Click Here For Most Helpful Customer Reviews >>
This portable hydronic heater works very well on a plug in 120vac receptacle and is very economical versus the regular convection heaters which keep you either too hot or too cold. It keeps my smaller room at a constant and comfortable temperature as per my setting. The reason for the 4 rating is the digital readout and controls are too low. I have to get on my hands and knees to set them, which isn't all too often, however It would be nice if Marley would either incorporate a remote control or position the readout and controls at a more convenient level. I also wish Marley would make this heater in a smaller version, like approx. 36-48 inches as I do have a need for a less lengthy one. Some other manufactures have smaller ones but they all require 240VAC and are not portable since they must be attached to a wall and do require an additional wall mounted thermostat. No thanks, too expensive and too complicated and involved for me!
Showing posts with label tent heater. Show all posts
Showing posts with label tent heater. Show all posts
Tuesday, November 18, 2014
Qmark / Marley LFH1502P Portable Electric Hydronic Heater - 120 Review
This a great heater. It blends unobtrusively into the room. Just set it to the desired temprature and watch it take over! It has 5 different heat settings which automatically go up or down depending on the temprature setting. It quietly warms up the entire room without the heat blast "in your face" that other heaters have. Great for the early winter time when you need some heat and avoid turning the full house heat on. I have 3 bedroom floor (about 1000 sq feet) and this heater was enough when the outside temp was in the low 40's and I did not need to turn the house heat on.
Wednesday, October 1, 2014
Review of Soleus Air MS-09 Oscillating Reflective Heater
Customer Ratings: 
List Price: $59.99
Sale Price: $53.24
Today's Bonus: 11% Off

I'm getting another one, I love this sucker so much.
Energy efficient at 400 and 800 watts vs 1500 for a convection heater.
In short, if you:
1) stay pretty much in one spot during the day
2) have high ceilings or your home is really hard to heat
3) have dust allergies
4) use a heater just during your waking hours and pile on the warm blankets at night
5) are not bothered by some light being emitted from your heater
6) have cats or dogs
7) love how it feels when the sun warms up your clothes and skin
8) are concerned about energy efficiency
9) need a heater that won't burn anyone who bumps into it
then this is the space heater for you!
To save money I decided to invest in this little heater and I was not disappointed. It just consumes 400 W (low setting) and 800 W (high setting).
To give you an idea of how good it is, I turned off the built-in electric heater in my apartment and the Delonghi heater and I did not feel cold at all even in the LOW SETTING.
The lights at LOW SETTING is not as bright as I thought. But in case you cannot sleep with its emitted light, I suggest that you put a blindfold. The light feels good. This device has also a safety mechanism. If you tip it, it will stop working and if it reached a certain high temperature,it will automatically stop. To sum up, a good buy.
This heater is made in China. I just hope that it will last for a long time.
UPDATE: In colder evenings, you need to use the HIGH SETTING. The light is too bright but the heat is enough esp. if you are at least 3 feet apart from it. In my case, I still need to turn on my apartment's built-in electric heater but only at LOW SETTING. This Soleus heater is just not enough to heat my whole room which is connected to the kitchen.
Well, it has been more than a year since I updated this review. I now live in Moscow, ID (from Reno, NV)doing postdoctoral studies and this heater still works!
The effective range of this product is limited. We keep it about 5-8 feet away to heat an one person at a time. It really has a max target area diameter of about 4-5 feet from that distance. Left on for a while in a small room, Like a bathroom...it does eventually heat up that space, but otherwise it's for very target heating.
Positives:
Warm instantly when in target area
Not hot to touch
energy efficient
Negative:
Really bright, you can't look at the thing for more than a few seconds when it's on high. We refer to it as "turning on the sun." Imagine a 50 watt bulb with a silver reflecting dish pointed at you.
See the angle that it's pointed in in the picture? It's slightly up. It's as low as it goes, it doesn't go directly straight or down why does this matter? We'll because say I want to heat myself from behind so it doesn't blind me I can't place it on a shelf or table.. It has to be on the floor and every chair I know has a back...so no help there. It will always shine on you. I'd also use it to heat my bed but I can't point it down at the covers. So basically it must be on the floor only.
Overall, a good product if you need target heating, from the floor, and can deal with brightness.
UPDATE (11/07):
After using this for two years, it's easily paid for itself. However, I bought one for a friend and it and its replacement (covered by Soleus under warranty) were defective. The third one she received seems to be OK, however she prefers the Presto Parabolic Heater since she claims it heats a wider area and doesn't emit as much light. The Presto costs half again as much ($75), may do slightly better but also uses more electricity, so figure out what's right for you. I should add I don't use the Soleus at night, it's less intrusive and more efficient to use an electric blanket instead.
UPDATE (1/13):
Still going! I bought another Soleus a few years ago, slightly different model but both work like charms. I'm convinced this is the best value in space heaters and I'm glad to see they're still available. Look for the best deal and get yours while they last things this good are usually phased out for more expensive/lesser quality "upgrades".
This heater would allow one to keep the temperature of the home much cooler, while staying nice and warm while reading, watching TV, working at the computer, etc. Another advantage to the heater is where the people in the home have different personal "thermostats". Some Nordic types like to be cool all the time and even sleep with a window open every night. Others like to be toasty warm all the time, seemingly lacking the inner furnace that keeps others comfortable in relatively cool (60-65°) household winter temperatures. In addition, as people age, some want to be even warmer as is often the case in nursing homes and I know of those who keep their winter house temperature at 85° on the coldest of days. Unbelievable to me both in terms of energy cost and energy waste.
The bottom line: this heater will save you money, and might help household relationships by allowing those who want to be toasty warm all the time to be so, while allowing others who prefer to be cool, to be comfortable as well.
Read the directions and keep them. When the heater trips off, which can happen from movement or if it is knocked over, etc., it will not come back on until it has cooled, which can take 10 minutes. This is a wise safeguard for this and any electric heater, as they do produce warmth, and one must use common sense in using them. Another example: one should always use a heavy-duty extension cord with electric heaters, which is mentioned in the manual. All easy to do, but important to be aware of in these days of central heating, when many are unfamiliar with space heaters and do not take the time to read the directions. It is always sad to hear of house fires, carbon monoxide poisoning, etc., during the holiday season, as people forget basic safety matters in their desire to be warm.

