting for water to boil again. It's also great for cookingsometimes when we're making risotto or rice or whatever, we boil some water in the kettle just in case we need a little extra for the cooking pot. The fact it keep the water HOT means we can just pour it in when we need it. Makes life so much easier that way.
Now if only someone would make a tea mug (not a warmer...) that keeps the tea piping hot for half an hour....
Monday, February 17, 2014
Reviews of Electrostatic Air Furnace Filter - Silver Metal Frame - Permanent
Customer Ratings: 
List Price: $99.00
Sale Price: Price Unavailable
Today's Bonus: 65% Off

This air filter is well done, the problem is its density that decrease the airflow by good 40%. IF you have a smaller AC system or 2 story house, you will find out soon that this filter does cause much less cold air coming out and may even kill your whole AC system. I am exchanging mine for less dense ask for 82% instead of 95% filter for better air flow.
Haven't washed it yet. The house has less dust and the air smells better. I'm going to add some balsam oil to the corner after I wash it to scent the house for the holidays.

List Price: $99.00
Sale Price: Price Unavailable
Today's Bonus: 65% Off

This air filter is well done, the problem is its density that decrease the airflow by good 40%. IF you have a smaller AC system or 2 story house, you will find out soon that this filter does cause much less cold air coming out and may even kill your whole AC system. I am exchanging mine for less dense ask for 82% instead of 95% filter for better air flow.
Click Here For Most Helpful Customer Reviews >>
I received the filter on time. During shipment, the frame suffered a slight crimp. I straightened it and installed it. The fit is perfect.Haven't washed it yet. The house has less dust and the air smells better. I'm going to add some balsam oil to the corner after I wash it to scent the house for the holidays.
Best Deals for Electrostatic Air Furnace Filter - Silver Metal Frame - Permanent
I chose the "I Like It" rating because it is better than just "OK." But I don't "love it." I would like it better if the MFR used stainless-steel screws to hold it together as in the more-expensive gold model rather than rivets, so I can take it apart easily. I presume it is effective but I have not had it long enough to know. I don't like that there was a long delay before they manufactured it for me considering it is a srtandard size. And it is somewhat expensive.Honest reviews on Electrostatic Air Furnace Filter - Silver Metal Frame - Permanent
I REC'D AS PROMISED & INSTALLED SAME DAY...THE FIT WAS PERFECT AS I ORDER'D & WAS VERY STURDY MADE..WILL NEVER BUY ANY OTHER KIND OF FILTER FOR MY AC RETURN AIR IN MY HOME..Friday, December 6, 2013
Review of Lasko 6462 Full-Circle Warmth Ceramic Ceramic Electric Space Heater
Customer Ratings: 
List Price: $74.99
Sale Price: $59.99
Today's Bonus: 20% Off

I bought this heater based on the features and a good CR review as there were a limited # of reviews on Amazon. One thing I liked about this heater is it puts out heat at approx. 24" off of the floor. I use it in my home office and my two previous Holmes ceramic heaters were very low and would direct the heat into my computer air intake which wasn't very good for me or my computer. Although I really didn't think I needed a remote to change the heat settings, I find it very useful to control the oscillation or temp setting. You can change all settings manually on the front panel if you loose your remote. It seems to throw out much more heat than any of my previous 1500W heaters and easily heats my 16 x 16 ft room in short order. The LED display is well lit and the construction is fairly impressive and sturdy. The fan seems to have much more CFM than your average space heater, but without any real dicernable noise especially when on the phone etc. About the only thing I can complain about is that in the Automatic temperature control mode the unit will only run in the high 1500W mode. If you use the Auto thermostatically controlled feature and it's relatively close to you, it will get a little too warm which is easily resolved by turning the temperature down or putting it in the manual mode on low. I think for this heater to keep you warm, it doesn't really need to be within 5ft as you can place it anywhere in most rooms in the auto mode to keep the whole room temperature constant. For the cost, I don't see how anyone could complain about this heater, but I'm sure someone will! I just ordered a second one for my family room which is much larger, but I feel it will handle it with ease. I would have ordered two as I am giving one to my Mother for Christmas, but they restocked and sold out all but one in 24 hours! I'm sure that a lot more people will say good things about this heater. BTW I checked the kW per hour usage with a meter, on the high setting and it uses around 1.36 kWh or around 15 cents/hr at average electric rates, but it is very unlikely that you would need to run this heater constantly on high unless you were heating a very large room. I would assume that it would be about half that on the low setting (750W).
The only downside that kept it from getting five stars is that it is a bit noisy.