List Price: $59.99
Sale Price: $53.24
Today's Bonus: 11% Off

I'm getting another one, I love this sucker so much.
Energy efficient at 400 and 800 watts vs 1500 for a convection heater.
In short, if you:
1) stay pretty much in one spot during the day
2) have high ceilings or your home is really hard to heat
3) have dust allergies
4) use a heater just during your waking hours and pile on the warm blankets at night
5) are not bothered by some light being emitted from your heater
6) have cats or dogs
7) love how it feels when the sun warms up your clothes and skin
8) are concerned about energy efficiency
9) need a heater that won't burn anyone who bumps into it
then this is the space heater for you!
Click Here For Most Helpful Customer Reviews >>
I'm a graduate student living alone in a one-bedroom apartment. Here in Reno, I pay more than $100 for the electricity during the winter season. I figured out that this is probably due to my heaters which are electric-powered. My apartment has a built-in electric heater and I have a Delonghi heater (DFH 333MT). I have no complaints about the Delonghi heater except that it consumes lots of electricity(1500 W) and I just don't like the feeling of the warm air plus it makes me feel dry.To save money I decided to invest in this little heater and I was not disappointed. It just consumes 400 W (low setting) and 800 W (high setting).
To give you an idea of how good it is, I turned off the built-in electric heater in my apartment and the Delonghi heater and I did not feel cold at all even in the LOW SETTING.
The lights at LOW SETTING is not as bright as I thought. But in case you cannot sleep with its emitted light, I suggest that you put a blindfold. The light feels good. This device has also a safety mechanism. If you tip it, it will stop working and if it reached a certain high temperature,it will automatically stop. To sum up, a good buy.
This heater is made in China. I just hope that it will last for a long time.
UPDATE: In colder evenings, you need to use the HIGH SETTING. The light is too bright but the heat is enough esp. if you are at least 3 feet apart from it. In my case, I still need to turn on my apartment's built-in electric heater but only at LOW SETTING. This Soleus heater is just not enough to heat my whole room which is connected to the kitchen.
Well, it has been more than a year since I updated this review. I now live in Moscow, ID (from Reno, NV)doing postdoctoral studies and this heater still works!
Best Deals for Soleus Air MS-09 Oscillating Reflective Heater
I bought this product to help heat a large loft. Knowing that hot air would simply blow away and be expensive, I thought I would focus on something energy efficient that could target a location. So here's a little breakdown.The effective range of this product is limited. We keep it about 5-8 feet away to heat an one person at a time. It really has a max target area diameter of about 4-5 feet from that distance. Left on for a while in a small room, Like a bathroom...it does eventually heat up that space, but otherwise it's for very target heating.
Positives:
Warm instantly when in target area
Not hot to touch
energy efficient
Negative:
Really bright, you can't look at the thing for more than a few seconds when it's on high. We refer to it as "turning on the sun." Imagine a 50 watt bulb with a silver reflecting dish pointed at you.
See the angle that it's pointed in in the picture? It's slightly up. It's as low as it goes, it doesn't go directly straight or down why does this matter? We'll because say I want to heat myself from behind so it doesn't blind me I can't place it on a shelf or table.. It has to be on the floor and every chair I know has a back...so no help there. It will always shine on you. I'd also use it to heat my bed but I can't point it down at the covers. So basically it must be on the floor only.
Overall, a good product if you need target heating, from the floor, and can deal with brightness.
Honest reviews on Soleus Air MS-09 Oscillating Reflective Heater
If you want heat, this one's for you. It puts out more heat at 400 watts than most 1500 watt heaters, so it'll cost far less to run. I haven't even set it on high (800 watts) because I haven't needed to. Some may object to the light it emits but that's like complaining about the sun because it's too bright if you stare at it. You can set it up peripherally or at a slight angle away from your direct vision, avoid the light and still get plenty of heat. Buy this now while it's on sale and you can get free shipping. I don't know how long these halogen bulbs last, but it really does the job.UPDATE (11/07):
After using this for two years, it's easily paid for itself. However, I bought one for a friend and it and its replacement (covered by Soleus under warranty) were defective. The third one she received seems to be OK, however she prefers the Presto Parabolic Heater since she claims it heats a wider area and doesn't emit as much light. The Presto costs half again as much ($75), may do slightly better but also uses more electricity, so figure out what's right for you. I should add I don't use the Soleus at night, it's less intrusive and more efficient to use an electric blanket instead.
UPDATE (1/13):
Still going! I bought another Soleus a few years ago, slightly different model but both work like charms. I'm convinced this is the best value in space heaters and I'm glad to see they're still available. Look for the best deal and get yours while they last things this good are usually phased out for more expensive/lesser quality "upgrades".
Find helpful customer reviews and review ratings for Soleus Air MS-09 Oscillating Reflective Heater
I recommend this heater, especially if want to stay toasty warm while saving energy. With energy costs going up dramatically this winter, one real way of saving money is to heat the area you are in, rather than the entire house. In the old days, the wood stove would heat the central area of the house, and the bedrooms would be bone cold and one would be buried under a pile of blankets at night. This might not be our favorite thing, but was wise in terms of energy use (and saved a lot of wood-chopping!).This heater would allow one to keep the temperature of the home much cooler, while staying nice and warm while reading, watching TV, working at the computer, etc. Another advantage to the heater is where the people in the home have different personal "thermostats". Some Nordic types like to be cool all the time and even sleep with a window open every night. Others like to be toasty warm all the time, seemingly lacking the inner furnace that keeps others comfortable in relatively cool (60-65°) household winter temperatures. In addition, as people age, some want to be even warmer as is often the case in nursing homes and I know of those who keep their winter house temperature at 85° on the coldest of days. Unbelievable to me both in terms of energy cost and energy waste.
The bottom line: this heater will save you money, and might help household relationships by allowing those who want to be toasty warm all the time to be so, while allowing others who prefer to be cool, to be comfortable as well.
Read the directions and keep them. When the heater trips off, which can happen from movement or if it is knocked over, etc., it will not come back on until it has cooled, which can take 10 minutes. This is a wise safeguard for this and any electric heater, as they do produce warmth, and one must use common sense in using them. Another example: one should always use a heavy-duty extension cord with electric heaters, which is mentioned in the manual. All easy to do, but important to be aware of in these days of central heating, when many are unfamiliar with space heaters and do not take the time to read the directions. It is always sad to hear of house fires, carbon monoxide poisoning, etc., during the holiday season, as people forget basic safety matters in their desire to be warm.
Cheap Dimplex DFP15-1132NG Fireplace Compact 28 " x 29-3/4 "x 9 "
I love this little electric fireplace heater. The fan makes it even better than the oil filled radiator type in many cases because the heat gets distributed so much better. Looks great. The only negative is the bulb for the 'fire' seemed way too hot so I took it out and replaced it with a smaller wattage (maybe 7 watts) so the back wouldn't get so hot. You can't even tell and my 'flames' flicker very nicely still.
I highly recommend this little unit for smaller areas. You'll love it!
Thanks Again
Roger Proctor
I highly recommend this little unit for smaller areas. You'll love it!
Click Here For Most Helpful Customer Reviews >>
I bought this item from New Life Electronics Surplus3, and it was NOT the same item pictured. I deleted my seller feedback because I also had refund issues which were resolved, but I still feel that anybody looking to buy this should know that this particular seller may not send you the item as advertised. The product I received was a completely different model so it did not have faux marble on the front, the dimensions were not accurate, there were no instructions included in the packaging, the remote was damaged, and this thing ran our energy bill up at least 50%. I was promised a new remote, which I did not receive. I was also promised a partial refund initially by the seller, which I never received, and then Amazon issued a full refund but it took quite a while to appear on my credit card bill. The seller, upon receiving negative feedback, began to call my phone several times a day without leaving a message and they also e-mailed me several times complaining that my negative feedback was hurting their business and that my problem was actually with Amazon, not with them. My refund issue has been resolved, but please be aware of these other issues before ordering this item from that seller.Best Deals for Dimplex DFP15-1132NG Fireplace Compact 28 " x 29-3/4 "x 9 "
I am very please with this item and the seller shipped it to me quickly. If you want to buy from a trusted seller then this is your guy. I am a early riser and the first thing I do is turn it on and sit back and watch the realistic flames, I bought this item for it' price and features and as of todays date I don't regret my purchase. If I had to rate this product and it's seller on a scale of 1 10 I would have to give it an 8 1/2.Thanks Again
Roger Proctor
Wednesday, July 2, 2014
Cheap Sengoku Heat Mate Portable Convection Kerosene Heater 23,000 BTU
I bought this unit to heat my greenhouse on frosty nights, It does exactly what I needed it to do. It heats a 12X24 ' greenhouse to 70 degrees when the outside temp is below 30. The plants love it.
it was putting out so much heat it would make my ceiling fan twirl.. you must learn how to adjust flame and what the flame should look like. only buy the best kerosene available..
only smells are at start-up and shut down. once it gets up to operating temperature no smell at all. not even a little..
full tank does last 12 hrs.. not sure what happened to the other reviewer.
i would recommend this to buy.. but only if you would use it wisely..
the only reason i didn't give it all stars was the handle that all kerosene heaters have.. seems that they can be engineered better. the handle works but seems kinda flimsy..
i would buy another one but one is enough.. i had a hard time finding a kerosene heater and hurried up and grabbed this one when i found it at an ace hardware store..
Edited to update.
I ended up giving this away. It would not heat evenly and the wick was constantly giving me issues. I am very disappointed with this product. I do not recommend.
Click Here For Most Helpful Customer Reviews >>
This product does exactly what it is supposed to do and does it great! Heats my log cabin in the woods, in winter, to a degree where I'm comfortable. Very VERY light fumes in the air from the heater! Worth every penny I spent! As far as the other reviewer... I'm not sure why he was having so may problems with his unit. Mine works great, planning on buying a second one, recommended to all who need a cheap form of heat for a big space! =)Best Deals for Sengoku Heat Mate Portable Convection Kerosene Heater 23,000 BTU
this heater works good.. you need to "break it in" first. it's best to do that outdoors..i think it took my heater about 6 hrs. maybe a little more. can't remember..i know it doesn't make sense to have a heater outdoors but if you do that inside you get burning metal, paint curing smell??,some of the shiny metal parts will change color. that is supposed to happen..it was putting out so much heat it would make my ceiling fan twirl.. you must learn how to adjust flame and what the flame should look like. only buy the best kerosene available..
only smells are at start-up and shut down. once it gets up to operating temperature no smell at all. not even a little..
full tank does last 12 hrs.. not sure what happened to the other reviewer.
i would recommend this to buy.. but only if you would use it wisely..
the only reason i didn't give it all stars was the handle that all kerosene heaters have.. seems that they can be engineered better. the handle works but seems kinda flimsy..
i would buy another one but one is enough.. i had a hard time finding a kerosene heater and hurried up and grabbed this one when i found it at an ace hardware store..
Honest reviews on Sengoku Heat Mate Portable Convection Kerosene Heater 23,000 BTU
Purchased one a couple years ago and was happy with it's performance. This year we needed a new tank assembly as ours started to leak. After many unanswered calls to Sengoku L.A., LTD. Torrance, Ca I finally made a call that was answered by a human.(over a month had gone by since I started the process of trying to order the part) I informed the person of the part I needed, part number etc. and was told that they don't carry the part and I would have to purchase a new unit. Just to give you an idea of what you will be up against if anything goes wrong with your unit!Find helpful customer reviews and review ratings for Sengoku Heat Mate Portable Convection Kerosene Heater 23,000 BTU
I am not happy with this heater. I needed to replace the wick not even after 2 months of part time use. This was a first for me and I have been using k.heaters on and off for years to help heat my home in the winter.Edited to update.
I ended up giving this away. It would not heat evenly and the wick was constantly giving me issues. I am very disappointed with this product. I do not recommend.
Wednesday, May 14, 2014
Best Whynter 14,000 BTU Dual Hose Portable Air Conditioner (ARC-14S) Deals
Customer Ratings: 
List Price: $599.99
Sale Price: $498.35
Today's Bonus: 17% Off

I got this to supplement the window unit I've been using for years and ended up just completely replacing the window unit.
Very robotic design, it stands around 3ft tall and is in fact rather slim once you take it out of the packaging. Came with all the necessary accessories to get it running immediately. Hooking it up and putting the hot air vent where my window A/C used to be was extremely straightforward.
We usually power it up after my daughter returns from pre-school and set the temperature to around 74F. It usually shuts off at about 2am when the room and outside temps are nice and comfortable. The air is extremely cold around the unit and gets a good sized room down to a nice temp really fast. It seems very quiet during the day with all the other sounds and my daughter has slept like a baby ever since we got it. I does emit a low hum when it's cooling but otherwise the fan sound is not noticeable to me. You can turn it on high for a few minutes but after awhile, that's overkill. It does a great job on a low fan setting once the room is almost at the temp you want it at.
I really like the idea of not having to use central air like in our old apartment. I think over time the utility savings will easily cover the cost of the unit. The best part is I can bring it with us if we ever move.
It's worked excellently for a couple of weeks now and I may just end up getting another for our own room.
Whynter Eco Friendly 14000 BTU Dual Hose Portable Air Conditioner
Contrary to my thoughts, it works great. It is not real loud (as some say it is). Even in July with 105° Texas heat and 98% humidity this unit will pull the temp down to a comfortable degree. It will take about an hour and a half but it is well worth it.
Ok this is the second summer I have had this unit and If you live in Los Angeles you know its been 95 to 105 degrees all week! Havent used this AC since last summer so this week we brought it out and hooked it up and it is still working flawlessly! No problems what so ever same sound level same cold output all the buttons still work and the hoses are still fine. So far for me this unit has been rock solid and I am still very happy with my purchase, if you intend on buying please read my original review below and spend a little time to hook it up correctly.
______________________________________________________________________________________________________________________________________
I bought this AC after doing some research and the reviews here.
My unit arrived in great condition and after reading some reviewers say the hose attachment did not stay on with the screws provided I went to the hardware store and bough 8 bolts, nuts and lock washers as well as a plastic filler plate to fill the gap that the vent didnt cover. Total price $8.98.
I put everything together with the bolts I bought and threw away the screws that came with it, I can see how they would not be able to hold the hose connector properly they are just some short wood screws that go through connector to the window vent plate, not a very secure way to hold it on but oh well.
I turned the unit on immediately very cold air poured out now it wasnt very hot in the room maybe 75 but you could feel the difference it made. I will give a better review on its full performance after the summer which I feel will be a good test the room I have it in has direct sunlight all day and is the hottest room in the house.
The unit looks well made and is very solid the noise level is not that bad my portable unit is more quite than my window unit that has only 12,000 btu's.
So far I am happy but I will update this as the summer goes into full heat mode.
Do your self a favor and take the vent plate and one of the hose connectors to a hardware store and get the bolts this will save alot of cussing later on. I truly believe those wood screws will not last too long if there is any amount of pressure placed on the plate from the vent hoses.
Oh and one other thing the vents, I am not to sure why they are designed to go just straight up? I am going to make a hood to redirect the air a little more forward but I will try it the way it was designed and report back.
Dean
UPDATE 6/25/2012
Ok so we have neen through a few 90 degree days here and I have to say that there are a few things I have learned about AC efficiency. first insulation is a must a room the is not well insulated will not cool as well as a room that is!
My AC unit is in a room with a sliding glass door that gets full sunlught all day long so it gets pretty hot with the AC running full blast it got cool but not COLD, i mean it was comfortable but i felt it was at the limit of what it could do.
What I did was buy some solar shade screens and placed them in front of the sliding doors not the whole door just the upper half. The AC unit now does an a amazing job of cooling the room! The heat coming in from the window was canceling out the cooling from the AC so it never had a chance to do its thing. it got so cold in there on a 80 degree day I found my kids watching TV with blankets covering them!
So my final thoughts on this purchase are, you must assess the room and the environmental that this AC will be used in and use some common sense if there is a heat source in the room that will cause it to heat up the AC will only go so far to keep the temps down if you can help the unit by minimizing any direct heat to the room the AC will perform at its best.
The good:
It works. It keeps my office room cool.
It's portable. After working in my office, I can roll this out to the living room. My living room isn't too big, but it's open to the kitchen, so it does take some more time to cool the room.
The bad:
Minus half star for the window kit. The window kit does not fit my window. It's shorter than what I need. The screws would not stay on the circle brackets where the hoses are attached. That's why I used my own screws and bolts I bought from Home Depot. See notes below on how I made my own window kit. I also added pictures to show what I made.
Minus half star for the noise. It's loud. While I'm in the living room, I have to turn the volume up more than usual on my TV. It's just as loud as my regular window A/C in my bedroom. But that is to be expected so that's why I'm only taking half a star off.
Homemade Window Kit:
I went to Home Depot and had them cut a wood board to fit my window (6.5" x 46"). I bought some #6 screws (1 inch) with bolts and washers. I also bought weather stripping. I went to Harbor Freight and bought a cheap "Cut Out Tool". It's sort of like a rotary tool.
I used the original window kit to draw the circles on to the wood board and mark the screw holes. I spaced the openings a little more apart from each other because with the original window kit, the hoses were difficult to attached cuz they are so close to each other. Once the circle and screw holes were marked, I used the rotary tool to cut the circles out of the board. Then I drilled the screw holes. I then attached the circle bracket to the board using #6 screws and bolts. I added weather stripping tape to one side so when the window closed, it makes a nice seal.
Other thoughts:
The remote is nice, but I never use it.
I am worried the drain might leak, but I'll keep an eye on it. The manual says that if the reservoir gets full, the compressor will stop. You'll know when the compressor has stop when it's just the fan that's running and it's not blowing cold air anymore.
I'll update this review if I have any issues. As of right now, YES I do recommend this portable A/C unit.

List Price: $599.99
Sale Price: $498.35
Today's Bonus: 17% Off

I got this to supplement the window unit I've been using for years and ended up just completely replacing the window unit.
Very robotic design, it stands around 3ft tall and is in fact rather slim once you take it out of the packaging. Came with all the necessary accessories to get it running immediately. Hooking it up and putting the hot air vent where my window A/C used to be was extremely straightforward.
We usually power it up after my daughter returns from pre-school and set the temperature to around 74F. It usually shuts off at about 2am when the room and outside temps are nice and comfortable. The air is extremely cold around the unit and gets a good sized room down to a nice temp really fast. It seems very quiet during the day with all the other sounds and my daughter has slept like a baby ever since we got it. I does emit a low hum when it's cooling but otherwise the fan sound is not noticeable to me. You can turn it on high for a few minutes but after awhile, that's overkill. It does a great job on a low fan setting once the room is almost at the temp you want it at.
I really like the idea of not having to use central air like in our old apartment. I think over time the utility savings will easily cover the cost of the unit. The best part is I can bring it with us if we ever move.
It's worked excellently for a couple of weeks now and I may just end up getting another for our own room.
Whynter Eco Friendly 14000 BTU Dual Hose Portable Air Conditioner
Click Here For Most Helpful Customer Reviews >>
This has been a lifesaver during hot summer days. I agree with the negative reviews about it being noisy, but I have it in my bedroom and I got used to it after 2 nights. I sleep through it now. The LED is also very bright, but not so much that it keeps me awake. I took off a star because of the useless window mount. The hoses weren't long enough for it to reach my window, so I went to Home Depot to build a rig. Replacement hoses are EXPENSIVE, so I didn't buy them. The screws are very short and pop right out of the cheap plastic mount, so I'm using tape to hold them in place. I have since moved and now have casement windows, so I'm in the process of building a new mount in which I will screw the hoses directly into a piece of plexiglass which will sit in the window. I've read that this will work fine, so I'm not concerned about it. One of the negative reviews I read about this unit is that it failed to cool the space. It is designed to cool roughly 600 square feet (a small apartment) so it works fine for my place. I also use a fan to push the cool air into the other room. I like the look of the unit, as well as the fact that it can be a fan or a dehumidifier. I bought plastic tubing for the water collection tank, but it has yet to produce a single drop. The vent hose is doing its job.Best Deals for Whynter 14,000 BTU Dual Hose Portable Air Conditioner (ARC-14S)
I built a bar in my garage that is ~ 600 sqft. Now understand, it has walls and insulation but the exterior is corrugated tin and gets very hot. I started my journey of research to find a unit to make it comfortable. I looked at all sorts of options and spoke to several AC installers. Typically speaking, AC's are rated by the BTU's (12K BTU per 400 sqft) and I knew that 14K was not enough to cool down 600 sqft . I thought I would try it anyway because of the ease. When the unit arrived I took it out of the box, connected a few things, and turned it on (yes it is that easy). Just remember...there are two hoses in the back of the unit (intake and output). The output hose must be ventilated and the input needs to be left disconnected from the window. The intake is what pulls the air from the room, the unit cools the air, the cold air is blown back into the room and the hot air it vented out. That is basically how a unit (any AC unit) works.Contrary to my thoughts, it works great. It is not real loud (as some say it is). Even in July with 105° Texas heat and 98% humidity this unit will pull the temp down to a comfortable degree. It will take about an hour and a half but it is well worth it.
Honest reviews on Whynter 14,000 BTU Dual Hose Portable Air Conditioner (ARC-14S)
UPDATE 7/2/2013Ok this is the second summer I have had this unit and If you live in Los Angeles you know its been 95 to 105 degrees all week! Havent used this AC since last summer so this week we brought it out and hooked it up and it is still working flawlessly! No problems what so ever same sound level same cold output all the buttons still work and the hoses are still fine. So far for me this unit has been rock solid and I am still very happy with my purchase, if you intend on buying please read my original review below and spend a little time to hook it up correctly.
______________________________________________________________________________________________________________________________________
I bought this AC after doing some research and the reviews here.
My unit arrived in great condition and after reading some reviewers say the hose attachment did not stay on with the screws provided I went to the hardware store and bough 8 bolts, nuts and lock washers as well as a plastic filler plate to fill the gap that the vent didnt cover. Total price $8.98.
I put everything together with the bolts I bought and threw away the screws that came with it, I can see how they would not be able to hold the hose connector properly they are just some short wood screws that go through connector to the window vent plate, not a very secure way to hold it on but oh well.
I turned the unit on immediately very cold air poured out now it wasnt very hot in the room maybe 75 but you could feel the difference it made. I will give a better review on its full performance after the summer which I feel will be a good test the room I have it in has direct sunlight all day and is the hottest room in the house.
The unit looks well made and is very solid the noise level is not that bad my portable unit is more quite than my window unit that has only 12,000 btu's.
So far I am happy but I will update this as the summer goes into full heat mode.
Do your self a favor and take the vent plate and one of the hose connectors to a hardware store and get the bolts this will save alot of cussing later on. I truly believe those wood screws will not last too long if there is any amount of pressure placed on the plate from the vent hoses.
Oh and one other thing the vents, I am not to sure why they are designed to go just straight up? I am going to make a hood to redirect the air a little more forward but I will try it the way it was designed and report back.
Dean
UPDATE 6/25/2012
Ok so we have neen through a few 90 degree days here and I have to say that there are a few things I have learned about AC efficiency. first insulation is a must a room the is not well insulated will not cool as well as a room that is!
My AC unit is in a room with a sliding glass door that gets full sunlught all day long so it gets pretty hot with the AC running full blast it got cool but not COLD, i mean it was comfortable but i felt it was at the limit of what it could do.
What I did was buy some solar shade screens and placed them in front of the sliding doors not the whole door just the upper half. The AC unit now does an a amazing job of cooling the room! The heat coming in from the window was canceling out the cooling from the AC so it never had a chance to do its thing. it got so cold in there on a 80 degree day I found my kids watching TV with blankets covering them!
So my final thoughts on this purchase are, you must assess the room and the environmental that this AC will be used in and use some common sense if there is a heat source in the room that will cause it to heat up the AC will only go so far to keep the temps down if you can help the unit by minimizing any direct heat to the room the AC will perform at its best.
Find helpful customer reviews and review ratings for Whynter 14,000 BTU Dual Hose Portable Air Conditioner (ARC-14S)
I will be starting a home job soon, so I wanted a portable A/C unit so I can cool my home-office this summer. I didn't want to cool the whole house, I only want to cool the room I'm in. My windows slide horizontally, so a regular window A/C unit wouldn't work well for me. After alot of research, I decided to go with this model. I live in a 3 BR house (1,600 sq foot) by myself and I am always trying to find ways to save on my electricity bill. I hope this A/C unit will help with the savings.The good:
It works. It keeps my office room cool.
It's portable. After working in my office, I can roll this out to the living room. My living room isn't too big, but it's open to the kitchen, so it does take some more time to cool the room.
The bad:
Minus half star for the window kit. The window kit does not fit my window. It's shorter than what I need. The screws would not stay on the circle brackets where the hoses are attached. That's why I used my own screws and bolts I bought from Home Depot. See notes below on how I made my own window kit. I also added pictures to show what I made.
Minus half star for the noise. It's loud. While I'm in the living room, I have to turn the volume up more than usual on my TV. It's just as loud as my regular window A/C in my bedroom. But that is to be expected so that's why I'm only taking half a star off.
Homemade Window Kit:
I went to Home Depot and had them cut a wood board to fit my window (6.5" x 46"). I bought some #6 screws (1 inch) with bolts and washers. I also bought weather stripping. I went to Harbor Freight and bought a cheap "Cut Out Tool". It's sort of like a rotary tool.
I used the original window kit to draw the circles on to the wood board and mark the screw holes. I spaced the openings a little more apart from each other because with the original window kit, the hoses were difficult to attached cuz they are so close to each other. Once the circle and screw holes were marked, I used the rotary tool to cut the circles out of the board. Then I drilled the screw holes. I then attached the circle bracket to the board using #6 screws and bolts. I added weather stripping tape to one side so when the window closed, it makes a nice seal.
Other thoughts:
The remote is nice, but I never use it.
I am worried the drain might leak, but I'll keep an eye on it. The manual says that if the reservoir gets full, the compressor will stop. You'll know when the compressor has stop when it's just the fan that's running and it's not blowing cold air anymore.
I'll update this review if I have any issues. As of right now, YES I do recommend this portable A/C unit.
Tuesday, May 13, 2014
Buy Lasko 5355 30-Inch Ceramic Pedestal Heater
We bought this for our small office and it does such a wonderful job
of heating the area quietly. We had another heater that was much louder and didn't do nearly the job this one does. I highly recommend it!
of heating the area quietly. We had another heater that was much louder and didn't do nearly the job this one does. I highly recommend it!
Click Here For Most Helpful Customer Reviews >>
I bought this heater to help save on the gas bill this winter. It seems to be a good powerful little heater. I am using it in the living area and right away noticed a difference in temperature. The oscillating feature is nice and so is the remote control unit. There does not seem to be much of a difference in noise level between the high and low setting, but is fairly quiet. All in all a good heater for the money.Best Deals for Lasko 5355 30-Inch Ceramic Pedestal Heater
Although I purchased this originally to heat my master bedroom, which is very large, I also use it in my bathroom. It is thermostatically controlled, takes up less room than regular heaters,and does not have hot surfaces since a fan blows out the hot air, I think it is great. I would recommend it to anyone under the same circumstances.Honest reviews on Lasko 5355 30-Inch Ceramic Pedestal Heater
I bought two of these last winter to help with the heating bill. They worked great until they burnt out. The first one made it about six months then we noticed the thermostat became very incosistent. Shortly after that it turned off and would not turn back on. The second one made it almost to the end of its second winter, but bit it just like the first one. I wish they would have lasted longer than they did.Find helpful customer reviews and review ratings for Lasko 5355 30-Inch Ceramic Pedestal Heater
This heater was easy to assemble, works flawlessly and most importantly, on the slower fan speed,it is so quiet we can leave it running while we sleep. The circulating feature helps warm more area of the room than our previous stationary heater was able to do. I especially like it because it takes up so little floor space, and is reasonably attractive, not squatty or industrial looking.Saturday, April 26, 2014
Discount DeLonghi PACN130HPE Portable Air Conditioner
Customer Ratings: 
List Price: $700.00
Sale Price: $611.98
Today's Bonus: 13% Off