List Price: $74.99
Sale Price: $59.99
Today's Bonus: 20% Off

I bought this heater based on the features and a good CR review as there were a limited # of reviews on Amazon. One thing I liked about this heater is it puts out heat at approx. 24" off of the floor. I use it in my home office and my two previous Holmes ceramic heaters were very low and would direct the heat into my computer air intake which wasn't very good for me or my computer. Although I really didn't think I needed a remote to change the heat settings, I find it very useful to control the oscillation or temp setting. You can change all settings manually on the front panel if you loose your remote. It seems to throw out much more heat than any of my previous 1500W heaters and easily heats my 16 x 16 ft room in short order. The LED display is well lit and the construction is fairly impressive and sturdy. The fan seems to have much more CFM than your average space heater, but without any real dicernable noise especially when on the phone etc. About the only thing I can complain about is that in the Automatic temperature control mode the unit will only run in the high 1500W mode. If you use the Auto thermostatically controlled feature and it's relatively close to you, it will get a little too warm which is easily resolved by turning the temperature down or putting it in the manual mode on low. I think for this heater to keep you warm, it doesn't really need to be within 5ft as you can place it anywhere in most rooms in the auto mode to keep the whole room temperature constant. For the cost, I don't see how anyone could complain about this heater, but I'm sure someone will! I just ordered a second one for my family room which is much larger, but I feel it will handle it with ease. I would have ordered two as I am giving one to my Mother for Christmas, but they restocked and sold out all but one in 24 hours! I'm sure that a lot more people will say good things about this heater. BTW I checked the kW per hour usage with a meter, on the high setting and it uses around 1.36 kWh or around 15 cents/hr at average electric rates, but it is very unlikely that you would need to run this heater constantly on high unless you were heating a very large room. I would assume that it would be about half that on the low setting (750W).
Click Here For Most Helpful Customer Reviews >>
I put this heater in use at the beginning of December, 2012 and kept track of the power usage with a Kill-A-Watt meter for that month. I ran it for about 8 hours every night set at 65 degrees to keep the master bedroom warm while the whole-house thermostat was set at 60 degrees. For the month of December the heater used 112.39 kwh which at my electrical rate in Michigan cost $7.83 or 25.2 cents per day. I consider this to be very good. The house is well insulated with outside storm windows on the bedroom. The bedroom is 14x17 ft with an 8 ft ceiling that slopes up to 14 ft.The only downside that kept it from getting five stars is that it is a bit noisy.
Best Deals for Lasko 6462 Full-Circle Warmth Ceramic Ceramic Electric Space Heater
Great product! Immediately turns out a lot of heat but the heater itself stays cool to the touch. Love the setting to have the heater automatically monitor the room temp and switch on and off in order to maintain the desired temperature. The only thing I do not like about the heater is that after being turned off, when you turn it back on it goes straight to the heater setting instead of "remembering" that we had been using the automatic temperature monitoring setting.Honest reviews on Lasko 6462 Full-Circle Warmth Ceramic Ceramic Electric Space Heater
This is a sturdy and very responsive heater. The instructions are clear and it puts a lot of heat out. It is light enough to move around easily but solid and not at all wobbly. I would recommend it to anyone needing a boost in a too cold room.Find helpful customer reviews and review ratings for Lasko 6462 Full-Circle Warmth Ceramic Ceramic Electric Space Heater
Heater works well. The remote is very handy when your sitting down and need to tweak the temp.Well made product. The only reason I didn't give it 5 star is it should have some kind of handle to move it around,since its supposed to be portable.
Subscribe to:
Posts (Atom)