I bought 3 of these units at $500 each. 2 of them ceased working within a week. No help from the help line. OK, try to pack them back up again and lug them back to the store, or ship them. The third one does come on, but the tiny water reservoir fills immediately and is difficult and time-consuming to empty.
this is a very badly designed and thought-out product. I wish I'd never laid eyes on it. I've never been so disgusted with anything I've bought ever. Save yourself. Do not even consider this item. It does not work.
Upon opening the box I immediately became suspicious of its advertised cooling capacities. I instantly knew that in order for it to accomplish its claims, it would have to have two ventilation hoses to an outside window. 1 a fresh air intake hose. And 2 a heat exhaust hose. But it only came with the capacity to handle one hose only which is the heat exhaust hose.
Let me explain Air conditioning principles of operation. There are two primary components of moving heat from the inside of a building to the outside of a building so you are left with a cool interior. One is an evaporator and the other is a condenser.
The evaporator is made cold by the incoming Freon/refrigerant. Warm humid interior air is drawn into the evaporator where it becomes cold and dryer and is then blown out the other/exhaust side of the evaporator as cool air. The heat and moisture/humidity that had been in the incoming air is removed and transferred into the refrigerant as the now cool dry air leaves the exhaust side of the evaporator and is blown back into the room for your enjoyment.
Now the refrigerant has picked up the heat and humidity and must take it somewhere to dump the heat as it becomes cool again so it can continue in its continuous circle loop endlessly. Always picking up heat, moving it, dumping it and coming back to the front of the loop to do it all over again as long as a AC unit is running.
Now comes the condenser. The condenser receives this hot refrigerant as air is blown thru the condenser. Outside air of maybe a 100 degrees enters the condenser and picks up the heat from the refrigerant and is blown back to the outside much hotter than it entered. Around 120 degrees. NOTE: The outside heat and humidity and moisture do go through the condenser but never actually enters the interior of your room in a normal AC unit.
Your interior air is constantly being recycled inside the room thru the evaporator becoming cooler and dryer. Unfortunately ALL homes leak. They let in moisture and heat so you have a constant daily battle of throwing them back outside where it leaked in from. It would be sweet if homes did not leak as you could run your AC for a couple of days and then be good for the rest of the year not needing any more AC. But that is not the case. AC units merely keep up with the rate of leak in so you can stay 15-30 degrees ahead of the game.
You probably want your interior room temperature to stay in the vicinity of 70-80 degrees. So you never want hot humid outside air of 100 degrees entering your home or you might as well just open all your windows.
Here is the problem with DeLonghi PACN130HPE AC units. They do not use outside air to blow through the condenser to pick up the heat from the refrigerant and then take the heat outside to dump it. It uses your interior air to carry the heat outside and dump it. In order for your interior air to be exhausted outside with the heat, air must be entering your home and room from another area to be replacing what is being blown outside. You cannot be continuously removing air from a container unless somewhere else you're letting air back into the container.
So while it is using your inside room air to carry the heat outside, somewhere else in your home hot humid air is re-entering your home to compensate for the air that is constantly being thrown out. Now nearly as fast as your dumping the heat and humidity outside away from you, in another area of the home hot moist air is being sucked back into the house almost as fast as your dumping it out of the house.
While that one room the DeLonghi PACN130HPE AC unit is in is feeling cooler, the other areas of your home are feeling warmer as hot moist air is literally being sucked in at an equal rate that is being thrown out of the one room with the DeLonghi PACN130HPE AC unit.
So the evaporator is blowing 13,000 BTU's of cool into the room the DeLonghi PACN130HPE AC unit is in, but the outside air being sucked into the house is immediately bringing 5,000 BTU's of heat and moist air back in at the same time. That is a HUGE loss that must be applied against the cool claims to determine the real gain your left with.
DeLonghi PACN130HPE does not tell you about the simultaneous losses but only about the claimed gains which are not even close to being accurate by the time you figure in all the other secret factors they don't want you to know about.
I actually tested this by replacing the DeLonghi PACN130HPE with some widow units I had to see what the real gains were. My 5,000 BTU window AC unit did not cool the room as much as the DeLonghi PACN130HPE 13,000 BTU's claimed did. But it did dry the room better as it was not sucking in wet moist air.
However when I placed my 8,000 BTU window unit in the room, it did deliver the same amount of cooling as DeLonghi PACN130HPE 13,000 BTU unit did, but still I gained the advantage from my window unit that the humidity level dropped much lower so it still felt even much better.
While the DeLonghi PACN130HPE 13,000 BTU unit did cool the room as much as my 8,000 BTU window unit did, it could not remove nearly as much humidity because the DeLonghi PACN130HPE is always sucking in wet moist air continuously. My window units did not do that. Besides my 8,000 BTU unit cooling the room exactly as much as DeLonghi PACN130HPE 13,000 BTU unit, I was much further ahead of the game by the fact the room was dry and not humid/muggy as had the DeLonghi PACN130HPE had made it.
The DeLonghi PACN130HPE did surprisingly little to remove the humidity from the room because it was constantly replacing the humidity through the incoming air. Its gains were constantly being eroded away by the constant losses.
Removing humidity from the room and removing it from the air is not the same things. The outside air may have a 80% humidity level. That is very sticky and muggy. You want the inside air below a 30% humidity level to feel very comfortable with. The DeLonghi PACN130HPE did remove humidity from the air but did not remove it from the room because the moisture being removed the air was being replaced at a equivalent level by in incoming air the DeLonghi PACN130HPE had to suck back into the room as it used room air to carry the heat and humidity it captured back outside. So as fast as it threw humidity outside it was sucking it back into the home at the same rate so there never was a drop in the room humidity level.
Be aware of what they won't tell you.
Another fact I did not like about the DeLonghi PACN130HPE was that it took up significant floor space in my room making it look and feel even more crowded. I would much rather have a window unit that uses 70% less electricity than the DeLonghi PACN130HPE as it does so much better at making the room more comfortable and humid free. My 8,000 BTU window unit for $300did a better job than DeLonghi PACN130HPE for $500as it uses 70% less electricity.
The advantage of the DeLonghi PACN130HPE was that it easily rolled around from room to room and in 60 seconds could be connected to virtually any window for quick temporary very inefficient cooling. I will say inefficient cooling is still much better than no cooling. I almost kept the DeLonghi PACN130HPE because I have another mobile home that needs remodeling and the DeLonghi PACN130HPE would be super quick and easy to set up in whatever room I happened to be working in that particular day, and then move it to another room the next day. My 8,000 BTU window unit takes 5 minutes to set up in any particular room. It weighs 40 pounds and does not roll around so I have to carry it from window to window. So what?
The advantages of the DeLonghi PACN130HPE were not large enough to justify keeping it for short term temporary cooling so I took it back to Lowes and traded it in for a 24,000 BTU window unit that really kicks ass for the same exact money. My 24,000 BTU window unit gives me 300% more cooling than the DeLonghi PACN130HPE does.
The DeLonghi PACN130HPE did have a good digital thermostat that held the room temp even without much fluctuation. It was attractive looking for what it was, a floor space user upper.
The DeLonghi PACN130HPE was not a total flop, but it was a far cry from what they claim and advertise it to be. Matter of fact, it was so far from the truth that I call it a gimmick and fake AC unit. Hope this helps you.
The room stays warm and even with the temp outside at 80 the room never get lower than 75... It's going back to the store for a window unit.
(Update) Keep in mind this is a 14,000 Btu unit.... I just replaced it with a 12,000 BTU window AC and the room temp difference is huge. I wish this unit had worked.. It seems like a great idea... But it needs a redesign.

List Price: $700.00
Sale Price: $611.98
Today's Bonus: 13% Off

I bought 3 of these units at $500 each. 2 of them ceased working within a week. No help from the help line. OK, try to pack them back up again and lug them back to the store, or ship them. The third one does come on, but the tiny water reservoir fills immediately and is difficult and time-consuming to empty.
this is a very badly designed and thought-out product. I wish I'd never laid eyes on it. I've never been so disgusted with anything I've bought ever. Save yourself. Do not even consider this item. It does not work.
Click Here For Most Helpful Customer Reviews >>
I used to do Air conditioning and Heating for a living so I know very well what I am talking about. For many years now I have a different career. I recently bought a house that was missing its central heat and AC air unit. My mom intending to be sweet and wanting to help out bought me a moving in gift which is this DeLonghi PACN130HPE. She forgets I am a expert in AC as I lived out of state while in that career.Upon opening the box I immediately became suspicious of its advertised cooling capacities. I instantly knew that in order for it to accomplish its claims, it would have to have two ventilation hoses to an outside window. 1 a fresh air intake hose. And 2 a heat exhaust hose. But it only came with the capacity to handle one hose only which is the heat exhaust hose.
Let me explain Air conditioning principles of operation. There are two primary components of moving heat from the inside of a building to the outside of a building so you are left with a cool interior. One is an evaporator and the other is a condenser.
The evaporator is made cold by the incoming Freon/refrigerant. Warm humid interior air is drawn into the evaporator where it becomes cold and dryer and is then blown out the other/exhaust side of the evaporator as cool air. The heat and moisture/humidity that had been in the incoming air is removed and transferred into the refrigerant as the now cool dry air leaves the exhaust side of the evaporator and is blown back into the room for your enjoyment.
Now the refrigerant has picked up the heat and humidity and must take it somewhere to dump the heat as it becomes cool again so it can continue in its continuous circle loop endlessly. Always picking up heat, moving it, dumping it and coming back to the front of the loop to do it all over again as long as a AC unit is running.
Now comes the condenser. The condenser receives this hot refrigerant as air is blown thru the condenser. Outside air of maybe a 100 degrees enters the condenser and picks up the heat from the refrigerant and is blown back to the outside much hotter than it entered. Around 120 degrees. NOTE: The outside heat and humidity and moisture do go through the condenser but never actually enters the interior of your room in a normal AC unit.
Your interior air is constantly being recycled inside the room thru the evaporator becoming cooler and dryer. Unfortunately ALL homes leak. They let in moisture and heat so you have a constant daily battle of throwing them back outside where it leaked in from. It would be sweet if homes did not leak as you could run your AC for a couple of days and then be good for the rest of the year not needing any more AC. But that is not the case. AC units merely keep up with the rate of leak in so you can stay 15-30 degrees ahead of the game.
You probably want your interior room temperature to stay in the vicinity of 70-80 degrees. So you never want hot humid outside air of 100 degrees entering your home or you might as well just open all your windows.
Here is the problem with DeLonghi PACN130HPE AC units. They do not use outside air to blow through the condenser to pick up the heat from the refrigerant and then take the heat outside to dump it. It uses your interior air to carry the heat outside and dump it. In order for your interior air to be exhausted outside with the heat, air must be entering your home and room from another area to be replacing what is being blown outside. You cannot be continuously removing air from a container unless somewhere else you're letting air back into the container.
So while it is using your inside room air to carry the heat outside, somewhere else in your home hot humid air is re-entering your home to compensate for the air that is constantly being thrown out. Now nearly as fast as your dumping the heat and humidity outside away from you, in another area of the home hot moist air is being sucked back into the house almost as fast as your dumping it out of the house.
While that one room the DeLonghi PACN130HPE AC unit is in is feeling cooler, the other areas of your home are feeling warmer as hot moist air is literally being sucked in at an equal rate that is being thrown out of the one room with the DeLonghi PACN130HPE AC unit.
So the evaporator is blowing 13,000 BTU's of cool into the room the DeLonghi PACN130HPE AC unit is in, but the outside air being sucked into the house is immediately bringing 5,000 BTU's of heat and moist air back in at the same time. That is a HUGE loss that must be applied against the cool claims to determine the real gain your left with.
DeLonghi PACN130HPE does not tell you about the simultaneous losses but only about the claimed gains which are not even close to being accurate by the time you figure in all the other secret factors they don't want you to know about.
I actually tested this by replacing the DeLonghi PACN130HPE with some widow units I had to see what the real gains were. My 5,000 BTU window AC unit did not cool the room as much as the DeLonghi PACN130HPE 13,000 BTU's claimed did. But it did dry the room better as it was not sucking in wet moist air.
However when I placed my 8,000 BTU window unit in the room, it did deliver the same amount of cooling as DeLonghi PACN130HPE 13,000 BTU unit did, but still I gained the advantage from my window unit that the humidity level dropped much lower so it still felt even much better.
While the DeLonghi PACN130HPE 13,000 BTU unit did cool the room as much as my 8,000 BTU window unit did, it could not remove nearly as much humidity because the DeLonghi PACN130HPE is always sucking in wet moist air continuously. My window units did not do that. Besides my 8,000 BTU unit cooling the room exactly as much as DeLonghi PACN130HPE 13,000 BTU unit, I was much further ahead of the game by the fact the room was dry and not humid/muggy as had the DeLonghi PACN130HPE had made it.
The DeLonghi PACN130HPE did surprisingly little to remove the humidity from the room because it was constantly replacing the humidity through the incoming air. Its gains were constantly being eroded away by the constant losses.
Removing humidity from the room and removing it from the air is not the same things. The outside air may have a 80% humidity level. That is very sticky and muggy. You want the inside air below a 30% humidity level to feel very comfortable with. The DeLonghi PACN130HPE did remove humidity from the air but did not remove it from the room because the moisture being removed the air was being replaced at a equivalent level by in incoming air the DeLonghi PACN130HPE had to suck back into the room as it used room air to carry the heat and humidity it captured back outside. So as fast as it threw humidity outside it was sucking it back into the home at the same rate so there never was a drop in the room humidity level.
Be aware of what they won't tell you.
Another fact I did not like about the DeLonghi PACN130HPE was that it took up significant floor space in my room making it look and feel even more crowded. I would much rather have a window unit that uses 70% less electricity than the DeLonghi PACN130HPE as it does so much better at making the room more comfortable and humid free. My 8,000 BTU window unit for $300did a better job than DeLonghi PACN130HPE for $500as it uses 70% less electricity.
The advantage of the DeLonghi PACN130HPE was that it easily rolled around from room to room and in 60 seconds could be connected to virtually any window for quick temporary very inefficient cooling. I will say inefficient cooling is still much better than no cooling. I almost kept the DeLonghi PACN130HPE because I have another mobile home that needs remodeling and the DeLonghi PACN130HPE would be super quick and easy to set up in whatever room I happened to be working in that particular day, and then move it to another room the next day. My 8,000 BTU window unit takes 5 minutes to set up in any particular room. It weighs 40 pounds and does not roll around so I have to carry it from window to window. So what?
The advantages of the DeLonghi PACN130HPE were not large enough to justify keeping it for short term temporary cooling so I took it back to Lowes and traded it in for a 24,000 BTU window unit that really kicks ass for the same exact money. My 24,000 BTU window unit gives me 300% more cooling than the DeLonghi PACN130HPE does.
The DeLonghi PACN130HPE did have a good digital thermostat that held the room temp even without much fluctuation. It was attractive looking for what it was, a floor space user upper.
The DeLonghi PACN130HPE was not a total flop, but it was a far cry from what they claim and advertise it to be. Matter of fact, it was so far from the truth that I call it a gimmick and fake AC unit. Hope this helps you.
Best Deals for DeLonghi PACN130HPE Portable Air Conditioner
I would say this has the cooling capacity of a 4,000 btu unit... No where near worth the expense of running a (supposed) 14,000 btu AC.The room stays warm and even with the temp outside at 80 the room never get lower than 75... It's going back to the store for a window unit.
(Update) Keep in mind this is a 14,000 Btu unit.... I just replaced it with a 12,000 BTU window AC and the room temp difference is huge. I wish this unit had worked.. It seems like a great idea... But it needs a redesign.
Honest reviews on DeLonghi PACN130HPE Portable Air Conditioner
I love this product. The only problem I had was when I got it, the wheels were damaged so it was no longer portable. But a quick run to Home Depot and I was back in business. I LOVED the fact that I didn't have to empty any water. I would definitely recommend this product.Find helpful customer reviews and review ratings for DeLonghi PACN130HPE Portable Air Conditioner
Bought it from Costco , amazed how strongly it cooled down like a real conventional wall Ac. have only tried it for one day , but so far the best compare to the previous ones , LG , Sharp quiet Library quiet ...Friday, March 21, 2014
Q-Mark MLY 5KW 240V UNIT HEATER *, HUH524TA Reviews
208/240v Electric Heater
Step 1: I wanted to work comfortably in an attached 22 x 22 (9 foot high drywalled ceiling) garage in the winter. Figuring I'd need lots of heat, I bought a portable 40,000 btu propane heater. It exhausts lots of carbon monoxide, so you have to partially open a door or window to the outside to let [cold] fresh air in -which seriously lowers heater efficiency. The heater warmed the garage, but the approach wasn't satisfactory -i.e., the fumes were so bad, I stopped using it. It was also very loud, like the hissing of escaping air from a large air boat; plus, when the propane tank ran out, the heater stopped; each time you needed heat, you had to drag it out, connect it to the tank, leave plenty of floor space around this self-contained-blowtorch; put it all away when you were done; and of course find a place to store it. Also, there was no thermostat. All in all, a royal pain in the keister. (Google search on: "propane heater carbon monoxide" to read about the serious risk of carbon monoxide from propane heaters.)
Step 2: I bought one of these electric heaters. It has only half the btu's of the propane unit, but there is no need to open a window or door for ventilation. It also has a thermostat, so you can set it (to a number, not a temperature), and come back 30 minutes later and be in relative comfort. On days in the low 30s, it will keep the garage in the 60s, which is fine for working.. (My attached garage ceiling and 2 walls are insulated.) My heater is mounted high up on a wall, but it can also be mounted to hang from the ceiling, as long as the clearances laid out in the instructions, are followed. In any case, once mounted, it is out of the way, and always ready. There's nothing to haul out or set up when you need heat -just turn it on. When done, just turn it off. This heater needs a dedicated 30-amp 220-volt circuit. You wouldn't want to use this every day, due to electricity costs, but for occasional use, it is perfect.
My advice is to skip step 1.
Note: As of this writing, Amazon sells this heater under several names:
Fahrenheat Ceiling-Mount Automatic 5000 Watt Electric Heater, Model# FUH5-4
Fahrenheat/Marley FUH54 Suspended Electric Heater
Dayton G73 Electric Garage Heater
Multi-Watt Horizontal Downflow Unit Heater With Thermostat 208/240v
These are all the same heater; it is manufactured by Marley Engineered Products of Bennettsville, South Carolina.
Step 1: I wanted to work comfortably in an attached 22 x 22 (9 foot high drywalled ceiling) garage in the winter. Figuring I'd need lots of heat, I bought a portable 40,000 btu propane heater. It exhausts lots of carbon monoxide, so you have to partially open a door or window to the outside to let [cold] fresh air in -which seriously lowers heater efficiency. The heater warmed the garage, but the approach wasn't satisfactory -i.e., the fumes were so bad, I stopped using it. It was also very loud, like the hissing of escaping air from a large air boat; plus, when the propane tank ran out, the heater stopped; each time you needed heat, you had to drag it out, connect it to the tank, leave plenty of floor space around this self-contained-blowtorch; put it all away when you were done; and of course find a place to store it. Also, there was no thermostat. All in all, a royal pain in the keister. (Google search on: "propane heater carbon monoxide" to read about the serious risk of carbon monoxide from propane heaters.)
Step 2: I bought one of these electric heaters. It has only half the btu's of the propane unit, but there is no need to open a window or door for ventilation. It also has a thermostat, so you can set it (to a number, not a temperature), and come back 30 minutes later and be in relative comfort. On days in the low 30s, it will keep the garage in the 60s, which is fine for working.. (My attached garage ceiling and 2 walls are insulated.) My heater is mounted high up on a wall, but it can also be mounted to hang from the ceiling, as long as the clearances laid out in the instructions, are followed. In any case, once mounted, it is out of the way, and always ready. There's nothing to haul out or set up when you need heat -just turn it on. When done, just turn it off. This heater needs a dedicated 30-amp 220-volt circuit. You wouldn't want to use this every day, due to electricity costs, but for occasional use, it is perfect.
My advice is to skip step 1.
Note: As of this writing, Amazon sells this heater under several names:
Fahrenheat Ceiling-Mount Automatic 5000 Watt Electric Heater, Model# FUH5-4
Fahrenheat/Marley FUH54 Suspended Electric Heater
Dayton G73 Electric Garage Heater
Multi-Watt Horizontal Downflow Unit Heater With Thermostat 208/240v
These are all the same heater; it is manufactured by Marley Engineered Products of Bennettsville, South Carolina.
Thursday, January 16, 2014
Discount PayandPack - Replacement Fireplace Fan Blower for Heat Surge Real
Customer Ratings: 
List Price: $59.99
Sale Price: $25.00
Today's Bonus: 58% Off

The item arrived a day early and I installed it in about 45 minutes. Checked out works as expected. Was going to throw out the Amish fireplace but I am glad I waited. It has a new life now . Will see how long it lasts The others are 3 years old and still running. At least there is a place to buy parts for repair. .

List Price: $59.99
Sale Price: $25.00
Today's Bonus: 58% Off

The item arrived a day early and I installed it in about 45 minutes. Checked out works as expected. Was going to throw out the Amish fireplace but I am glad I waited. It has a new life now . Will see how long it lasts The others are 3 years old and still running. At least there is a place to buy parts for repair. .
Click Here For Most Helpful Customer Reviews >>
My last blower went out and I thought I was going to have to throw away my electric fireplace. I had a heat surge Amish wood built electric fireplace and we loved it. The blower started making terrible noises, thumping loudly. I knew the blower went and when I tried to get the part replaced through Heat surge they first told me they wouldn't sell me any parts, then told me $90!! I found this on amazon and now my electric fireplace is working perfectly. My kids get up in the morning and turn it on, we run it most of the day as we live in an older house with no insulation. Installation instructions didn't exist, and getting the fireplace apart took some time but taking off the old one and replacing the new was self explanatory and easy.Best Deals for PayandPack - Replacement Fireplace Fan Blower for Heat Surge Real
Not too powerful, but works great during early Spring and early Autumn. So Quiet, I sometimes forget it's still on.Honest reviews on PayandPack - Replacement Fireplace Fan Blower for Heat Surge Real
Bought this to replace a very efficient but noisy fireplace fan blower. Now I have an very efficient but very quiet one. It's so quiet you might not think it's working but it really throws the heat out.Find helpful customer reviews and review ratings for PayandPack - Replacement Fireplace Fan Blower for Heat Surge Real
I have a ventless gas wall heater that needed a little circulation. This unit is so quiet and efficient. I bought an 80 degree thermal switch to allow it to turn on when warm and off when no heat is produced. The unit has a thermostat so everything is automatic. Our house is 115 years old and made of adobe and brick with plaster. The furnace does really well until it gets to be 10 degrees or below outside and the extra heat from this unit is great. Also, I feel better having the backup in case I am away and the electricity goes out. Of course, the little fan won't blow but the pipes won't freeze. The price was great and was shipped well packed. It can be attached with sheet metal screws easily and with the automatic thermostat it is self maintaining.Sunday, January 5, 2014
Review of Sunbeam Hot Shot Beverage Machine
This is a marvelous appliance because it is just so darn simple! I bought one to keep in my office at work for making tea, and it has worked out great!
There isn't even an on/off switch. Just put water in it, plug it in, and a red light goes off when it is ready to pour. Put a mug under the dispenser, push the lever, and there you go!
One reviewer said that it does not have a fill-to line, and so water can spill over. I don't see this as a problem. Just heat as much water as you need. I fill up my mug with hot water, pour the water into the appliance, and dispense the water when it is hot back into the mug. Oddly enough, I get out exactly the same amount as I put in! Don't try to heat more than 16 ounces at a time.
The Hot Shot does only one thing, but boy does it do it well! Easy to use, simple to clean, and attractive on the counter. Love having hot tea without fussing with heating water in the office microwave!
Anyway, it's been described in the other reviews but I'll add this: Its design is very simple. You plug it in, sit it on your counter top, lift the lid and pour in a couple mugfuls of water (there is a line to show you how much is two cups exactly).
You close the lid, and then you push down the button in front. The light goes on. When the light goes green (if memory serves; it's either that or goes off but either way it's sooo simple to figure out) the water is boiling hot. (By the way, if you are vision impaired -you can hear the water boiling, and when the sound stops you know it is ready. It is a gentle soothing 'steam' sound). Now, you just put your mug or soup bowl underneath it (there is a stand/base, and the water tank is on top of that) and push the button down.
The hot water pours out of the water tank into the soup bowl or mug. It is that simple ! And it really does take two minutes. I've tried boiling water in a microwave; it does not get hot enough. This really does the trick. The water is boiling hot but not bubbling. I never hurt myself with the temperature of this water; you will want to keep small kids away from it though, like you would with any hot water. There is no latch on the lid, so if they pulled it down off the counter the water might come out and burn them.
But that isn't likely to happen, because the cord is short. Just push it back far on the counter top. Another safety feature is, it does shut itself off once the water is done boiling. When I ignored it, I would have to boil it again but that's good; I'd rather re boil it than have it totally scalding or simmering all day.
The best part is you can use Hot Shot for many things. I made instant mashed potatoes with it, and usually just tea or hot chocolate. It is the ideal appliance for anyone in a small living area such as a dorm or studio apartment. It is even good to have in one's bedroom if you share living quarters. You could have your morning coffee or tea before facing the roommates !
If there is a downside it is that it only boils water. You can't heat soup in it but then I like it that way ! I had a hot POT in college and never used it after the first time. I hated cleaning old soup out of there ! It's much easier and neater to just boil water in the Hot SHOT and use instant soup powder in a mug.
I had the Hot Shot for a long time and it never needed cleaning inside. But there is an easy to understand user's manual with it, that explains how to clean it out if calcium deposits do settle in from the water over the years. All in all I recommend this with the highest rating. It remains one of my all time favorite small appliances for its ease of use and for its simplicity ! I used it every day ! Also it does not take up much room on the counter top.
I did find that some mugs don't fit under the dispenser, and some mugs dribble when you pour into the compartment. Also, sometimes with a mix like cocoa, when you pour the water into the cup, the inside of the cup area gets dirty. However, I solved all these problems. I got a 2 cup glass measuring cup. It fits perfectly under the dispenser, pours with no drips into the water compartment, and will leave no mess behind. Simply measure the water you need, pour it into the dispenser, dispense the water back into the measuring cup, and pour it where needed. I leave the measuring cup in the Hot Shot when not in use.
I had my Hot Shot for seven years and it worked like new until I accidentally melted the cord. If I hadn't done that, I am sure it would still be working. My new one works fine, too, and I wasn't going to buy one until I quickly remembered how long the kettle took!
~~ It's STILL going strong -utterly and totally reliable.
~~ Actually keeps a large mugful of water hot for a decent time 'til you get around to pouring, because of the metal interior (hope this newer model still has it).
~~ No exposed element inside or out. Interior of ours has never needed cleaning (although we did treat it to a lil vinegar run maybe twice in nearly two decades!).
~~ Exterior is plastic so never any accidental finger or hand burns.
~~ GREAT for all those recipes calling for just a small amount of hot water which of course one always forgets to heat ahead of time.
~~ Low, small, tidy, fits ANYWHERE : kitchen counter or island, desktop at work, basement workbench, etc etc etc etc.
Quite a shame that we Americans have almost completely defected to those larger British-style electric water kettles, making the wonderful Hotshot VERY tough to find any more. I suppose those elec kettles are okay if you simply *must have* more than a mugful of hot water -or if you get old and forgetful like me and completely burn up your poor old traditional stovetop whistling kettle. HOWEVER, as far as we can recall, also according to our experience -the Hotshot was the first and we think still the absolute best of the "just-hot-water-nothing-else-&-fast-please" appliances on the American market.
We prob'ly better get another one here quick before it disappears off the market entirely. And if the one we have poops out, we'll just have to inform the manufacturer about what a shoddy product it was to have lasted 'only' 20 years, lolol. Hmm now I think about it though, that COULD be why it's so hard to find :: maybe it NEVER breaks or stops, no 'planned obsolescence,' so nobody really needed another one?!
There isn't even an on/off switch. Just put water in it, plug it in, and a red light goes off when it is ready to pour. Put a mug under the dispenser, push the lever, and there you go!
One reviewer said that it does not have a fill-to line, and so water can spill over. I don't see this as a problem. Just heat as much water as you need. I fill up my mug with hot water, pour the water into the appliance, and dispense the water when it is hot back into the mug. Oddly enough, I get out exactly the same amount as I put in! Don't try to heat more than 16 ounces at a time.
The Hot Shot does only one thing, but boy does it do it well! Easy to use, simple to clean, and attractive on the counter. Love having hot tea without fussing with heating water in the office microwave!
Click Here For Most Helpful Customer Reviews >>
This is one of my favorite small appliance products ever. I got one of these in the 1980s and it lasted me for years and years. I gave it away to charity and have searched for one since then ! I thought I'd get a new one and it would look 'new' therefore better. But it was still working perfectly when I gave it away. I only hope whoever got it, knew how to use it and likes it as much as I did ! I can't find another one now ! LOLAnyway, it's been described in the other reviews but I'll add this: Its design is very simple. You plug it in, sit it on your counter top, lift the lid and pour in a couple mugfuls of water (there is a line to show you how much is two cups exactly).
You close the lid, and then you push down the button in front. The light goes on. When the light goes green (if memory serves; it's either that or goes off but either way it's sooo simple to figure out) the water is boiling hot. (By the way, if you are vision impaired -you can hear the water boiling, and when the sound stops you know it is ready. It is a gentle soothing 'steam' sound). Now, you just put your mug or soup bowl underneath it (there is a stand/base, and the water tank is on top of that) and push the button down.
The hot water pours out of the water tank into the soup bowl or mug. It is that simple ! And it really does take two minutes. I've tried boiling water in a microwave; it does not get hot enough. This really does the trick. The water is boiling hot but not bubbling. I never hurt myself with the temperature of this water; you will want to keep small kids away from it though, like you would with any hot water. There is no latch on the lid, so if they pulled it down off the counter the water might come out and burn them.
But that isn't likely to happen, because the cord is short. Just push it back far on the counter top. Another safety feature is, it does shut itself off once the water is done boiling. When I ignored it, I would have to boil it again but that's good; I'd rather re boil it than have it totally scalding or simmering all day.
The best part is you can use Hot Shot for many things. I made instant mashed potatoes with it, and usually just tea or hot chocolate. It is the ideal appliance for anyone in a small living area such as a dorm or studio apartment. It is even good to have in one's bedroom if you share living quarters. You could have your morning coffee or tea before facing the roommates !
If there is a downside it is that it only boils water. You can't heat soup in it but then I like it that way ! I had a hot POT in college and never used it after the first time. I hated cleaning old soup out of there ! It's much easier and neater to just boil water in the Hot SHOT and use instant soup powder in a mug.
I had the Hot Shot for a long time and it never needed cleaning inside. But there is an easy to understand user's manual with it, that explains how to clean it out if calcium deposits do settle in from the water over the years. All in all I recommend this with the highest rating. It remains one of my all time favorite small appliances for its ease of use and for its simplicity ! I used it every day ! Also it does not take up much room on the counter top.
Best Deals for Sunbeam Hot Shot Beverage Machine
I had a Hot Shot for many years. I never had a problem with it, and we used ours for everything. Water for tea, coffee, cocoa, instant soups and oatmeal, and other hot drink mixes. The water boils so fast that the only time I use a kettle is if I am making a pot of tea. For a couple of cups of tea, filling the Hot Shot twice is still faster!I did find that some mugs don't fit under the dispenser, and some mugs dribble when you pour into the compartment. Also, sometimes with a mix like cocoa, when you pour the water into the cup, the inside of the cup area gets dirty. However, I solved all these problems. I got a 2 cup glass measuring cup. It fits perfectly under the dispenser, pours with no drips into the water compartment, and will leave no mess behind. Simply measure the water you need, pour it into the dispenser, dispense the water back into the measuring cup, and pour it where needed. I leave the measuring cup in the Hot Shot when not in use.
I had my Hot Shot for seven years and it worked like new until I accidentally melted the cord. If I hadn't done that, I am sure it would still be working. My new one works fine, too, and I wasn't going to buy one until I quickly remembered how long the kettle took!
Honest reviews on Sunbeam Hot Shot Beverage Machine
The Sunbeam Hot Shot is the absolute best when it comes to quickly boiling water for hot chocolate, Top Ramen, coffee and tea. A cup of water boils in 45 seconds. Unlike boiling water in a microwave, the cup doesn't heat up and there is no danger of the cup exploding due to the microwaves intense heating of water. Plus, it doesn't take up any space and you can store it when not in use. This would make a great gift for the college student in the dorm or the office jockey who is too busy to leave his or her desk to make a quick cup of anything...Find helpful customer reviews and review ratings for Sunbeam Hot Shot Beverage Machine
We were given a Sunbeam Hotshot beverage machine as a housegift possibly the first year it came on the market -anyway we've had the very same one since back in the early to mid 1980s :::~~ It's STILL going strong -utterly and totally reliable.
~~ Actually keeps a large mugful of water hot for a decent time 'til you get around to pouring, because of the metal interior (hope this newer model still has it).
~~ No exposed element inside or out. Interior of ours has never needed cleaning (although we did treat it to a lil vinegar run maybe twice in nearly two decades!).
~~ Exterior is plastic so never any accidental finger or hand burns.
~~ GREAT for all those recipes calling for just a small amount of hot water which of course one always forgets to heat ahead of time.
~~ Low, small, tidy, fits ANYWHERE : kitchen counter or island, desktop at work, basement workbench, etc etc etc etc.
Quite a shame that we Americans have almost completely defected to those larger British-style electric water kettles, making the wonderful Hotshot VERY tough to find any more. I suppose those elec kettles are okay if you simply *must have* more than a mugful of hot water -or if you get old and forgetful like me and completely burn up your poor old traditional stovetop whistling kettle. HOWEVER, as far as we can recall, also according to our experience -the Hotshot was the first and we think still the absolute best of the "just-hot-water-nothing-else-&-fast-please" appliances on the American market.
We prob'ly better get another one here quick before it disappears off the market entirely. And if the one we have poops out, we'll just have to inform the manufacturer about what a shoddy product it was to have lasted 'only' 20 years, lolol. Hmm now I think about it though, that COULD be why it's so hard to find :: maybe it NEVER breaks or stops, no 'planned obsolescence,' so nobody really needed another one?!
Friday, December 13, 2013
Review of Friedrich KWIKS window installation kit for Kuhl+ series - S
Tuesday, December 10, 2013
Cheap Sunbeam Foot Cuddler Heated Mattress Pad
Customer Ratings: 
List Price: $47.82
Sale Price: $39.95
Today's Bonus: 16% Off

As long as you understand what this product is used for, you will love it! It is just what it says it is: a foot warmer, not a full mattress pad. The measurements are missing from the item description, which is bad marketing. The Twin/Full sized pad measures about 24x34 inches and it sits on top of your mattress pad and under the top sheet. Even though it doesn't have straps that wrap around the corners of the mattress, it doesn't move around at all. It also has nice long cords for the plug in and the controller. The controller has three settings and each setting has a different color so you can tell what the setting is without having to read the printing (very handy at night). My problem is that I can't sleep if my feet are cold and I don't like wearing socks to bed, but I don't need a full electric mattress pad or blanket. This foot warmer keeps my feet warm and I fall asleep faster. It is just what I needed.
First, even on the lowest heat setting, the warmer gets so hot by the middle of the night that it is unbearable and has to be turned off. It seems not to be thermostatic. It has only 3 heat settings, not a continuously variable dial for adjusting heat.
It has no automatic shutoff.
The control to change the temperature and turn the unit off has blindingly bright lights that make my whole bedroom bright. Pushing the button successively (there is no dial) to make the unit turn off or change heat setting is VERY noisy, waking up my spouse. The control also doesn't have a flat bottom, so it won't rest in a reasonable position on the side table. The bottom is rounded for some unknown reason. No sensible person would put something like that under their pillow, so I'm not sure where the manufacturer thinks you are going to put it.
Finally, the place where the cord plugs into the warmer itself is a HUGE lump that is right in the middle of the warmer, exactly where my feet constantly hit it. Why would it have been hard to put it off the edge of the bed or off to the side of the warmer?
Unfortunately, I'm not aware of any competing product.
Update 1/2/13. The picture has been updated and now does show the correct product. I am still using my foot cuddler. It is not as warm as it once was, but it provides enough heat to keep my feet warm. I have found that any of these type of heaing products will wear out, (especially if you use them as much as I do) so I expect that I will have to buy another one soon. They never last as long as the warranty (heating pads and electric blankets). so I will have to start keeping track of the receipts, etc. (I sleep much better in the winter with the extra warmth, so I would purchase again without the warranty.) The price has gone up since I purchased my first one in December 2009. Hopefully the price will be lower in the spring.

List Price: $47.82
Sale Price: $39.95
Today's Bonus: 16% Off

As long as you understand what this product is used for, you will love it! It is just what it says it is: a foot warmer, not a full mattress pad. The measurements are missing from the item description, which is bad marketing. The Twin/Full sized pad measures about 24x34 inches and it sits on top of your mattress pad and under the top sheet. Even though it doesn't have straps that wrap around the corners of the mattress, it doesn't move around at all. It also has nice long cords for the plug in and the controller. The controller has three settings and each setting has a different color so you can tell what the setting is without having to read the printing (very handy at night). My problem is that I can't sleep if my feet are cold and I don't like wearing socks to bed, but I don't need a full electric mattress pad or blanket. This foot warmer keeps my feet warm and I fall asleep faster. It is just what I needed.
Click Here For Most Helpful Customer Reviews >>
The idea of having an electric foot warmer is wonderful and just what I need. However, the design of this product makes it almost unusable for me.First, even on the lowest heat setting, the warmer gets so hot by the middle of the night that it is unbearable and has to be turned off. It seems not to be thermostatic. It has only 3 heat settings, not a continuously variable dial for adjusting heat.
It has no automatic shutoff.
The control to change the temperature and turn the unit off has blindingly bright lights that make my whole bedroom bright. Pushing the button successively (there is no dial) to make the unit turn off or change heat setting is VERY noisy, waking up my spouse. The control also doesn't have a flat bottom, so it won't rest in a reasonable position on the side table. The bottom is rounded for some unknown reason. No sensible person would put something like that under their pillow, so I'm not sure where the manufacturer thinks you are going to put it.
Finally, the place where the cord plugs into the warmer itself is a HUGE lump that is right in the middle of the warmer, exactly where my feet constantly hit it. Why would it have been hard to put it off the edge of the bed or off to the side of the warmer?
Unfortunately, I'm not aware of any competing product.
Best Deals for Sunbeam Foot Cuddler Heated Mattress Pad
I bought this last year and it has worked great, although I use this as a heated pet bed and not as a foot warmer. When placed under my dog's normal bed (which is about 2-3 inches thick), it provides a very soft and subtle heat that he seems to like. He is a very large dog (~85 lbs) so to buy an actual heated pad for him would have been close to $100. The only problem is the cat now sleeps in the middle of my dog's warm and cozy bed, and my dog is too polite to do anything about it so I might need to get another one. :)Honest reviews on Sunbeam Foot Cuddler Heated Mattress Pad
I love this product. I bought the twin size (because it was cheaper), even though I have a california king size bed. (I'm the only one in the bed.) I was used to sleeping with a heating pad or two. I agree that the description is lacking and it is a flat pad that goes under the sheets, but it works great for me, and I think that the twin size might work for 2 people. The only other thing that I would mention as a negative would be the place where the cord plugs into the pad creates a bump which might bother some people.Update 1/2/13. The picture has been updated and now does show the correct product. I am still using my foot cuddler. It is not as warm as it once was, but it provides enough heat to keep my feet warm. I have found that any of these type of heaing products will wear out, (especially if you use them as much as I do) so I expect that I will have to buy another one soon. They never last as long as the warranty (heating pads and electric blankets). so I will have to start keeping track of the receipts, etc. (I sleep much better in the winter with the extra warmth, so I would purchase again without the warranty.) The price has gone up since I purchased my first one in December 2009. Hopefully the price will be lower in the spring.
Find helpful customer reviews and review ratings for Sunbeam Foot Cuddler Heated Mattress Pad
Purchased two foot cuddlers to add a little warmth in the foot area of our beds. So far, results are so-so. We pre-heat the bed on high, then turn the controller on low or sometimes medium, which we find to be more than comfortable. There are three heat settings and no auto-shut off. We agree with the reviewer who said, "The control to change the temperature and turn the unit off has blindingly bright lights that make my whole bedroom bright. Pushing the button successively (there is no dial) to make the unit turn off or change heat setting is VERY noisy, waking up my spouse. The control also doesn't have a flat bottom, so it won't rest in a reasonable position on the side table. The bottom is rounded for some unknown reason. Finally, the place where the cord plugs into the warmer itself is a HUGE lump that is right in the middle of the (bottom edge of the) warmer, exactly where my feet constantly hit it." We find these things to be somewhat annoying, but have not found any other similar product. The picture online is wrong and the description is vague. This is a rectangular pad with rounded corners, which is 45 X 24" in the twin/full size. It just lies on top of the bed. We put ours under the mattress pad and sheet. The heating wires do not extend right to the edge; instead they stop about 2-3 inches, all around, from the edge. I'm not sure how you would use this on a twin bed, as the instructions state to NOT bend the pad/wires and a twin bed is only 39" wide. It would work well for a full-sized bed. We use one on a queen-sized, as the queen version was unavailable. The one other problem we have had is that one of the pads was heating very unevenly. Almost nothing on one side, much more on the other. For that reason and the fact that it doesn't really fit a twin-sized bed, we returned it. We have kept the one we use on the queen-sized bed, will update on reliability, if needed, in the future. At this point, would probably purchase again.Wednesday, December 4, 2013
Cheap Lasko 4924 High Velocity Blower Fan With Handle
I have central AC, but my home office is typically a few degrees warmer than the rest of the house. I decided to add a fan to help cool the area off, but I wanted the quietest fan that did the job. I ended up ordering the following three fans through Amazon for comparison:
Lasko 4924 Space-Saving High-Velocity 3-Speed Oscillating Blower Fan (HVB)
Honeywell Digital Tower Fan with Remote and Ionizer
Lasko 42 In. Wind Curve Tower Fan
I'll start with the quick summary for the TL;DR crowd. In terms of air flow, from highest to lowest, the ranking is: HVB >> Wind Curve > Honeywell. In terms of noise, from loudest to quietest: HVB > Honeywell > Wind Curve. Thus, the fan with the best air flow for the noise generated, and the one I picked, was the Lasko Wind Curve.
And now for the details, for those that don't suffer from ADD. Wall of text inc.
Power Usage
I was able to measure power usage for each fan using a Kill-A-Watt meter. All 3 fans had 3 output settings (low/med/high), and I measured their power usage to be:
HVB 95/103/111 watts
Honeywell 32/36/40 watts
Wind Curve 37/41/47 watts
Noise
I used an SPL meter app on my iPhone to measure how loud each fan was at each of those settings. All of the fans were tested in the same spot and the iPhone was placed on a stand about 5 ft away, in front and slightly to the side of each fan, so that wind noise didn't factor into the measurements:
HVB 59/61/64 db
Honeywell 50/53/55 db
Wind Curve 46/49/51 db
Air Flow
I don't have a way to measure each fan's output objectively, so these are my impressions:
HVB Lasko wasn't kidding when they labeled the 4924 with the acronym HVB for High Velocity Blower. When I first got it and ran it on *low*, I was thinking that this would be really good air flow for a quality fan on its *high* setting. It's by far the highest output fan here. They also described it as having a quiet motor; while this might be true, it's still the loudest of the bunch. Having the smallest vent opening of the bunch might have contributed to the noise level. Another user review I read of this fan said it feels like AC with this fan running, and that's true. If you're partially deaf, or plan on placing the fan 20 ft or more away from you, this is a good choice.
Honeywell and Wind Curve The output of these two fans are more comparable. I still feel the Wind Curve puts out a little more air flow than the Honeywell at the equivalent setting though. For some reason, even the Wind Curve feels like AC is running, if only on low. There's an uncanny cooling effect the Lasko fans have that the Honeywell doesn't. Maybe it's just better airflow at a lower noise level. If you look at the measurements above, the Wind Curve on high is only slightly louder than the Honeywell on low. I mostly ran these fans on low--as I was looking for the quietest solution--and at times, I still felt warm with the Honeywell, but the Wind Curve delivers. The Honeywell does have a filter on the back intake side, which probably hurts its air flow a bit. You can hear a *very* slight ticking sound from the Wind Curve at times, sort of like fast crickets. I haven't found it annoying and it doesn't sound like something's wearing out. It's probably only noticeable because of its low noise level.
Size / Weight / Appearance
Exact dimensions and weight can be found on their Amazon product pages, so I won't provide specific numbers. All of them were delivered in their product boxes, which were all somewhat beatened up from being delivered by UPS.
The HVB is the shortest, but also the heaviest. Both the Honeywell and the Wind Curve are noticeably lighter than the HVB. It's shipped as a single piece and there's nothing to assemble. You take it out of the box and it's ready to go. It has a low center of gravity and stands up stably. All tower fans should be designed this way. It has horizontal flaps that can be adjusted to direct airflow up. The flaps are really small, but they seem to work decently.
The Honeywell is about a foot taller than the HVB. It's shipped in 5 pcs that have to be assembled--the main body, 2 pieces that join together to form the circular base, and another 2 pcs that join together to form an "optional" pedestal that sits between the base and the body. I wouldn't really call the pedestal optional, as without it the vent opening starts about 5-6" off the ground and there are no flaps to adjust the airflow up. I found assembling the unit difficult to do by myself. It's just not easy holding these pieces so they line up while you screw them together. In fact, little plastic fragments broke off while I was assembling it. I assume they were all internal and non-essential, as the product looks fine once assembled. The manual cautions that using the pedestal makes the unit less stable, and that is true. It's the wobbliest of the bunch, but it won't tip over easily. A sturdier base and pedestal would have made this a lot less wobbly. The black plastic in the product pictures looks really nice and shiny, but not as good in person.
The Wind Curve is a few inches taller than the Honeywell, making it the tallest of the bunch. It's shipped in 3 pcs--the main body and 2 pcs that join together to form its circular base. Assembling this unit still wasn't easy to do solo, but it was easier than dealing with the Honeywell and its body-pedestal-base. The base on this feels a little sturdier than the Honeywell's, and the assembled unit is less wobbly, though still not perfect. There are some horizontal flaps to direct the airflow up, but these only cover the top third of the vent. None of the online pictures I've seen for this fan do it any justice. The wood accent makes the unit look really nice in person.
Controls
The HVB only has physical controls. There's a knob that controls the fan speed, from left to right: low-mid-high-off. There's a separate push button that turns the oscillation on/off. There's no remote, no timer, and no ionization function.
The Honeywell has digital controls and comes with a remote. There's an LCD window that shows the air temperature, fan speed, and timer. It has one nice ability that neither of the Laskos have, and that's the ability to turn on/off at a preset temperature, just like the HVAC system in a home. Although the controls are all digital, half of the six buttons have shared functions. There's a single button that controls the fan speed and turning the unit on/off and it cycles from: high-med-low-off. So if you want to turn the fan on and run it on low, that's 3 clicks. There's also a single button that controls oscillation and ionization, and it cycles between: oscillate only-oscillate & ionize-ionize only-neither. The third shared function button controls how the unit turns off, either by timer or temperature. The timer can be set in 1 hr increments, from 1-12 hrs I believe. Two buttons are labeled up/down, which can only be used for setting the timer or temperature. The last button is for a "breeze" feature that is unique to this fan, which essentially just varies the fan speed. There's two breeze modes, one varies the speed between the current speed and the next setting below it (high-med, med-low, low-off), and the other just varies the speed between high-med-low. I found the noise level changes from this feature to be too distracting. The remote has five of the six buttons that the unit has, lacking the button to enable the timer/temp mode. Oddly, up/down arrows exist on the remote, but are only useful if you're already in the timer/temp mode. However, if you're using the remote, chances are you can't read the display to see what the timer/temp setting is anyways. The other side of the remote has a button which controls an LED flashlight.
The Wind Curve also has digital controls and comes with a remote. There are a total of 8 leds displaying the status of the fan, from left to right: 4 red leds indicate that the timer is enabled and how much time is left--representing 30 mins, 1 hr, 2 hrs, 4 hr (you add them up to get the total); 3 green leds indicating the fan speed--low, med, high; and 1 blue led indicating whether ionization is on/off. There's 5 buttons controlling the fan, the same on the unit as on the remote--power, oscillate, timer (adds 30 mins to the timer with every click), ionization, and fan speed (cycles between high-med-low). I like that there's a separate control to turn the fan on/off and the fan speed is remembered. The timer setting is a little primitive compared to the Honeywell's though, as it does take 15 clicks if you want the full duration of 7.5 hrs. All of the controls are confirmed with a beep. I think I read a review where someone complained it was too loud, but I found it really faint, even compared to the fan on low. The click of the button on the remote is louder. Although, the confirmation beep for turning the fan off is a little long--lasting about a second--and that could be shorter.
Oscillation
All of the fans have this feature and were quiet enough that I can't hear the difference whether on or off. The Laskos oscillation range appeared to be a little under 90 degrees. When placed in a corner, I don't think anyone would complain about the coverage. The honeywell's oscillation range was a little wider, but it oscillates in one direction a little faster than the other. Sort of like how some sprinklers operate, but the difference in speeds isn't as drastic.
Ionization
The HVB lacked this feature, but I consider it a gimmick anyways. From what I've read, ionized air doesn't freshen up the air, it just impairs your sense of smell. Ionizing air cleaners also operate by charging the air and dust with one charge, and having an oppositely charged plate or filter in front of the air flow to catch the charged dust. Neither of the fans with ionization features have this plate/filter.
---Update----
I was just informed that my review is for a DIFFERENT fan than what is being offered by Amazon. I apologize to everyone who made a misinformed decision. I will remove this review in 10 days (I want people to have the opportunity to read this update.
I will say that my fan seems to be very similar to the one being sold by Amazon.
---------------------------------------------------------------
The Lasko High Velocity Fan/Blower is an outstanding choice for a large/medium sized room. The fan moves a considerable amount of air (see the video) and offers all of the necessary options timer, variable speed, and oscillation.
Pros-
1Very strong this fan moves a lot of air
2The ability to direct the air to the areas that you want Lasko gives you a "Jet Stream" of air.
3Variable speeds 3 speeds for different room sizes or conditions.
4While it is loud it is a steady sound level it is not high pitched or squeeky so it is easy to ignore. In fact, it is perfect for background sound while sleeping.
5Oscillation covers about 45 degrees of rotation.
6While it is not stylish the unit offers a remote control that is perfect for a night stand.
FInal Verdict This is a high-end fanand while it is not inexpensive it is very effective for rooms of up to about 400 sq. ft.
5 stars
Took it to our annual Hula show (Ho'ike) and the ladies were so grateful for me bringing this fan in our changing/dressing rooms. (They always forget to turn the A/C on while we're getting dressed).
I Couldn't find it any where here in Washington State, so I searched the internet. I'm now adding 2 more of these fans to our household.
Love it! Love it! Love it!
Lasko 4924 Space-Saving High-Velocity 3-Speed Oscillating Blower Fan (HVB)
Honeywell Digital Tower Fan with Remote and Ionizer
Lasko 42 In. Wind Curve Tower Fan
I'll start with the quick summary for the TL;DR crowd. In terms of air flow, from highest to lowest, the ranking is: HVB >> Wind Curve > Honeywell. In terms of noise, from loudest to quietest: HVB > Honeywell > Wind Curve. Thus, the fan with the best air flow for the noise generated, and the one I picked, was the Lasko Wind Curve.
And now for the details, for those that don't suffer from ADD. Wall of text inc.
Power Usage
I was able to measure power usage for each fan using a Kill-A-Watt meter. All 3 fans had 3 output settings (low/med/high), and I measured their power usage to be:
HVB 95/103/111 watts
Honeywell 32/36/40 watts
Wind Curve 37/41/47 watts
Noise
I used an SPL meter app on my iPhone to measure how loud each fan was at each of those settings. All of the fans were tested in the same spot and the iPhone was placed on a stand about 5 ft away, in front and slightly to the side of each fan, so that wind noise didn't factor into the measurements:
HVB 59/61/64 db
Honeywell 50/53/55 db
Wind Curve 46/49/51 db
Air Flow
I don't have a way to measure each fan's output objectively, so these are my impressions:
HVB Lasko wasn't kidding when they labeled the 4924 with the acronym HVB for High Velocity Blower. When I first got it and ran it on *low*, I was thinking that this would be really good air flow for a quality fan on its *high* setting. It's by far the highest output fan here. They also described it as having a quiet motor; while this might be true, it's still the loudest of the bunch. Having the smallest vent opening of the bunch might have contributed to the noise level. Another user review I read of this fan said it feels like AC with this fan running, and that's true. If you're partially deaf, or plan on placing the fan 20 ft or more away from you, this is a good choice.
Honeywell and Wind Curve The output of these two fans are more comparable. I still feel the Wind Curve puts out a little more air flow than the Honeywell at the equivalent setting though. For some reason, even the Wind Curve feels like AC is running, if only on low. There's an uncanny cooling effect the Lasko fans have that the Honeywell doesn't. Maybe it's just better airflow at a lower noise level. If you look at the measurements above, the Wind Curve on high is only slightly louder than the Honeywell on low. I mostly ran these fans on low--as I was looking for the quietest solution--and at times, I still felt warm with the Honeywell, but the Wind Curve delivers. The Honeywell does have a filter on the back intake side, which probably hurts its air flow a bit. You can hear a *very* slight ticking sound from the Wind Curve at times, sort of like fast crickets. I haven't found it annoying and it doesn't sound like something's wearing out. It's probably only noticeable because of its low noise level.
Size / Weight / Appearance
Exact dimensions and weight can be found on their Amazon product pages, so I won't provide specific numbers. All of them were delivered in their product boxes, which were all somewhat beatened up from being delivered by UPS.
The HVB is the shortest, but also the heaviest. Both the Honeywell and the Wind Curve are noticeably lighter than the HVB. It's shipped as a single piece and there's nothing to assemble. You take it out of the box and it's ready to go. It has a low center of gravity and stands up stably. All tower fans should be designed this way. It has horizontal flaps that can be adjusted to direct airflow up. The flaps are really small, but they seem to work decently.
The Honeywell is about a foot taller than the HVB. It's shipped in 5 pcs that have to be assembled--the main body, 2 pieces that join together to form the circular base, and another 2 pcs that join together to form an "optional" pedestal that sits between the base and the body. I wouldn't really call the pedestal optional, as without it the vent opening starts about 5-6" off the ground and there are no flaps to adjust the airflow up. I found assembling the unit difficult to do by myself. It's just not easy holding these pieces so they line up while you screw them together. In fact, little plastic fragments broke off while I was assembling it. I assume they were all internal and non-essential, as the product looks fine once assembled. The manual cautions that using the pedestal makes the unit less stable, and that is true. It's the wobbliest of the bunch, but it won't tip over easily. A sturdier base and pedestal would have made this a lot less wobbly. The black plastic in the product pictures looks really nice and shiny, but not as good in person.
The Wind Curve is a few inches taller than the Honeywell, making it the tallest of the bunch. It's shipped in 3 pcs--the main body and 2 pcs that join together to form its circular base. Assembling this unit still wasn't easy to do solo, but it was easier than dealing with the Honeywell and its body-pedestal-base. The base on this feels a little sturdier than the Honeywell's, and the assembled unit is less wobbly, though still not perfect. There are some horizontal flaps to direct the airflow up, but these only cover the top third of the vent. None of the online pictures I've seen for this fan do it any justice. The wood accent makes the unit look really nice in person.
Controls
The HVB only has physical controls. There's a knob that controls the fan speed, from left to right: low-mid-high-off. There's a separate push button that turns the oscillation on/off. There's no remote, no timer, and no ionization function.
The Honeywell has digital controls and comes with a remote. There's an LCD window that shows the air temperature, fan speed, and timer. It has one nice ability that neither of the Laskos have, and that's the ability to turn on/off at a preset temperature, just like the HVAC system in a home. Although the controls are all digital, half of the six buttons have shared functions. There's a single button that controls the fan speed and turning the unit on/off and it cycles from: high-med-low-off. So if you want to turn the fan on and run it on low, that's 3 clicks. There's also a single button that controls oscillation and ionization, and it cycles between: oscillate only-oscillate & ionize-ionize only-neither. The third shared function button controls how the unit turns off, either by timer or temperature. The timer can be set in 1 hr increments, from 1-12 hrs I believe. Two buttons are labeled up/down, which can only be used for setting the timer or temperature. The last button is for a "breeze" feature that is unique to this fan, which essentially just varies the fan speed. There's two breeze modes, one varies the speed between the current speed and the next setting below it (high-med, med-low, low-off), and the other just varies the speed between high-med-low. I found the noise level changes from this feature to be too distracting. The remote has five of the six buttons that the unit has, lacking the button to enable the timer/temp mode. Oddly, up/down arrows exist on the remote, but are only useful if you're already in the timer/temp mode. However, if you're using the remote, chances are you can't read the display to see what the timer/temp setting is anyways. The other side of the remote has a button which controls an LED flashlight.
The Wind Curve also has digital controls and comes with a remote. There are a total of 8 leds displaying the status of the fan, from left to right: 4 red leds indicate that the timer is enabled and how much time is left--representing 30 mins, 1 hr, 2 hrs, 4 hr (you add them up to get the total); 3 green leds indicating the fan speed--low, med, high; and 1 blue led indicating whether ionization is on/off. There's 5 buttons controlling the fan, the same on the unit as on the remote--power, oscillate, timer (adds 30 mins to the timer with every click), ionization, and fan speed (cycles between high-med-low). I like that there's a separate control to turn the fan on/off and the fan speed is remembered. The timer setting is a little primitive compared to the Honeywell's though, as it does take 15 clicks if you want the full duration of 7.5 hrs. All of the controls are confirmed with a beep. I think I read a review where someone complained it was too loud, but I found it really faint, even compared to the fan on low. The click of the button on the remote is louder. Although, the confirmation beep for turning the fan off is a little long--lasting about a second--and that could be shorter.
Oscillation
All of the fans have this feature and were quiet enough that I can't hear the difference whether on or off. The Laskos oscillation range appeared to be a little under 90 degrees. When placed in a corner, I don't think anyone would complain about the coverage. The honeywell's oscillation range was a little wider, but it oscillates in one direction a little faster than the other. Sort of like how some sprinklers operate, but the difference in speeds isn't as drastic.
Ionization
The HVB lacked this feature, but I consider it a gimmick anyways. From what I've read, ionized air doesn't freshen up the air, it just impairs your sense of smell. Ionizing air cleaners also operate by charging the air and dust with one charge, and having an oppositely charged plate or filter in front of the air flow to catch the charged dust. Neither of the fans with ionization features have this plate/filter.
Click Here For Most Helpful Customer Reviews >>
We ordered this fan after reading another on-line review. It lives up to its reputation....it is very quiet and gives a good strong breeze when needed. It works so well that it almost feels like it has an 'air conditioning' effect. We love it and would recommend that you purchase this model if you are looking for a silent, strong fan that takes up very little space.Best Deals for Lasko 4924 High Velocity Blower Fan With Handle
This fan was in a cabana I rented for a day by the pool on a day in Florda that hit 93 degrees...I thought I actually had air conditioning outdoors. This fan is QUIET, you can use the oscillation or not. It has 3 speeds (low, med or high). It is quiet at all speeds. It truly made a hot, humid day very comfortable. I tried locating this fan at local stores and couldn't find it, so I was excited to see Amazon had it for sale. You will not be disappointed. It is about $20 more expensive than similar models, but I actually tested this one in the cabana and I was sold. You are not going to regret it!!Honest reviews on Lasko 4924 High Velocity Blower Fan With Handle
---Update----
I was just informed that my review is for a DIFFERENT fan than what is being offered by Amazon. I apologize to everyone who made a misinformed decision. I will remove this review in 10 days (I want people to have the opportunity to read this update.
I will say that my fan seems to be very similar to the one being sold by Amazon.
---------------------------------------------------------------
The Lasko High Velocity Fan/Blower is an outstanding choice for a large/medium sized room. The fan moves a considerable amount of air (see the video) and offers all of the necessary options timer, variable speed, and oscillation.
Pros-
1Very strong this fan moves a lot of air
2The ability to direct the air to the areas that you want Lasko gives you a "Jet Stream" of air.
3Variable speeds 3 speeds for different room sizes or conditions.
4While it is loud it is a steady sound level it is not high pitched or squeeky so it is easy to ignore. In fact, it is perfect for background sound while sleeping.
5Oscillation covers about 45 degrees of rotation.
6While it is not stylish the unit offers a remote control that is perfect for a night stand.
FInal Verdict This is a high-end fanand while it is not inexpensive it is very effective for rooms of up to about 400 sq. ft.
5 stars
Find helpful customer reviews and review ratings for Lasko 4924 High Velocity Blower Fan With Handle
I purchased my first fan in 2003. This fan has ALOT of power. You will feel the fan blowing on any of the 3 settings, unlike many other floor or stand fans, which lack power.Took it to our annual Hula show (Ho'ike) and the ladies were so grateful for me bringing this fan in our changing/dressing rooms. (They always forget to turn the A/C on while we're getting dressed).
I Couldn't find it any where here in Washington State, so I searched the internet. I'm now adding 2 more of these fans to our household.
Love it! Love it! Love it!
Subscribe to:
Posts (Atom)
















